hama 201509 Universal Smartphone Holder Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 201509 Universal Smartphone Holder
**Instruction Manual**
Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package contents
- Universal smartphone bracket
- these operating instructions
3. Safety instructions
- Use the product only for the intended purpose.
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- When using this product, observe the applicable local traffic laws and regulations.
- Do not drop the product and do not expose it to any major shocks.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
4. Installation
4.1 Grating holder
Warning
- Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
- While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
Note
- Before installing the bracket, check the installation options in your vehicle. If in doubt, check the vehicle’s instruction manual or contact the vehicle manufacturer.
- Check the load-bearing capacity of the slats before inserting a device into the bracket. This installation version is only recommended for devices < 300 g.
- Never apply force when using the product or during installation
- Hold the open button ( A ) on the grating clamp down.
- Push the open clamp carefully onto the ventilation slats and release the open button.
- To remove, press and hold the open button and pull the holder carefully out of the grating.
4.2 Inserting / removing devices
- Push the slider on the right and left sides of the smartphone holder into the housing until they engage with an audible and tangible click. This extends the holding jaws ( B/C ).
- Insert your device and press it on gently ( D ). The holding jaws close automatically ( E ).
Note
Continually check that the smartphone holder is securely seated and the device is securely held.
- To remove the device, push the slider on the right and left sides of the smartphone holder into the housing until they engage with an audible and tangible click. Hold your device firmly as you do so.
- The holding jaws open automatically and release the device.
5. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
6. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.
Hama GmbH & Co KG
86652 Monheim/ Germany
Service & Support
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.