hama 201514 Universal Smartphone Holder Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 201514 Universal Smartphone Holder
Operating Instructions
Thank you for choosing aHama product. Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package contents
- 1x Universal Smartphone Bike Holder
- these operating instructions
Safety instructions
- Use the product only for the intended purpose.
- Protect the product from dirt, moisture and over-heating and use it in dry environments only.
- When using this product, observe the applicable local traffic laws and regulations.
- Do not drop the product and do not expose it to any major shocks.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
Warning -risk of injury
- While driving acar or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
- The product is not intended for mounting on carbon components (e.g. handlebars). Carbon components can be damaged by the clamp, break, and subsequently cause serious accidents and injuries.
Installation
Note
- Never apply force when using the product or during installation.
- Please note that smartphones and similar devices are attached without securing with the silicone mesh at the user’s own risk. Only by securing them with the silicone mesh is asecuregrip of the smartphone and similar devices guaranteed
Mounting the clamp
- Turn the set screw to secureclockwise until the clamp sits securely on the handlebars without sliding around. (A)
Inserting /removing the smartphone
-
Press the unlock button on the smartphone holder to open the holding jaws (B).
-
Insert the device and fixitinplace by pressing the holding jaws together (C).
- Hang the elastic silicone mesh over all four corners of the smartphone to secureyour device in place (D).
Note
Always check that the smartphone holder is secure.
Warranty disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.