NEPTUNE PPLV30-12 Transformer Power Supply Instructions
- June 9, 2024
- Neptune
Table of Contents
NEPTUNE PPLV30-12 Transformer Power Supply
Introduction
The Neptune Pool Light Transformer is designed to supply 12VAC for our Neptune LED Pool Lights and other suitable pool lights.
SPECIFICATIONS
MODEL NUMBER| PROTECTION RATING| INPUT| OUTPUT| AUXILIARY OUTPUT| SECONDARY
FUSE
---|---|---|---|---|---
PPLV30-12| IP44| 230V-240VAC 50Hz| 1 x 12VAC 30VA| 230V-240V 10A| 1 x 4A
PPLV60-12| IP44| 230V-240VAC 50Hz| 2 x 12VAC 30VA (60VA)| 230V-240V 10A|
2 x 4A
PPLV90-12| IP44| 230V-240VAC 50Hz| 3 x 12VAC 30VA (90VA)| 230V-240V 10A|
3 x 4A
PPLV120-12| IP44| 230V-240VAC 50Hz| 4 x 12VAC 30VA (120VA)| 230V-240V
10A| 4 x 4A
SAFETY INSTRUCTIONS
- The Neptune Pool Light Transformer must be installed and serviced by a qualified electrician in accordance with AS/NZS 3000:2007.
- Failure to install correctly may result in property damage, serious injury or death.
- Do not overload output.
- Do not connect more than 5 x Neptune Pool Light Transformers in a series (Daisy Chain).
INSTALLATION
-
The Neptune Pool Light Transformer must be installed in an upright position undercover at least 500mm above ground, see Figure 1.
-
Drill mounting screw holes 93mm apart. Mount unit using wall plugs and screws provided, see Figure 2.
-
Connect cable to output screw terminals, see Figure 3.
-
Ensure cable is correctly connected to Neptune LED Pool Light.
-
Plug unit into mains 240V socket.
-
Turn on 240V power and enjoy your Neptune LED Pool Lights!
Customer Service
Simply A Better Choke
Phone Free Call: 1800 143 788
Email: [email protected]
International Phone: + 61 7 3209 7884
Web: www.poolpro.com.au
