WEIJIEXUN W01 Magnetic Wireless Charger User Manual
- June 6, 2024
- WEIJIEXUN
Table of Contents
Instruction Manual
0755-23774782
Product Introduction
Separate patent design, the perfect solution to charging temperature rise and hot, eliminate the risk of the burning machine, bipolar magnet scheme, automatic correction of adsorption charging, maximum adsorption force of 400g, ultra-thin thickness, ultra-lightweight, easy to hang charging, realize multiple patent protection of mobile phone Al interaction, in line with CE FCC certification.
Product Description
W01
- Type-C/USB
Product Specifications
INPUT | 5V2A 9V2A 12V1.5A |
---|---|
OUTPUT | 5V1.1A 9V1.1A 9V1.67A 12V1.25A |
OUTPUT POWER | 15W |
PD PROTOCOL | |
PRODUCT SIZE | 62mm X4mm |
ALL the above data are measured by vjx Laboratory.
But because of the change in the objective environment. The data will be
different or biased.
How To Use It
Power Up The Charging Board
As shown in the figure, connect the charging board with the power supply
equipment with the type C charging line, The charging board is powered on
normally, and the charging indicator is: white light flashing.
Charge Your Phone
As shown in the figure, place the mobile phone in the wireless induction
charging area of the charging board for charging.
Charging is normal, the charging indicator light is: white light is always on.
Working state: the product is powered on normally, the indicator light shows:
the white light is flashing.
Working state: charge the mobile phone normally, and the indicator shows that
the white light is always on.
Matters Needing Attention
- Do not knock, throw or disassemble the product at will. It will be damaged in a rough way. Please do not press heavy objects on the product to avoid the internal circuit board structure. Avoid product damage.
- Do not use this product in high temperatures, humidity, and strong magnetic field environment.
- Do not use strong chemicals, detergents, or strong detergents to clean this product.
- Please keep this product out of the reach of children.
- In order to protect the ecological environment, please dispose of this product according to the local laws and regulations, not as domestic waste.
Safety Warning
- The use of an unauthorized or incompatible power adapter may cause fire, explosion, or other hazards.
- Do not expose this product to a high-temperature environment or heating equipment, such as sunlight exposure, heater, microwave oven, oven, and other high-temperature environment.
- Please do not drop, squeeze, puncture, short circuit the product, or put it into water or fire to avoid fire hazards.
- Please do not use this product in thunderstorm weather to avoid product failure or electric shock hazards.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.