MACWHeeL ESS2 Electric Scooter Instruction Manual
- June 5, 2024
- MACWHEEL
Table of Contents
ESS2
Thank you for purchasing
Thank you for purchasing the Mac wheel Electric Scooter. It is a sports and
recreational vehicle with style.
Package Contents
Accessories
Carefully check package contents, if anything is missing or damaged, please contact online customer service for support.
Product Overview
Control Panel
|
Battery level display
The power level is indicated by five power lights on the control panel. As
power is consumed, the lights will change from solid to flashing, and finally,
turn off from up to down. When the bottom power light flashes, it indicates
low power. Please recharge soon for further use. After running out of power,
all lights will turn off, and the scooter will coast until it comes to a
complete stop.
Power button
Press and hold the power button for 2s to turn on/off the scooter. Press the
power button once to turn on/off the front light. Quick press the power button
twice to change the gear station. Long press the power button for 5s to enter
into the cruise control mode.
---|---
Assembly and Set-Up
1. Fasten the handlebar stem on the headset, and put the kickstand down| 2.
Attach the handlebar to the stem
---|---
|
3. Tighten the screws onto both sides of the stem with the hexagon wrench|
4. After the assembly, press the power button to check if it’s working
properly
|
Charge Your Scooter
How To Ride
Wear helmets and knee pads in case of falls and injuries when you learn to ride the scooter
1. Turn on the scooter, and check the power indicator| 2. Step on the deck
with one foot, and slowly kicks off the other on the ground
---|---
|
3. When the scooter starts to coast, put both feet on the deck and press the
accelerator (the accelerator initiates once the coasting speed exceeds 3.1
mph)| 4. Release the accelerator and the kinetic energy recovery system
(KERS) initiates automatically to brake slowly; And squeeze the brake lever
for a sudden brake
|
5. Tilt your body in the steering direction as you turn, and slowly turn the
handlebar|
|
Safety Instructions
Watch out for safety risks
Do not ride in the rain| Keep your speed between 3.1-and 6.2 mph when you
ride through speed bumps, elevator door sills, bumpy roads, or other uneven
surfaces. Slightly bend your knee to better adjust mentioned surfaces
---|---
|
Look out for doors, elevators, and other overhead obstacles| Do not
accelerate when you go downhill
|
Do not press the accelerator when you’re walking alongside the scooter|
Always steer clear of obstacles
|
Do not hang bags or other heavy stuff on the handlebar| Keep both feet on the
deck all time.
|
Do not try following dangerous actions
Do not ride in traffic lanes or residential areas where vehicles and
pedestrians are both allowed| Do not turn the handlebar violently during
high-speed riding
---|---
|
Do not ride in a ponding that is higher than 0.78 inches| Do not ride with
anyone else, including children
|