ARCADE1UP 79757977 Pac-Man Giant Joystick Owner’s Manual

ARCADE1UP 79757977 Pac-Man Giant Joystick

BATTERY INSTALLATION

1. Please make sure the controller is turned OFF or in Auto OFF mode.
2. Pull the locking slot on the bottom of Giant Joystick and flip the Foot Step.
3. Remove battery box cover.
4. Insert 2 AA alkaline batteries in the battery box as illustrated making certain that negative (-) and positive (+) poles are positioned properly.
5. Replace battery box cover – be sure not to over-tighten the screw.

WARNING – BATTERY-OPERATED-TOYS

BATTERY SAFETY NOTICE ****

1. Non-rechargeable batteries are not to be recharged.
2. Rechargeable batteries are to be removed from the device before being charged (if removable).
3. Rechargeable batteries are only to be charged under adult supervision.
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
6. Only batteries of the same or equivalent types, as recommended are to be used.
7. Batteries are to be inserted with the correct polarity.
8. Remove batteries before storing.
9. Exhausted batteries are to be removed from the device.
10. Always use alkaline batteries.
11. Do not dispose of batteries in fire, batteries may explode or leak.
12. The supply terminal is not to be short-circuited.

NOTE: All packaging materials should be removed by adult before giving this product to the children!

WARNING THE EPILEPSY

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure incident, it is recommended to take a 10-15 minute break at each hour of playing.

FEATURES

• 2.4 GHz wireless Giant Joystick
• Includes HDMI and USB® cables
• Up to 25 ft. (7.6m) gaming range.

SETTING UP GAME CONSOLE

1. Connect HDMI cable to TV and Game Console. (make sure the devices are OFF).
2. Connect a Micro USB cable (Included) to a USB power supply to power ON the game console.
3. Press the Power Button on top of the Game Console to power ON. The power indicator light on top of the Game Console will light up RED and then the TV will enter the game.
   NOTE: Make sure your TV is on the correct HDMI auxiliary input.

NOTE:

• On the wireless mode, Giant Joystick goes to Sleep mode after 3 minutes of inactivity (the red LED on the Giant Joystick will go OFF, Press the Left or Right Action button to wake up the Giant Joystick)
• When you switch to Wireless Connection and connected the Micro USB cable to Giant Joystick, USB Power Connection mode is a priority.
• If the battery voltage is insufficient (lower than 2.4V), the red LED on the Giant Joystick will flash slowly to prompt the battery need to be replaced.
• Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

ASSISTANCE OR SERVICE

If you have questions regarding your Arcade1Up product or require technical support, contact Arcade1Up Customer Service at www.Arcade1Up.com and click on “Support”.

CONNECTING YOUR CONTROLLER

YOU CAN CONNECT YOUR GIANT JOYSTICK TO THE GAME CONSOLE IN 2 WAYS! ( WIRELESS / USB POWER CONNECTION)

WIRELESS CONNECTION

1. Make sure the power of Giant Joystick is OFF.

2. Insert two 1.5V AA batteries into the battery compartment.

3. Turn ON the power switch on the Game Console, Giant Joystick, and TV (indicator light on Game Console & Giant Joystick will light up RED).

4. Use Giant Joystick to select a game and press the “A” button to enter the game you selected, then you can see the game controls.

5. Hold the “Player 1” button for 5 seconds to return to the main menu and hold the “Player 2” button for 5 seconds to reset the game.
   For the second Giant Joystick connection:

6. Make sure the first Giant Joystick is ON and the power of the second Giant Joystick is OFF.

7. Insert two 1.5V AA batteries into the battery compartment.

8. Hold “Player 1” and “A” buttons at the same time then turn ON the power switch of the second Giant Joystick (indicator light will light up flashing RED), then turn OFF the first Giant Joystick.

9. Once the second Giant Joystick is connected successfully, the indicator light will light up RED, then turn ON the first Giant Joystick.

USB POWER CONNECTION

1. Slide power switch to OFF position.

2. Use a Micro USB cable (not included) to connect Giant Joystick to the Game Console. If the red light on Giant Joystick is always ON, the connection is successful.

3. Use Giant Joystick to select a game and press the “A” button to enter the game you selected, then you can see the game controls.

4. Hold the “Player 1” button for 5 seconds to return to the main menu and hold the “Player 2” button for 5 seconds to reset the game.
   For the second Giant Joystick connection:

5. Make sure the second Giant Joystick has been connected successfully wirelessly.

6. Slide power switch to OFF position.

7. Use a Micro USB cable (not included) to connect the second Giant Joystick to the game console. If the red light on the second Giant Joystick is always ON, the connection is successful.

NOTE:
Turn the Giant Joystick power switch to the left if you use a wired connection. Turn to the right if you use a wireless connection.

GAME CONTROLS

1. MOVE THE JOYSTICK TO SCROLL THROUGH THE GAME LIST
2. PRESS A BUTTON TO CHOOSE GAME
3. FOLLOW THE GAME CONTROLS BELOW FOR EACH GAME
4. HOLD SELECT / PLAYER 1 (5 SECONDS) TO RETURN TO MENU AND TO SAVE A HIGH SCORE
5. HOLD START / PLAYER 2 (5 SECONDS) TO RESET GAME

VISIT US ATARCADE1UP.COM

References

• Arcade1Up | Officially Licensed Arcade Cabinets
• Arcade1Up | Officially Licensed Arcade Cabinets

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>