SG Wireless SGW6008 BLE-WiFi Gateway User Manual

: June 6, 2024
: SG Wireless

Table of Contents

Introduction
SGW6008 BLE-WiFi Gateway
- Specifications
Provisioning Procedures
Edge Device Provisioning
Certification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SG Wireless SGW6008 BLE-WiFi Gateway User Manual

Introduction

The robust SGW6008 BLE-WiFi Gateway enables Bluetooth Low Energy (BLE) to WiFi connectivity without using an external smartphone or app. It collects data from BLE edge devices and sends the data over WiFi to the local server or remote cloud server using HTTPS and MQTTS protocols with TLS1.2 standard ( Figure 1 , with the edge device depicted by the SGW8130 BLE Sensor Tags).
Instructions

As the connected solution for the SGW111X BLE Module and SGW8130 BLE Sensor Tag, the SGW6008 Gateway enables real-time remote monitoring or asset tracking for IoT applications, hassle-free.

IoT applications include but are not limited to:

Industrial Smart lighting
Smart logistics and transportation
Smart devices for connected homes
Smart city infrastructure

This user manual details the SGW6008 Gateway’s provisioning process for access to the SGW IoT Platform(server), involving three procedures:

AP Mode configuration
WiFi network configuration for SGW IoT Platform
Gateway provisioning

This manual also describes the provisioning process of connecting the SGW6008 Gateway to an edge device.

SGW6008 BLE-WiFi Gateway

Exterior (Figure 2)

Micro-USB power input (5.0V DC, 1A)
AP mode button for network configuration with WiFi and Gateway provisioning
3 LED status indicators (Table 1)

| Power LED| BT LED| WiFi LED
---|---|---|---
Regular Operation
Power On| On| Off| Off
BT Signal Transmission| On| Flashing| Off
WiFi Signal Transmission| On| Off| Flashing
AP Mode Operation
AP Mode, Not Connected| Flashing| Off| Flashing
AP Mode, Connected| Flashing| Off| On
WiFi Configuration Success| On| Off| Flashing

Table 1: SGW6008 LED Status Indicators

Specifications

Absolute Maximum Rating

Power Supply| 5.5V DC
Storage Temperature| -20°C to 80°C

Recommended Operating Conditions

Power Supply| 5.0V DC
Operating Temperature| -10°C to 60°C

General

BLE RF Performance

WiFi Performance

Provisioning Procedures

The following tools are required for the provisioning process:

Micro-USB cable and power source
PC or mobile device
Stable WiFi network
SGW6008 BLE-WiFi Gateway

AP Mode Configuration

Put the SGW6008 Gateway in AP Mode by connecting it to the power source with the micro-USB cable.
Use the PC or mobile device to connect to the Gateway’s WiFi network:
Network Name: (available after Gateway purchase)
Password: (available after Gateway purchase)
After joining the network, use a web browser to access the SGW Gateway Configuration Platform at http://192.168.4.1 (Figure 1).

WiFi Network Configuration for SGW IoT Platform

There are two ways to configure the WiFi network for the Gateway:

Input your preferred WiFi network manually (Figure 2). Enter the network name and password (if applicable), and click ‘Save WiFi Setting’ when done.

Figure 2: Static IP and High Priority Slot
Scan for available WiFi networks. Click ‘Scan’ for a list of available networks and enter the password (if applicable) for your selected network. Click the ‘+’ symbol and click ‘OK’ to verify and confirm the network in the pop-up windows (Figure 3).

Figure 3: WiFi Connection

Note: The Gateway is designed to support 2.4GHz-capable WiFi networks due to the low data rate requirements for M2M. Up to a maximum of 32 characters in the WiFi password can be supported (excluding special characters +, “ and \).

Note: If needed, WiFi settings can be further configured once the network has been added to the WiFi list. Be sure to click ‘Save WiFi Setting’ when done.

If static IP is preferred, select ‘No’ for DHCP and enter the network’s IP address, Subnet Mask and DNS.
Use High Priority Slot to set the connection priority of saved networks.
Remove WiFi networks from the list by deleting the network information.

Gateway Provisioning

The Gateway has to be linked to a SGW IoT Platform account for data access.

Enter your SGW IoT Platform username (email address) and password, and label your Gateway with a name, location and description (Figure 4).

Figure 4: Gateway Provisioning
Click ‘Start Provisioning’, then click ‘OK’ to confirm Gateway provisioning in the pop-up window. The Gateway will self-reboot, and your PC or mobile device will reconnect to its original internet network. You will be directed to the SGW IoT Platform when provisioning is complete.
Login to the Platform with your username (email address) and password, and click ‘Gateways’ in the navigation bar on the left. The provisioned Gateway will appear in blue (Figure 5).

Figure 5: Provisioned Gateways

Note: Should the LEDs remain in AP mode operation after rebooting, please disconnect the Gateway from its power source completely and redo the provisioning procedures.

Note: Should you wish to configure a different WiFi network for the Gateway after provisioning is complete, first disconnect the Gateway from its power source, then put the Gateway back in AP Mode by holding down the AP Mode button while reconnecting it to power. Redo the procedures in section 3a ‘AP Mode Configuration’.

Edge Device Provisioning

The edge device needs to undergo a provisioning process to connect to the SGW6008 Gateway.

If you are not already logged in, use a browser to access the SGW IoT Platform at https://www.sg-iot.com. Login with your username (email address) and password.
Click ‘Gateway’ to show all provisioned Gateways (Figure 5). Select the Gateway to which you intend to connect the edge device.
Ensure that the edge device is turned on, then click ‘SEARCH NEW BLE’ to scan for all nearby edge devices. Discovered devices will appear as green icons with their network names matching the labels on the device (Figure 6).

Figure 6: Edge Device Connection
Click the device to which you intend to connect the Gateway and label it with a name, location and description.
Click ‘SUBMIT’ to connect the device. It will now appear in the list of connected BLE Devices.
The edge device will start collecting data. Click the device to access the data.

Certification

CE Statement

Regulatory Conformance (RED)

Hereby, (SG Wireless Limited) declares that the radio equipment type (SGW6008) is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following website: https://www.sgwireless.com.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Statement

This device complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

RF Exposure Information and Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Revision History

Revised

| Version|

Description

---|---|---
9-Mar-2020| 1.0| Initial document release
27-Mar-2020| 1.1| Provisioning section update, formatting update
24-Sep-2020| 1.2| Provisioning section update

Contact us at cs@sgwireless.com for any queries, or find us at any channel below:
Website: https://sgwireless.com/
LinkedIn: https://www.linkedin.com/company/sgwireless/
Twitter: @sgwirelessIoT
Facebook: https://www.facebook.com/sgwirelessIoT

Information in this document is provided solely to enable authorized users or licensees of SG Wireless products. Do not make printed or electronic copies of this document, or parts of it, without written authority from SG Wireless.

SG Wireless reserves the right to make changes to products and information herein without further notice. SG Wireless makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SG Wireless assume any liability arising out of the application of any product and specifically disclaims any and all liability, including without limitation consequential or incidental damages. SG Wireless does not convey any license under its patent rights nor the rights of others. SG Wireless products may not be used in life critical equipment, systems or applications where failure of such equipment, system or application would cause bodily injury or death. SG Wireless sells products pursuant to standard Terms and Conditions of Sale which may be found at https://www.sgwireless.com/page/terms.

SG Wireless may refer to other SG Wireless documents or third-party products in this document and users are requested to contact SG Wireless or those third parties for appropriate documentation.

SG Wireless™ and the SG and SG Wireless logos are trademarks and service marks of SG Wireless Limited. All other product or service names are the property of their respective owners.

Logo