neptune NEKPWST2W Keypad Touch EM/HID/MF S/Alone Or Wiegand IP65 User Guide
- June 6, 2024
- Neptune
Table of Contents
neptune NEKPWST2W Keypad Touch EM/HID/MF S/Alone Or Wiegand IP65
MODELS
NEKPWST2W NEPTUNE KEYPAD TOUCH EM/HID/MF S/ALONE or WIEGAND IP65 (3×4)
PROGRAMMING
Colour Indicators refer to LED status lights on Keypad
MASTER CODE MUST BE BETWEEN 6-8 DIGITS. PRESS * TO EXIT THE PROGRAMMING .
PIN NUMBERS MUST BE BETWEEN 4-6 DIGITS PRESS * TO EXIT PROGRAMMING.
THE ABOVE METHOD IS PREFERRED FOR CARD PROGRAMMING SO INSTALLERS CAN NOTE WHICH USER NUMBER EACH CARD IS ASSIGNED TO. PRESS * TO EXIT THE PROGRAMMING .
THIS METHOD DOES NOT REQUIRE PROGRAMMING MODE METHOD IS IDENTICAL FOR DELETING USERS WITH MANAGER CARD.
PIN NUMBERS MUST BE BETWEEN 4-6 DIGITS PRESS * TO EXIT PROGRAMMING.
THSI METHOD REQUIRES EXISTING CARD TO BE PRESENT PRESS * TO EXIT PROGRAMMING .
PRESS * TO EXIT PROGRAMMING.
PROGRAMMING (Advanced)
WIEGAND: FOR CONNECTION TO EXTERNAL ACCESS CONTROL SYSTEM PRESS ** TO EXIT PROGRAMMING.
APPLICABLE WHEN IN WIEGAND MODE PRESS ** TO EXIT PROGRAMMING.
APPLICABLE WHEN IN WIEGAND MODE PRESS ** TO EXIT PROGRAMMING.
THIS IS IN REFERENCE TO THE LED LIGHT ABOVE THE KEYPAD PRESS ** TO EXIT PROGRAMMING.
KEYPAD BUZZER WILL STILL OCCUR DURING PROGRAMMING MODE PRESS TO EXIT PROGRAMMING.PRESS TO EXIT PROGRAMMING.
USER OPERATION
STANDALONE WIRING EXAMPLES
Power to Open (Normally Open)
Power to Lock (Normally Closed)
WIEGAND WIRING EXAMPLE
For connection to Access Control Panel (must be set to Wiegand mode )
Documents / Resources
|
neptune NEKPWST2W Keypad Touch EM/HID/MF S/Alone Or Wiegand
IP65
[pdf] User Guide
NEKPWST2W, Keypad Touch EM HID MF S Alone Or Wiegand IP65, NEKPWST2W Keypad
Touch EM HID MF S Alone Or Wiegand IP65
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>