ARCADE1UP GLD-A-200911 Golden Tee 3D Golf 19 Inch Arcade with Lit Marque Owner’s Manual
- June 4, 2024
- ARCADE1UP
Table of Contents
1UP GLD-A-200911 Golden Tee 3D Golf 19 Inch Arcade with Lit Marque
Owner’s Manual
WARNING
To ensure the safe operation of the product, be sure to read this Owners
Manual before use. Keep this Owners Manual in a safe place for easy reference
when needed.
AGES 14+
OWNER’S MANUAL
WARNING
READ BEFORE USING THE Arcade UP
SAFETY PRECAUTIONS
The following symbols are used in labels on the game to draw attention to
potentially hazardous situations:
WARNING: Failure to avoid the risk may result in death or serious injury
Electrical Shock Hazard. Disconnect power before removing the cover. Should
only be done by a qualified technician.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
- Please read and comprehend all warnings stated in this manual.
- Do not get arcade wet when deaning.
- Parents and guardians: Please read the entire manual before allowing gamers to play.
- The AC/DC adapter and apparatus should not be exposed to dripping or splashing, and no object filled with liquids, such as vases, should be placed on the apparatus. The AC/DC adapter is used as a disconnect device. The AC/DC adapter of the apparatus should not be obstructed OR should be easily accessible during intended use. To completely disconnect the power input, the AC/DC adapter of the apparatus should be disconnected from the mains.
- If the appliance is provided with protective earth terminal, it should be connected to the main outlet with a protective earth connection.
- Minimum distances 10 cm / 3.94 inches around the apparatus for sufficient ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-does, curtains, etc.
- No naked flame sources such as lighted candles should be placed on the apparatus.
- The apparatus should only be used in moderate climates.
EPILEPSY WARNING
A very small percentage of individuals may experience epileptic seizures or
blackouts when exposed to certain light patterns or flashing lights. Exposure
to certain patterns or backgrounds on a television screen or when playing
video games may trigger epileptic seizures or blackouts in these individuals.
To reduce the risk of such a seizure incident, it is recommended to take a
10-15 minute break at each hour of playing.
FCC/ISED STATEMENT
This device complies with part 15 of the FCC rules / Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC/ISED rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
WARNING: Arcade UP assumes no liability for improper installation or excessive loads placed on screws or brackets. This wall anchor is not a substitute for proper adult supervision.
**** IMPORTANT SAFETY INSTRUCTIONS
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Use only with a riser specified by the manufacturer, or sold with the apparatus. When a riser is used, use caution when moving the riser/apparatus combination to avoid injury from tip-over.
- The equipment shall be used at a working ambient temperature of 32°- 95°F (0°- 35°C).
- TIP OVER HAZARD -This apparatus should secure in place by using the provided mounting means. Freestanding is capable of resulting in instability causing possible injury. Refer to the installation instruction for detail.
INSTALLATION
This game is designed for indoor and personal use only. It must not be installed outdoors. The following conditions must be avoided. 1. Direct exposure to sunlight, high humidity, direct water contact, dust, high heat, or extreme cold. 2. Vibration. The game must be installed on a level surface. Do not install in an area such that the game would present an obstacle in case of an emergency (i.e., near fire equipment or emergency exits).
SPECIFICATIONS
**** This product is intended for use only with the adapter provided:
Manufacturer: Blue Iron Holdings Ltd. Model: B136-120300-U2
POWER SUPPLY: AUDC Adapter INPUT POWER: AC 100-240V-50/60Hz 1.2A Max OUTPUT
POWER: DC12V= 3A 36.0W MONITOR: 19″ LCD CABINET ASSEMBLED DIMENSIONS: 66″x
22″x 21.75″ (167cm x 55.8cm x 55.2cm)
- The AUDC adapter is used as a disconnect device.
- The AUDC adapter of the apparatus should not be obstructed OR should be easily accessible during intended use.
- To completely disconnect the power input, the AC/DC adapter of the apparatus should be disconnected from the mains. “‘Adapter energy efficiency information is also available in the FAQ at WWW.ARCADE1 UP.COM
ASSISTANCE OR SERVICE
Before contacting us for assistance or service, please check the “Troubleshooting” section in the User Manual. If you still have questions regarding your Arcadel UP product or require technical support. Contact Arcade UP Customer Service at www.Arcade1UP.com and dick on “Support”.
GAMESETTINGS
- MOVE THE CURSOR TO THE GEAR ICON (NEXT TO THE GAME ICON) USING THE 1RACKBALL
- PRESS THE “START” BUTTON TO ENTER GAME SETTINGS
- MOVE THE CURSOR USING THE TRACKBALL TO ADJUST SETTINGS
- SELECT”HIDE THIS MENU” AND PRESS THE “START” BUTTON TO SAVE & EXIT
CAUTION
Servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so.
All PICTURES SHOWN ARE FOR ILIOSTRA.11011 PURPOSE OILY ACTUAL PRODUCT MAY VARY
DOE TO PRODUCT ENHANCEMENT.
GAME CONTROLS
ARCADE MAY TAKE 10-15 SECONDS TO POWER ON AFTER SWITCHING ON
- FAOVETHECURSORTOTHE GAME ICON USING THE TRACKBALL
- PRESS THE “START” BUTTON TO CHOOSE GAME
- FOLLOW THE GAME CONTROLS BELOW FOR EACH GAME
- PRESS THE “LIVE” BUTTON TO BRING UP THE PAUSE MENU
- SELECT “QUIT GAME” IN THE PAUSE MENU TO EXIT THE GAME
WARNING
TO ENJOY A SAFE GAMING ENVIRONMENT
Please use the wall anchor kit that is included with the product.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
To help prevent tip-over:
- Set up Arcade on a level floor.
- Never allow children to climb or hang on products.
- Always set up an anti-tip device! The use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
WARNING:
Arcade UP assumes no liability for improper installation or excessive loads
placed on screws or brackets. This wall anchor is not a substitute for proper
adult supervision.
Make sure to locate your Arcade UP on a flat surface
FCC RF RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and any part of your body.
ISED RF RADIATION EXPOSURE STATEMENT :
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
Came %AI not turn on. | plugged into a wall outlet -Power cord is not it. |
-Virus/Plugs are hooked up incorrectly.
-Upload switch on backofmonito r is in the Off position.| -Make site power cord Is plugged into the wall outlet and there is the power to that outlet. (Plug other electrical equipment into the power outlet to make sure the outlet normally works.)
-Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
-SI le ON/OFF Switch located on control deck to the ON position. -Slide upload switch on the back of manila to the ON position.
The game will turn ON, but there is no sound.| -Wires/Plugs were hooked up
Incorrectly. -The volume Switch is in the OFF position.| -Makes all
Wires/Plugs are properly connected and all the way set in as directed in
assembly instructions.
-Slide Volume Switch located on control dedc to the right.
NOTE Push volume slide switch right to increase volume left to lower volume.
You hear sound but there is no picture.| -Wires/Plugs were hooked up
Incorrectly.| -Make Jute all Wires/Plugs are properly connected and all the
way set in as directed in assembly instructions.
The game screen is frozen.| -The game encountered a problem when processing
the data.| -Turn the ON/OFF switch OFF and then back to 011 again.
-You may need to RESET the game. Turn the ON/OFF switch to the OFF
position. Unplug the game from the wall outlet and wait 60 seconds to RESET
the game. Plug the game back in and turn the ON/OFF switch back to ON.
Marquee will not light up.| -The marquee power cord is not plugged 0 at the
back of the monitor.
-The marquee power cord is plugged into the wrong input.| -Make sure all Wires/Plugs are properly connected and all the way set in as directed In assembly Instructions.
The game screen looks pixelated or there are lines running through the image.|
-Vreslugs was hooked up incorrectly.| -Make sure all Wires/Plugs are properly
connected and all the way set in as directed in assembly Instructions.
-You may need to RESET the game. Turn the OPUOFF switch to the OFF
position. Unplug the game from the wall outlet and wait 60 seconds to RESET
the game. Plug the game back in and turn the ON/OFF switch back to ON.
One of the buttons on the control deck is stuck in the down position.| -Debris
may have gotten between the button and the button housing.| -Take something
thin (like a business card) and place it between the
button and the button housing and slide it back and forth to loosen the
debris.
You are not able to scroll through the games on the game selection menu.| -You
may be using the wrong joystick or pressing the incorrect buttons to scroll
through the games.| -Look at the game control section in the instruction
manual to make sure you are using the correct joystick or pressing the (OMR
buttons to scroll through the game selection menu.
You are able to scroll through the games on the game selection menu, but you
can’t enter a game to begin playing.| -You may be pressing the wrong button to
enter the game.| -Look at the game control section in the instruction manual
to make sure you are pressing the correct button to enter the game.
You have entered the game, but you can’t get the game to start.| -You may be
pressing the wrong button to start the game.| -Look at the game control
section in the instruction manual to make sore you are pressing the correct
button to start the game.
You have entered the game, but you can’t exit the game to get back to the game
selection menu.| -You may be pressing the wrong button to exit the game.|
-Look at the game control section in the instruction manual to make sure you
are pressing the correct button to exit the game.
fun
The control functions that are printed on the control deck do not match the
gameplay on the screen for the game you are playing.| -You may be pressing the
wrong game control buttons for the game you are playing.| -Look at the game
control section in the instruction manual to make sure you are pressing the
correct game control buttons for that game.
-Look at the game control loading screen on the monitor to make sure you are passing the correct control buttons.
(NOTE The game tectrols that are printed on the control deck are only for the
feature cabinet game. The other games In the cabinet will utilize the same
buttons but react differently.)
The game will not let me select 2 or 3 players for the chosen game.| -The game
may only be a 1 or 2-player game.| -Refer to the game control section in the
instruction manual to see how many players are able to play that game.
COLLECT THEM ALL
02021 Konami Digital Entertainment ©Kona mi Amusement 02021 Viacom International Inc All Rights Reserved. Nickelodeon, Teenage Mutant Ninja Turtle, and all related titles, logos, and characters are trademarks of Viacom International Inc.
Killer Instinct’
Arcade (ID 1994 Microsoft. Microsoft Killer Instinct and the Killer Instinct
Logo have registered trademarks of the Microsoft group of companies.
Manufactured and sold by Tastemakers,111 under license by Microsoft.
Battletoads @1991, Battletoads Arcade 01994, Killer Instinct @ 1994, Killer
Instinct Arcade @ 1994, Killer Instinct 2 0 1995 Microsoft. Microsoft,
Battletoads, the Battletoads logo, Killer Instinct, the Killer Instinct logo,
Rare, and the Rare logo are registered trademarks of the Microsoft group of
Companies.
Visit Arcade1up.com
TO SIGN UP FOR OUR MAILING LIST AND SEE A COMPLETE LIST OF GAMES
GOLDEN TEE° GOLF, ITS°, INCREDIBLE TECHNOLOGIES°, IT°, and IT
IncredibleTECHNOLOGIES’ are the properties of Incredible Technologies, Inc.
All Rights Reserved. © Copyright 2021 Incredible Technologies, Inc.
All Rights Reserved. Unauthorized duplication is a violation of applicable
law.
All other marks are the properties of their respective owners. All Rights
Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>