BroadMobi R705 LTE Cat4 Mobile Wi-Fi Router User Manual

BroadMobi R705 LTE Cat4 Mobile Wi-Fi Router

Interface

Administrator password or Wireless network key, you can press the Reset key to restore factory default settings.

LED Indication

Indicator| Color| Working Status|
---|---|---|---
 | Green| Solid:booting up the device|
Power LED| Amber| Blink:Charging| Blink: Turn on-0.5s Turn off-0.5s
Blue| Solid:Battery High(100%-60%) or Charge Completed
Amber| Solid:Battery Middle(60%-15%)
 | Red| Solid: Battery too low nearly shutdown(〈15%)
SMS LED| Blue| Blink:NewSMS

Signal LED

| Blue| Solid: Regiester to LTE (not connect)

Blink: Connected to LTE network

Green| Solid: Regiester to 3G (not connect)

Blink: Connected to 3G network

 | Purple| Solid: Regiester to 2G (not connect)
 |  | Blink: Connected to 2G network|
---|---|---|---
Red| Solid:No Service/Device Error

WiFi LED

| Blue| Solid:No Client

Blink: Client is actived

Blink: WPS is actived| Blink: Turn on-0.2s Turn

off-0.1s

Installation

Follow the diagram to install the SIM card and SD card

Tips: Always switch the device off and disconnect the charger before removing the battery.

1. Remove the back cover and battery;
2. Insert the SIM card and SD card. Ensure that the contact area on the card is facing down and that the beveled corner on the card is facing the beveled corner on the holder.
3. Align the battery contacts with the battery compartment connectors, and insert the battery. Replace the back cover lastly.

Charge

Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:

1. Connect the charger to an outlet.
2. Connect the USB charger plug to your device’s USB port.
3. When the device indicates a full charge, disconnect the charger from the device, then from the outlet.

One Using charge adapter

Two Using USB port

BMC R708A Usage
R708A support 4G/3G networks. Insert the SIM card, Wi-Fi devices and the computer can access the Internet through R708A, enjoy high-speed network services.Smart phones, tablet computers, game consoles and other Wi-Fi devices can be connected with the R708A Wi-Fi connection for Internet access. Computers & laptops etc. may be connected to the R708A via USB cable for Internet Access.
R708A connects computer for the first time via a USB connection, you need to follow the prompts to install the driver

Wi-Fi wireless Internet access

In order for a WiFi device to establish a connection with the R708A for the first time, you will need to select the R708A SSID (WiFi name) & enter the relevant WiFi password, which you may find in the following ways: Method one: on the nameplate view the default SSID and Wi-Fi passwords

Method Two: Login management page view

1. Computer, open your browser, input http://192.168.0.1 and enter.
2. The default Account is admin
3. The default Password is admin
4. Enter the Wi-Fi menu, view the default SSID and Wi-Fi password
5. The default SSID is R708A
6. The default Wi-Fi Password is 87654321

Recommend that you start using R708A administration pages after setting a convenient landing memorizing SSID and a higher safety factor Wi-Fi passwords

Install the driver and connecting the device

USB Connection:Windows 7 for example

1. 1. Keep R708A powering on,Plug the device into your computer,it will shows like the following pictures step by step.
2. Double-click the , wait for the installation to complete
3. Check the network card is installed correctly,like the following pictures

OR

Establish Wi-Fi connection:you must ensure that the computer equipped with a wireless network card. If the computer showed the presence of Wi-Fi connectivity, the wireless LAN is available. Otherwise, you need to check your wireless network card is working properly.

1. In the Wi-Fi list, select the SSID consistent with R708A Wi-Fi, click Connect
2. Enter the correct Wi-Fi password, click OK
3. Wait a moment, Wi-Fi connection is displayed next to the name, Wi-Fi connection is successful

Home

First part of the main display settings and network status information, such as IPaddress, SIM card status, type and quality of the network signal, whether it is roaming, with or without a new message, and traffic statistics,and system uptime,and so on.

Wizard

You can quickly change the LAN configuration, set the APN , and change the SSID \ password through the wizard function.

Connection

Dialing Mode:
Select the Auto Mode, after you turn on R708A without additional operations, the device will automatically connect to the network; select the Manual Mode, you need to manually connect to the network after opening the R708A management page.

APN Setting: You can customize the network configuration or manually add the new APN and set default APN.

3.4G/3G Modem

There are four types of networks can be choose: Auto is 4G/3G, LTE Only is using only 4G, WCDMA Only is using only 3G.

PIN

Open your PIN, if you reboot the device, you need to login management page,and the page will prompted to enter the correct PIN code, you can use the SIM card. PIN / PUK code supplied with the SIM card provided by your carrier, please consult your carrier.

PLMN

Public Land Mobile Network have two mode, one is automatic,the other is manual.You can search the current network manually and register.

LAN

We can change IP address in this page.

DHCP Mode: Select the server mode, the device can be done using a DHCP server; choose None, which is off the server function. Start / End IP address: Changing DHCP assigned IP and IP segments. Lease Time: Each is assigned a time to use the IP

LeasedHosts: the R708A each wireless device list and USB device can view the Host name, MAC Address, IP Address, information about the Remaining Time.

SMS
When using SIM card to access network, you could also send text messages at the time. You can send, receive, reply , forward, and save test messages. You can send 10 text messages at the same time,SMS number intervals with a semicolon. Also you can setting the storage location of messages, and so on. We can operating the SMS in this page.

Wi-Fi

Basic

We can setting the wifi configuration in this page, like B/G/N mode, Channel, SSID,WIFI KEY and so on.

WPS

R708A supports two kinds of WPS authentication, PBC and PIN. Default is PBC authentication.

WPS PBC authentication:

If your WiFi Enabled ,device supports WPS (WiFi Protected Setup) and you have forgotten or do not wish to enter your password to connect to your R708A, you may use the following available procedures for quick access to WiFi. Open the WPS: WPS can be opened by two methods. The fist method is , Entering the management interface page, press the “Apply“ button , open the WPS. It will lasting 120 seconds. Like the following picture.

Using WPS to connecting the R708A (Computer for example):
You can press the WPS button on the wireless card if your wireless card also supports WPS authentication. Waitting for a moment , It will be prompted to connect successfully.

Or Select the SSID of the device and connect. then you can see connecting process The second method is, Select the SSID of the device and

connect Press the WPS button on theR708A, activate the WPS. It will lasting 120 seconds. then you can see connecting process.

WPS PIN authentication:
The connection to the R708A is achieved by inputting the relevant PIN key into the enrollee PIN text box, which you may find in the wireless network card. When you applied, It will lasting 120 seconds. The premise is that the wireless network card or the clients must support WPS PIN authentication. Like the following pictures.

MAC Filter

Deny list Stations: If you add the computers or wireless devices MAC address into the list, it can prohibiting the computers or wireless devices connect to the R708A.The computes or wireless devices  MAC address which are not in the list can able to connect to R708A. Allow list Stations: Opposite with Deny list Stations. It only allows the devices in the list to connect to the R708A, other wireless devices are unable to connect to the R708A Disable: It means close the function of the MAC Address Filter.

Station List

Showthe information of wireless devices which are connected to the R708A.

Security

Firewall

Firewall configuration: You can Disable or Enable the Firewall function. Also you can setting the matching packets ipv6/ipv4 rule to receive or reject.

You can add the rule in the list and click apply confirm it.

NAT

The page allows you to upgrade the firmware. It have two mode.

Remote Server:
When you power on the device , if you insert the SIM card and register the internet .it can automatic check whether there is a new version, if there is a new version was detected, can be directly upgrade.

Manual:
You can download updates to the local computer, and then choose to download in the page of upgrade file to upgrade.

Password

Modify the login password for administrator interface. Also you can setting the time to logout the UI automatically.

Date and Time

You can synchronize the time with the host , you can also select the time zone

Language

You can change the UI language in this page.

Power saving

You can change the time of sleep mode or deep sleep mode. In this page you also can Disable the Power saving function. Sleep mode: System will enter into the sleep mode, when there is no Wi-Fi client connected to this device. Deep sleep mode: System will enter into deep sleep mode, when there is no Internet access and no Wi-Fi client connected to this device.

Reboot

Safety Warning

Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) information:
This Portable computer meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart phone has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separation distance between the user’s body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>