Dongguan Anhong Electronic Technology ABM200 Security and Protection Camera User Manual
- June 6, 2024
- Dongguan Anhong Electronic Technology
Table of Contents
Anthony Electronic Technology ABM200 Security and Protection Camera
User Manual
Dear Customer,
We are truly grateful that you have chosen us as your best product dealer. You
are our most highly valued customers and it has been a sincere pleasure
serving you. We hope that you will enjoy the fantastic quality of our products
and services. We will continue our efforts to meet your requirements and
expectations in the future as well. You suggestions will help us shape our
business to perfectly fit your standards. This user’s manual can help you have
a thorough understanding of this product, and solve any problem that customers
may encounter in using our products. Please read carefully for the user guide
before using the device.
Safety Instructions
Warning
DANGER — Strangulation Hazard — Children have STRANGLED in cords. Keep
the baby camera unit and adaptor cords out of the reach of children more than
3 feet or 1 meter away. Never use extension cords with adaptors. Do not place
the camera or power supply In a child’s cot/alb.
Camera settings and usage
- Fix the camera in a place where can be observed well of children/babies.
- Place the camera on a flat surface such as a dressing table. writing desk or shelf.
- Fix the cable on the wall to keep it away from the baby.
This baby monitor meets all relevant standards related to electromagnetic fields and Is safe to use when operating in accordance with the Instructions of the user guide. Therefore, please read the user guide carefully before using the device.
- Must be assembled by an adult.
- This baby monitor can not be used instead of adult guardianship.
- Keep this user guide in a safe place for future reference.
- Do not cover the baby monitor with a towel or blanket.
- Do not use the baby monitor near water.
- Do not install the baby monitor near a heat source.
- Only use the supplied charger and power adapter. Never use another charger or power adapter as this may damage the device
- Do not touch the plug with a sharp or metal object.
Important notes for installing a baby monitor
- When using your baby device and parent unit, you must be able to establish radio communication between them.
- The communication distance between the two devices is affected by environmental conditions.
- Any large metal objects between two devices may block radio signals. Such as refrigerators, metal doors, or reinforced concrete.
- The strength of the signal may be attenuated by other solid buildings (such as walls), radios, or electrical equipment (such as televisions, and computers).
- If the signal is weak, try moving the device to a different location indoors.
- Do not place the parent unit and the camera in a range of 1 meter, otherwise, it will cause howling.
- Our parent unit has come with a screen protector which is to protect the monitor.
Package Including:
1 X Baby Camera
1 X Parents Unit
1 X User Manual
2 X Power Adapter (5V/2A)
2 X USB Cables
PRODUCT OVERVIEW
Parents Unit Console Overview 
Parents Unit Status bar Icon
| Signal Level (5 Levels)
---|---
No Signal
Camera 1
Camera 2 (Optional)
Camera Switch
Lullaby Switch
Volume Level (6 Levels)
Night Vision Mode
Cry Detection (High, Medium, and Low 3 Modes)
Baby Room Temperature Display
System Time
Battery Power
Intercom Mode
Recording Mode
Parents Unit Status Main Icon
| Volume Level Setting|
---|---|---
Feed Reminder Time Setting (Can Set 5 Alarm Clocks)
Lullaby Selection (8 Lullabies)
Temperature Mode Setting (Celsius / Fahrenheit)
System Time Setting
Camera Setting (Add/Delete/Switch)
VOX Sound Detection Setting
Display Brightness Setting
START USING1.2 Baby Camera overview
2.1 Camera-side Power
- Connect the Micro USB plug of the power adapter to the camera, and the other side to the power outlet, it should connect the power adapter to the 110-220V AC outlet. 2) Once the camera is plugged in, it will automatically turn on and the blue indicator will be on (the night mode will automatically turn off).
2.2 Camera-side Turn On And Off
- Turn on, plug in the USB power cable.
- Turn off, and remove the USB power cable.
2.3 Parent Unit Switching On And Off
- Charge battery for parents’ unit, The process from no power to full charge takes about 3-4 hours. But as long as the parent’s unit is plugged in the USB cable, the machine can be turned on and used.
- Press and hold the power switch key ( ) for 3 seconds to switch on/off the parent’s unit, and pull out the receiving antenna on the parent’s unit.
2.4 Watching The Image Of the Camera
When both the camera side and the parent’s unit are turned on, the display
should be able to display the image taken by the camera. (If the display is
not normal, check the camera pairing pls.)
- If the pairing is not successful, please refer to 2.5 Pairing Instructions for pairing the camera;
2.5 Pairing
Once the camera-side and parents’ unit are both switched on, they will be
paired automatically. If not, follow the steps below: 1) When the camera is
turned on, pls double press the power button ( ) quickly until the blue light
flashes, release the button, it will enter the coding mode. At the same time,
open the parent unit display and press the buttons to turn on the menu. Press
to select and press ok to confirm. In the pop-up bar, continue to press
the A button to select + and press ok to confirm, and then press to choose 1
or 2for pairing. At this time, the red light in the upper left corner of the
display will flashes, when pairing successfully, the light of the camera and
display will stop flashing. The display will show the image of the pairing
camera. If there is no connection for 10 seconds, the coding mode will be
automatically exited.
(Note: one camera just can be connected to one display, but one display can be
connected to two cameras at the same time)
2.6 Formatting Of TF Card
With a new TF card, when the camera is powered on, press and hold the key (3 seconds) to format the TF card. When the blue light flashes twice mean the TF card format is completed, and then you can start recording the video. (The camera’s TF card video can only be viewed on a computer or other device).
CAMERA-SIDE USING
3.1 Installation
- Place the camera in a convenient position so that it can be aimed at the area you want to monitor.
- Adjust the angle of the baby device by turning the camera up, down, left or right until a satisfactory image is obtained on the parent unit device.
3.2 Intercom Mode
Speak into the camera, the speaker on the display should be able to hear the
voice, if not, you can press to increase the volume (see the 4.2 volume
adjustment in the manual for details)
3.3 Night Vision
Mode The camera is equipped with 8 high-intensity infrared LED lights that
capture clear images in the dark. When the built-in optical sensor detects
that the ambient light is weak, the infrared LED will automatically light up,
the screen of the parents unit will be shown in black and white color, and the
icon will be displayed in the status bar at the top of the screen.
PARENTS UNIT MENU
4.1 Camera Direction Adjustment
Please long press or remote the camera until you can see your little baby
4.2 Intercom Mode
When the parent’s unit display needs to enter the intercom mode, you need to
press key and hold the key, then you can start the conversation. Release the
key when the speech is finished. After released key of the display, the system
will automatically enter the camera intercom mode
4.3 Volume Adjustment
Press the () button, it will pop up in the menu bar, Press the button in the
display mode to increase or reduce the camera’s transmission volume. The
volume has 6 levels, and you can select the appropriate volume from the volume
level of 1 — 6.
4.4 Display Brightness Adjustment
Press Button, it will pop up the menu bar, Press the and hold the button in
the display mode to pop up the brightness adjustment progress bar, then press
the button to select the appropriate screen brightness, wait for 3 seconds,
the system will automatically save the settings.
4.5 Feeding Reminder (Alarm Clock)
- Press the button, it will pop up in the menu bar.
- Press the button until am highlighted, and click OK to confirm.
- Press the button to select the alarm time for the feeding reminder (0.5h, 1h, 2h, 3h, 4h). To return to the previous step, press the on key .
If the alarm time is selected, the parent unit will beep every 0.5 hours, 1 hour, 2 hours, 3 hours, and 4 hours and the flashing flag of the feeding reminder will be displayed.
4.6 Lullaby
- Press in button, it will pop up in the menu bar.
- Press the button until: is highlighted, and click OK to confirm.
- In the pop-up menu bar, press the button to select the lullaby you want in the 8 lullabies, Click OK to confirm.
To play all the music in a loop, select the Cii icon and press the OK key to
confirm. Press the key to return to the previous step.
4.7 System Time Setting
- Press the button, it will pop up in the menu bar.
- Press the button until is highlighted, and click OK to confirm.
- Press the button in the pop-up menu to adjust the clock, minute, second, AM/PM. Press the OK button when you complete the time setting and go to the next step. Press the button to return to the previous step.
4.8 Temperature Display
- Press the button, and it will pop up in the menu bar.
- Press the button until is highlighted, and click OK to confirm.
- In the pop-up menu bar, press the A button or V button to select°C oF as the temperature unit and press the OK key to confirm.
To return to the previous step, press the key. The screen status bar will
display the temperature, reading from the temperature sensor on the back of
the camera. If the temperature is above 30 C or below 20C , the temperature
reading will turn red. and make a beep alarm.
4.9 Camera Display Selection
- Press C’ button, and it will pop up in the menu bar.
- Press the button, to select 1 camera, 2 cameras, or switches, and press the OK button to confirm the viewing.
- The display can be switched to view different lenses at the same time, you can switch the lenses between 1 and 2 in modes.
4.10 VOX Setting
VOX detection:
Turn on the VOX mode, after 30 seconds, the screen will turn off. When the
ambient volume of the baby is louder than the set value, the display will
light up the display.
- Press the button, and it will pop up in the menu bar.
- Press the button until VOX is highlighted, and click OK to confirm.
- Select LOW/ MED/ HIGH modes to turn on VOX, or select OFF to turn off VOX.
- In the VOX off mode, short press the buttons, you can quickly enter the VOX mode (The quick access VOX mode will only turn off the display, but will retain the camera’s music transmission)
Note: When the VOX is turned off, press the power button and the display screen will turn off. You can hear the sound from the camera at any time. This mode is suitable for the baby to play with when the adult needs to leave for a while. When the VOX mode is turned on, the screen and sound will turn off after 30 seconds. When the ambient sound of the camera is louder than the set value, the display screen will light up and the speaker will make a sound. This mode is suitable for use at night.
4.11 Reset
Use a small pin to reset
CLEANING
Clean the device with a slightly damp cloth or an anti-static wipe. Never use
detergents or abrasive solvents.
Cleaning and maintenance
- Do not use thinner, other solvents or chemicals to clean any part of the product, which will result in damage to the product. This damage is not covered by the warranty.
- Do not expose the product to high temperatures, humidity, or strong sunlight, and do not get it wet.
FQA AND TROUBLESHOOTING
-
Q: Why is the distance in the room not far enough?
A: a. Check if the receiving antenna of the parent unit terminal is turned on;
b. Due to different wall materials of different houses, the blocking of 2.4G signals is different. When the signal is not satisfied, the position can be adjusted. -
Q: Why there is always some noise in the background?
A: It is impossible to eliminate all the noise. This kind of howling has always been a problem in the audio field. Please keep your receiver and camera separate in 1 meter away or more. Tip: The microphone of the receiver and camera cannot be too close. That is the reason why some users get confused when they operate the devices and always get noise in the background. This phenomenon is an uncontrollable factor. -
CI: Why is the temperature, not precision showing on the screen?
A: a. There is a difference in indoor air circulation.
b. The temperature sensor was just placed in a new environment, and there will be a deviation within two hours.
SPECIFICATIONS
Technical Parameter
Model| ABM200
Camera| 1280x720P| Display| 4.5-Inch IPS
Camera Lens| 1/6CMOS| Display
Resolution| VGA 800×480 15 FPS
View Angle| 75 Degree| Transmission Method| 2.46Hz MSS
Display Battery Capacity| 2300 mAh| Transmission Distance| 300M(: span Space)
Display Power Dissipation| 1.6W| Lullabies| Support(8 Lullabies)
CAM Power Dissipation| 1.5W| Crying Alarm| Support
Operating Temperature| -20*C — WC
Temperature| Alarm
Material| PC ABS| Feeding Alain
Display N.W| 126.0g| Night Vision(automatic)
Camera kW| 227.0g
Camera Dimensions| 86.0×107.0mm (HxD)| Display Dimensions|
130.3×79.6×16.4mm(LAWxT)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>