How to Set Up Your Grizzl-E Charger with AMPUP Instructions
- June 5, 2024
- GRIZZL-E
Table of Contents
How to Set Up Your Grizzl-E Charger with AMPUP
Connect Grizzl-E to Wi-Fi
The following instructions are for all Grizzl-E Smart purchased January 31, 2022 and after.
- Step 1: Open the Wi-Fi Settings on your phone or desktop. Select the network UCSmart [ChargerSerial#]
- Step 2: Open your browser page. Type in the IP address 192.168.4.1.
- Step 3: Select the Wi-Fi SSID from the Wi-Fi Name field.
- Step 4: Enter the Wi-Fi network password and confirm the password below.
- Step 5: Select Other under Charging Network.
- Step 6: Enter the following URL into the Enter Network field:
- centralsystem.ampup.io/ocpp/united-chargers/[ChargerSerial#]
- Step 6: Select the Submit button.
- Step 7: Verify that your device is connected. If connection is successful the indicator light will alternate between Blue and Cyan.
Set Up Charger on AmpUp
- Step 1: From the home screen/login screen, select the Profile Screen.
- Step 2: Select the My Home Charger field.
- Step 3: Select the Add Charger button.
- Step 4: Select Grizzl-E from the Charger Brand drop down list. Confirm that you have configured your Grizzl-E Charger. (Completed when charger was connected to Wi-Fi).
- Step 5: Enter the following into Add Home Charger Form:
- Enter the Charger Serial Number in the Charger ID field.
- Enter your phone Number in the Host’s Number field.
- Enter your address into the Address field.
- Select Level 2 for Charger Level
- Enter the Charging speed based on the units DIP Switches: 9.6kW for 40A, 7.7kW for 32A, 5.8kW for 24A, 3.8kW for 16A
- Select J1772 for Plug Type.
- Step 6: Select the Next button.
- Step 7: Review the information and Select the Confirm button. Set Up Charger on AmpUp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>