Govee H6003 Wi-Fi LED Bulb User Manual
- June 5, 2024
- Govee
Table of Contents
Govee H6003 Wi-Fi LED Bulb
Safety Instructions
Read and follow all the safety instructions:
- The bulb is not waterproof. Avoid exposing it to splashing or dripping water.
- The operating temperature should be within -10° to 45° C (14° to 113° F).
- The bulb’s internal light source is unfixable. If it breaks, you must replace the entire bulb.
- Do not allow children to install the bulb alone.
- Do not install the bulb with a dimming driver.
- Avoid installing the bulb near heat sources.
- Avoid installing the bulb near potentially dangerous sources (e.g., candles, liquid-filled objects).
Introduction
With the convenience of voice control and a host of colors to enjoy, the Wi-Fi
LED Bulb is sure to light up your life.
What You Get
Item 860031 C1 860031(2
Wi-Fi LED Bulb 2 4
User Manual 1 1
Service Card 1 1
At a Glance
Installing Your Bulb
Installing Steps
- Switch off the power source used for the bulb before installing.
- Screw the bulb into the base.
Pairing Your Bulb with the Govee Home App
What You Need:
- A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
- A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
- Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
- Connect your smartphone to your home network.
- Open the app, tap”+” icon in the top right corner and search “H6003”.
- Tap the device icon and follow the on-screen instructions to complete the pairing.
Controlling the Bulb with Your Voice
- Open the Gove Home app, then tap the device icon to enter the details page.
- Tap the “setting” icon SETTING in the top right corner.
- Select “Using Guidance” and follow the on-screen instructions to begin using voice control.
Specifications
Working Voltage AC 100 – 240V
Power 9W
Lumen 8001m
Color RGBWW
Color Temperature 2700K-6S00K
Working Temperature -10° C to 45 ° C/14° F to 113 ° F
Troubleshooting
-
I cannot connect the bulb to Govee Home.
- Check whether your smartphone Wi-Fi is enabled. Ensure you are connected to a 2.4GHz Wi-Fi band (5GHz band is not supported).
- Ensure you have entered the correct Wi-Fi password during the Wi-Fi setup.
- Make sure the distance between the bulb and the router is less than 50ft.
- Check whether the bulb is powered on.
- Check whether your home network is stable by connecting the bulb to another smartphone hotspot.
-
The bulb lost connection.
- Check whether the device is powered on.
- Check whether your home network is stable.
- Check if there are too many devices connected to the router by connecting the bulb to another smartphone hotspot.
- Go to “My Devices” in the Govee Home app and delete the bulb. Then, reconnect it to the Wi-Fi, following the on-screen instructions.
-
How do I create a new scene on the Govee Home app?
- Go to “My Devices” and select “Scene”.
- Tap the “+” icon at the top right corner to create a new scene.
Note: Select different classes based on your needs.
-
Can I use group control with voice assistance?
Please set voice group control in Alexa/Google Assistant App. -
Can multiple users control one bulb?
- Each bulb can only be managed by one account.
- If multiple users want to operate the same bulb, ensure that they are using the same account.
-
How many bulbs can be connected to my smartphone?
Up to 50 bulbs can be connected to one smartphone if the network connection is stable.
Customer Service
- Warranty: 12-Month Limited Warranty
- Support: Lifetime Technical Support
- Email: support@govee.com
- Official Website: www.govee.com
Gove Home App
For FAQs and more information, please visit
www.govee.com
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Govee is a trademark of Shenzhen lntellirocks Tech Co.Ltd.
Copyright ©2020 Shenzhen lntellirocks Tech
Co.Ltd. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>