hama 201519 Universal Smartphone Holder Instruction Manual

June 6, 2024
Hama

hama 201519 Universal Smartphone Holder

hama-201519-Universal-Smartphone-Holder-

Thank you for choosing Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

  •  Universal smartphone bracket
  •  these operating instructions

Safety instructions

  • Use the product only for the intended purpose.
  • Protect the product from dirt, moisture and overheating and use it in dry environments only.
  • When using this product, observe the applicable local traffic laws and regulations.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.
  • Do not modify the product in any way.Doing so voids the warranty.

Warning

  • Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility arenot blocked or restricted.
  • While driving acar or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.

Installation

Grating holder

Note

  • Before installing the bracket, check the installation options in your vehicle. If in doubt, check the vehicle’s instruction manual or contact the vehicle manufacturer.
  • Check the load-bearing capacity of the slats before inserting a device into the bracket. This installation version is only recommended for devices weighing <300 g.
  • Never apply force when using the product or during installation.
  • Slide the grating clamp carefully onto the open slats of the grating until it engages.
  • To remove it, carefully pull the holder out of the grating.

Inserting /removing devices

Note
Always remove your device from the bracket before you attach it to or remove it from the ventilation slats.

  • If necessary,fold out the holder’s feet before inserting the device (1).
  • Press the buttons (2)on both sides to open the holding jaws. (3)
  • Insert the device and fixitinplace by gently pressing the holding jaws together.

Warranty disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service & Support

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals