LITLIT ET3 HolyHigh Noise Canceling Wireless Earbuds User Guide
- June 6, 2024
- LITLIT
Table of Contents
LIT LIT ET3 HolyHigh Noise Canceling Wireless Earbuds
User Guide
Package Accessories
2 HolyHigh Earbuds
1 Charging Case
1 Type-C Charging Cable
1 User Manual
4 * Pairs of Ear Tips
Product Introduction
- Multifunctional Touch Button
- LED Indicator of Earbud
- Charging Pins on Earbud
- LED Indicator of Charging Case
- Type-C Charging Port
- Charging Pins on Charging Case
Usage Instructions
-
After you open the package for the first time use, please tear off the insulation film on the earbuds, then charge the earbuds and charging case via a USB charging cable for at least 10 minutes; do not take out the earbuds during this period.
-
The earbuds are installed with a pair of medium-sized ear tips by default. Please select a suitable size for a secure fit.
-
How to pair
a) Binaural mode instructions:
Open the charging case or press and hold the Multifunctional Touch Buttons (MFB) for 2 seconds in the power-off state to turn the earbuds on, the left and right earbuds will enter TWS pairing mode automatically. After the pairing is successful, the indicator of the main earbud will flash red and white light alternately and the indicator of the secondary earbud will flash white light once every 3 seconds and a voice prompt “Pairing” will follow from the main earbud. At this time, turn on the Bluetooth function of your phone, search “HolyHigh ET3” and click to pair. After the pairing is successful, the earbuds will prompt you with “Connected”, and the indicators of the earbuds will go out.
b) Mono mode instructions:
Press and hold the MFB on a single earbud for 2 seconds in the power-off state to turn it on or open the charging case, take out a single earbud and close the charging case. Double click the MFB on the single earbud, the earbud will enter pairing mode, and a voice prompt “Pairing” will follow and the indicator of the earbud will flash red and white light alternately. At this time, turn on the Bluetooth function of your phone, search “HolyHigh ET3” and click to pair. After the pairing is successful, the earbud will prompt you with “Connected”.
Note: If you are using one earbud in mono mode but you need to switch to binaural mode, and the charging case still has battery power, please open the charging case and take out the other earbud for use.
c) Left earbud connected to device A and right earbud connected to devise B instructions:
Turn a single earbud off when using it in binaural mode. Press and hold the MFB on the single earbud for 5 seconds in a power-off state, and release the MFB when the indicator of the earbud flashes red and white light alternately. At this time, search “HolyHigh ET3” on the Bluetooth list of device B and click to pair. Note: If you want to restore to binaural mode from mono mode, please refer to No. 4 How to reset. -
How to reset
- Delete the pairing name “HolyHigh ET3” on your mobile phone and turn off the Bluetooth function.
- Turn off the earbuds, then press and hold the MFBs on the left and right earbuds for 5 seconds to enter pairing mode, and release the MFBs when the indicators of the earbuds rapidly flash red and white light alternately. At this time, please quickly triple-click the MFBs on the earbuds, the indicators of the earbuds will rapidly flash red and white light twice then go out, and a prompt tone “Di” will follow.
- Put the earbuds back into the charging case and close the charging case.
- Take out the earbuds from the charging case and they enter pairing mode. That means the earbuds have been reset successfully.
- If the reset fails, please repeat the above steps.
- How to control****
Turn on| Open the charging case when it still has battery power/press and hold the MFB for 2s in a power-off state
---|---
Turn if| Put the earbuds back into the charging case and close the charging case when it still has battery power/press and hold the MFB for 5s in a non- playing state
Note: When one earbud is turned off, the other earbud is not turned off at the same time.
Play| Double click the MFB on the L/R earbud
Pause| Double click the MFB on the L/R earbud
Previous song| Press and hold the MFB on L earbud for 2s (with a prompt tone)
Note: In mono mode, press and hold the MFB on L earbud for 2s and will skip to the next song.
Next song| Press and hold the MFB on R earbud for 2s (with a prompt tone)
Volume down (in calling state)| Press and hold the MFB on the L earbud for 2s (Volume can be turned down continuously if you keep the MFB pressed)
Note: In mono mode, this function is unavailable.
Volume down (in the music-playing state)| Click the MFB on the L earbud to decrease the volume by one level.
Note: Do not click too fast, otherwise the music may be paused due to misoperation. This function is unavailable in mono mode.
Volume up (in calling state)| Press and hold the MFB on R earbud for 2s (Volume can be turned up continuously if you keep the MFB pressed)
Note: In mono mode, this function is unavailable.
Volume up (in the music-playing state)| Click the MFB on R earbud to increase the volume by one level.
Note: Do not click too fast, otherwise the music may be paused due to misoperation. This function is unavailable in mono mode.
Answer a call| Double click the MFB on the L/R earbud
Hang up a call| Double click the MFB on the L/R earbud
Reject a call| Press and hold the MFB on the L/R earbud for 2s
Activate voice assistant| Click the MFB on the L/R earbud 3 times - Product parameters****
Version| 5.0
---|---
Support protocol| HFP, HSP, A2DP, AVRCP
Working distance| 10M (barrier-free)
Working time of earbuds| Up to 6.5 hours (Varies by volume level and audio contents)
Total working time (earbuds+charging case)| Up to 25 hours (Varies by volume level and audio contents)
Single earbud/charging case battery capacity| 60mAh/420mAh
Charging times| Up to 3 times
The input current of charging case| 5V/1A
Charging time of earbuds| 1.5 hours
Charging time of charging case| 2 hours - LED indicator****
Status| Description| Voice prompt
---|---|---
Turn on| White light rapidly flashes for about 2s| “Power on”
Turn off| Red light rapidly flashes for about 2s| “Power off”
Pairing| The main earbud flashes red and white light alternately and the secondary earbud flashes white light once every 3s| “Pairing”
Successful connection| Indicators of both earbuds go out| “Connected”
Earbuds are being charged| Red breathing light| /
Earbuds are fully charged| The red light goes out| /
Earbuds in low battery power| Red light flashes once every 3s| /
The charging case is being charged| White breathing light| /
The charging case is fully charged| White light goes out| /
When earbuds are being charged by the charging case, the indicator of the charging case| Flashing white light| /
When earbuds are fully charged by the charging case, the indicator of the charging case| White light goes out| /
Charging case in low battery power| White light rapidly flashes for 5s then goes out| /
FAQ
-
The charging case still has battery power, but why are the earbuds can not be charged?
A. For the first time use, please confirm whether the insulation film of the earbuds is removed or not.
B. Wipe the pins (golden part) of the earbuds and the charging case with a clean cotton cloth to ensure that there are no foreign objects.
(If there is sweat or liquid on the charging pins of the charging case and the earbuds, it may cause corrosion to the earbuds. Please clean as necessary and then put the earbuds back into the charging case.) -
Why is there jamming when using the earbuds? Due to the characteristics of Bluetooth earbuds, the electromagnetic wave interference in the area may cause temporary jamming.
AFTER-SALE SERVICE
Our customer service is friendly and hassle-free, please contact us if you
need our help as follows:
-Technical Support
-Package is Not in Perfect Condition.
-Orders beyond the deadline of the Amazon Return Window are also accepted.
Email:support@yogotec.com
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
FCC Statement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
|
---|---
http://qr31.cn/ElrUWY| http://qr31.cn/FJs5xh
Prolinx GmbH Brehmstr. 56, 40239, Duesseldorf, Germany
Shenzhen Yuangu TechnologyCo., Ltd. No.101, 1st Factory Building, Hebei
Industrial Park, Ma’antang Community, Hebeizhongxing Road, Bantian Sub-
district, Longgang District, Shenzhen, China
E-mail: support@yogotec.com
211-201113
FCC ID: 2ATWG-YGATO1
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>