Manhattan 153546 2-Port DisplayPort KVM Switch User Manual
- June 3, 2024
- Manhattan
Table of Contents
153546 2-Port DisplayPort KVM Switch
User Manual
For additional benefits
Scan to register your product warranty or visit:
register.manhattanproducts.com/r/153546
Setup
- Connect a keyboard and a mouse to the USB ports.
- Connect the display to the DisplayPort output
- (Optional) Connect a mic, a speaker, or both to the KVM outputs.
- Use the included combo cables to connect appropriate ports on your computers (DisplayPort, USB-A, mic, and speaker cables) to the KVM inputs (DisplayPort, USB-B, and combo audio cable).
- (Optional) Plug in a USB device to the USB hub port on the front of the KVM switch.
- Turn on your connected computers and equipment.
- This KVM switch is USB powered. If more power is needed, connect an appropriate power supply (9.0 V / 0.3 A) to the power input. 8 Switch between your computers via the buttons on the front of the KVM switch (a buzzer sounds to indicate success) or use the hotkeys described below.
• LEDS: Red = computer is online; Green = computer is selected
NOTE: If it is necessary to turn off the power to the switch, you must do the following before turning it back on:
- Unplug the data cables from all the computers connected to the switch.
- Unplug the power adapter cable from the switch if one is connected.
- Wait 10 seconds. If a power adapter is connected, plug the power adapter cable back into the switch.
- Connect the computer data cables and turn on the computers.
Hotkeys
Hotkeys let you use the keyboard to perform switch functions such as
selecting a different computer, turning the buzzer on or off, and more. This
switch provides four hotkey combination modes you can choose from: 【CTL 】+
【SHIFT】, 【SCROLL】+【SCROLL】,【NUM】+【NUM】and【CAPS】+【CAPS】. The following table
shows hotkey combinations that use the primary hotkey inputs【CTL】+【SHIFT】 and
how to switch to the other modes. If you switch to a new hotkey combination
mode, the key combinations to complete a function are the same after you press
the new primary inputs (for example, if you change the hotkey combination mode
to【NUM】+【NUM】, 【NUM】+【NUM】+【B】 turns the buzzer on or off). The default hotkey
combination to switch to the next online computer port in any mode is
(left)【CTL】+【CTL】. Be sure to press the hotkey combinations quickly; each key
times out after five seconds. For the complete list of commands, go to
manhattanproducts.com.
【CTL】+【SHIFT】Mode
| Function | Hotkey Combination |
|---|---|
| Switch to the next online computer port | 【CTL 】+ 【CTL 】 |
| Select port by number | 【CTL 】+ 【SHIFT】+ 【1 】or 【2 】 |
| Next port | 【CTL 】+ 【SHIFT】+ 【➡ 】or 【⬇ 】 |
| Previous port | 【CTL 】+ 【SHIFT】+ 【⬅ 】or 【⬆ 】 |
| Enable/disable the buzzer | 【CTL 】+ 【SHIFT】+ 【B 】 |
Enable/disable automatic switching mode, the default is 5 seconds, press 【ESC】
to exit| 【CTL 】+ 【SHIFT】+ 【S 】
Adjust the auto-switch time, and press 【ESC】 to exit| 【CTL 】+ 【SHIFT】+ 【S 】+
【N 】
Switch to 【SCROLL】+ 【SCROLL】hotkey combination mode| 【CTL 】+ 【SHIFT】+ 【SCROLL
】
Switch to 【NUM】+ 【NUM】hotkey combination mode| 【CTL 】+ 【SHIFT】+ 【NUM 】
Switch to 【CAPS】+ 【CAPS】hotkey combination mode| 【CTL 】+ 【SHIFT】+ 【CAPS 】
Changing the Automatic Switching Interval
To change the number of seconds that pass before the KVM switch
automatically switches to the next online computer, use the hotkey combination
for this function shown above (【CTL 】+ 【SHIFT】+ 【S 】+ 【N 】). [N] represents
the number keys 1 – 9, which refer to the number of seconds as shown in the
chart below:
| N | Seconds |
|---|---|
| 1 | 5 |
| 2 | 10 |
| 3 | 15 |
| 4 | 20 |
| 5 | 25 |
| 6 | 30 |
| 7 | 35 |
| 8 | 40 |
| 9 | 60 |
For specifications, go to manhattanproducts.com. Register your product at register.manhattanproducts.com/r/153546 or scan the QR code on the cover.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric Equipment (applicable in the E.U. and other countries
with separate collection systems:
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
manhattanproducts.com
This device complies with the requirements of CE 2014/30/EU and/or 2014/35/EU.
The Declaration of Conformity is available at:
support.manhattanproducts.com/barcode/153546
North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677, USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved. Manhattan is a trademark
of IC Intracom, registered in the U.S. and other countries.
****Printed on recycled paper
Documents / Resources
|
Manhattan 153546 2-Port DisplayPort KVM
Switch
[pdf] User Manual
153546, 2-Port DisplayPort KVM Switch, 153546 2-Port DisplayPort KVM Switch,
DisplayPort KVM Switch, KVM Switch, Switch
---|---
|
manhattan 153546 2 Port DisplayPort KVM
Switch
[pdf] User Manual
153546 2 Port DisplayPort KVM Switch, 153546, 2 Port DisplayPort KVM Switch,
DisplayPort KVM Switch, KVM Switch, Switch
References
- Manhattan Products: HDMI Adapters, Cables, TV Mounts, Barcode Scanners
- Manhattan Products Account and Product Registration
- Manhattan Products Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>