Shenzhen Godo Cultural Originality MUYGS-WZ01 Art Speaker Instructions
- June 5, 2024
- Shenzhen Godo Cultural Originality
Table of Contents
MUYGS -Let every wood have its own story
Instructions
MUYGS
- Art Speaker –Listen, the wood is telling the story
MUYGS –Let every wood have its own story
The “MUYGS” brand is an original brand created by Mr. Cheng Lin, a designer from Shenzhen. It is the masterpiece of Mr. Cheng Lin who returns to nature after having experienced the foppish rococo of the industry for many years. It is aimed at looking for the power to return to the original in this era of rapid development. Attributing to his love for the art of wood, he integrates emotional design, modern art design, and craftsman-level spirit into the works. With wood as a carrier, he cross-develops and creates a temperamental life product. The design concept of “let every wood have its own story” is to reflect the artistic vitality of wood.
MUYGS· Art Speaker: Listen, the wood is telling the story
MUYGS· Art Speaker is evolved from the ‘phonograph’ in the 1930s, the
‘broadcast speaker’ in the 1960s, and the “earphone” in the 2000s. It’s an
artisan-class speaker that gives the times a classic. The product is made of
the superior wood selected with surrealistic cross-border design and is hand-
polished at craftsman grade. With professional sound quality, it intends to
reflect the golden years and classic feelings of people.
MUYGS· Art Speaker — Specifications
Bluetooth 5.0 TWS Support AUX function
Wireless range: ≧10m
Rated output power: 4.5W x 1(THD+N=1% FO=1KHZ)
Signal‐noise Radio: ≧75Db
Total Harmonic Distortion: ≦1%
Frequency response: 35HZ ‐ 20KHZ(‐6Db)
Input sensitivity: (500MV)AUX
Loudspeakers unit: 45mm 4Ω8W(Inner magnetic)
Charging voltage/current: DC 5V/1A
Power supply: 3.7V 1500mAh
Playtime: About 6H
Size of product: 285x100x100(mm)
MUYGS· Art Speaker — Schematic Diagram of Operation Area
A. On/Off key
B: TWS connection
C: Next / Volume +
D: Previous / Volume –
E: Phone key
F: Indicator light
G: Audio-in interface
H: Charging interface
MUYGS· Art Speaker — Instructions of Keys
A. “On/Off” key: Hold the “On/Off” key for 3 seconds to turn on the
audio, with the prompt tone “tat-tat-tat”.
B. “M” key: Press shortly or touch the “M” key for function switching
(Bluetooth state / LINE IN state), hold any audio for 5 seconds to enter the
networking and pairing of the two audios (i.e. TWS function).
C. “+” key: Press shortly this key to reach the next piece and hold it to
increase the volume.
D. “-” key: Press shortly this key to reach the previous piece and hold
it to decrease the volume.
E. Phone key: Press shortly this key to realize the pause in BT state,
and to answer the call and hang up in call state; hold this key to disconnect
Bluetooth.
F. Indicator light: work indicator light. During charging, the red light
will be on, and, after full
charging, the red light will be off.
MUYGS· Art Speaker: Mode and State Description
(一) BT (Bluetooth) Mode:
- After power-on, the Speaker will be in BT state by default. The blue and green lights will flash alternately after turn-on.
- Turn on the mobile phone, connect to the Bluetooth end and search for “MUYGS· Earphone King” for pairing. After pairing, a “music alert tone” will be heard, indicating that the connection is successful, and the blue indicator light will be normally on.
- When the Bluetooth is disconnected, the speaker will automatically return to the TWS mode and the blue and green lights will flash alternately.
(二) AUX Mode:
- Turn on the ON/Off key, and the speaker will be in TWS state by default after power-on. The blue and green lights will flash alternately after turn-on.
- Insert the AUX audio cable, then the speaker will automatically switch to AUX mode and the green light will be normally on.
- Unplug the AUX audio cable, then the speaker will automatically switch to the TWS mode display state and the blue and green lights will flash alternately. In the BT mode, insert the audio cable, then it will automatically switch to the AUX state.
(三) External Power Supply State:
- When the external power supply is connected in the turn-off state, the indicator light will be normally on in red.
- When the external power is connected in a turn-on state, the indicator light will be purple-red.
(四) TWS State (Two Bluetooth Speaker):
- The blue and green lights will flash alternately after the two products are turned on but not paired and connected.
- Hold the “M” key of any speaker for about 5 seconds to enter pairing mode.
- After the pairing is successful, the blue light of the host will flash and the green light of the slave will flash slowly. Then use the mobile phone Bluetooth to search for a connection. After the connection is successful, the blue light of the host will be normally on and the blue light of the slave will flash slowly.
http://weixin.qq.com/r/My5eRuXEpLjbraEl93sh
MUYGS· Art Speaker
Shenzhen Godo Cultural Originility Co., Ltd.
Add Room 18, Floor 2, Building Y1, Creative Park, No.5 Yayuan road,
Longgang District, Shenzhen China
Tel: +86 0755 25331549
E-mail: xuan@muygs.cn
Web: www.mugs.cn
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>