BlackBerry ITE100-1 Radar R2 Instructions
- June 5, 2024
- BlackBerry
Table of Contents
BLACKBERRY RADAR R2 ITE100 – 1
June 2020
Safety Information
Safety information
Before you start using the BlackBerry Radar™ R2 device (hereinafter referred
to as device), review the safety and regulatory information provided in this
document. Keep this document in a safe place so that you can refer to it
whenever you need it.
In some countries, there may be restrictions on using wireless devices with
encryption software. Check with your local authorities for the restrictions in
your area.
To find the latest safety and product information, visit:
docs.radarblackberry.com/guides/user
guide safety
Important safety precautions
| Do not use the device near medical devices, including pacemakers and hearing
aids, because they might malfunction and cause serious harm or death to you or
others.
---|---
| Do not dispose of the device, or battery, in a fire because this might cause
an explosion resulting in serious injury, death, or property loss.
| The device is designed to be operated in temperatures between -40 and 185°F
(-40 and 85°C) and with 0-100% humidity. Store devise in temperatures between
14 and 86°F (-10 and 30°C) and 0-50% humidity. Do not expose the device to
temperatures above 212°F (100°C). Use of the device outside of the recommended
temperature range could cause damage to the device or lithium-metal battery.
| Do not submerge the device in water. The battery should never be exposed to
water.
| Do not puncture, crush, or expose the battery to severe physical shock. Do
not attempt to disassemble the battery pack. Do not short-circuit the battery
or allow metallic or conductive objects to contact the battery terminals.
| The device is not intrinsically safe and should not be used in the presence
of explosive fumes, explosive dust, or other explosive chemicals. Sparks in
such areas could cause an explosion or fire resulting in serious injury,
death, or damage to property.
Operating temperature and humidity
The BlackBerry Radar R2 is designed for the following temperature and humidity ranges:
| Operation: | Storage: |
|---|---|
| Temperature: -40 to 185°F (-40 to 85°C) | Temperature: 14 to 86°F (-10 to 30°C) |
| Humidity: 0-100% | Humidity: 0-50% |
Battery safety
The device contains a non-rechargeable, Lithium Metal battery. Do not attempt
to recharge the battery.
The battery might present a fire, explosion, chemical burn, or another hazard
if mistreated. Do not put the battery in contact with liquids. Do not heat the
battery above 212°F (100°C). Heating the battery above 212°F (100°C) could
cause the battery to catch fire or explode.
Antenna
Use only the supplied integrated antenna. Unauthorized antenna modifications
or attachments could damage the device and might violate U.S. Federal
Communications Commission (FCC) or other regulations.
Repair
Do not attempt to modify, disassemble, or service the device. Do not attempt
to recharge the battery. Only qualified service personnel should perform
repairs to the device.
Failure to observe all safety instructions contained in the user documentation
for the device will void the Limited Warranty and might lead to suspension or
denial of services to the offender, legal action, or both.
Device and battery disposal
| Do not dispose of the device, or battery, in household waste bins or in a
fire.
---|---
| The device and battery are recyclable where facilities exist. This symbol is
not intended to indicate the use of recycled materials.
The Lithium Metal Batteries used in BlackBerry Radar can pose a risk of fire,
explosion, and severe burn hazards if mishandled or damaged. These batteries
should never be placed in regular waste and must be recycled through
appropriate e-waste or battery recycling channels. Ensure you dispose of your
BlackBerry Radar device and its battery are in accordance with the laws and
regulations in your area. If you have an existing waste management
partner, please consult with them regarding disposal, or visit
BlackBerry.com/RadarSuonort for more
information.
Refer to the BlackBerry Radar Battery Information Sheet for details on dimensions, weight, and Lithium content per battery. Safety Data Sheets can be provided upon request.
Compliance information
Exposure to radio frequency signals
The device radio is a low-power radio transmitter and receiver. It is designed
to comply with Federal Communications Commission (FCC) and Innovation, Science
and Economic Development Canada (ISED), and The Council of the European Union
guidelines and limits, as well as other relevant international guidelines
regarding safety levels of radiofrequency exposure for wireless devices. These
guidelines were developed by independent scientific experts, governments, and
organizations including the Institute of Electrical and Electronics Engineers
Standard (IEEE), National Council on Radiation Protection and Measurements
(NCRP), and International Commission on Non-Ionizing Radiation Protection
(ICNIRP).
This device complies with FCC, ISED, EU, and other relevant international
radiofrequency exposure guidelines and limits, at a minimum separation
distance of 7.9 inches or (20 cm).
Federal Communications Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
– Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
– This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Innovation, Science and Economic Development Canada certification
This device complies with Innovation, Science, and Economic Development Canada
(ISED) license-exempt RSS standard(s). Operation is subject to the following
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
ICES-003 (Class B compliance)
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in
radios.
Cet appareil et son antenne ne doivent pas etre situes ou fonctionner en
conjonction avec une autre antenne ou un autre emetteur, exception faites des
radios integrees qui ont ete testees.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
EU regulatory conformance
Hereby, BlackBerry declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: docs.radar.blackberry.com/guides/user guide conformity.
Additional regulatory conformance
specific details about compliance with the standards and regulatory bodies for
the device may be obtained from BlackBerry.
Product information: BlackBerry Radar R2 ITE100-1
Mechanical properties:
Weight: approximately 11.3 oz (320 g) including lithium-metal battery
Size: (L x W x H): 6.7 x 3.7 x 1.7 in. (169 x 93 x 42 mm)
Power specifications:
Non-rechargeable lithium-metal battery
3.6V, 19Ah nominal
Mobile network radio specifications:
No cellular modem.
SubGHz: 868.275MHz and 902-928MHz
Radio specifications:
868MHz: 868-868.6 MHz
915MHz: 902-928MHz
MAX radio conducted power information (EIRP):
868MHz: 13.33 dBm
915MHz: 12.93 dBm
Legal notice
©2020 BlackBerry. All rights reserved. BlackBerrr, BlackBerry RadarTM, and
related trademarks, names, and logos are the property of BlackBerry Limited
and are registered and/or used in the U.S. and countries around the world.
CTIA – The Wireless Association is a trademark of CTIA – The Wireless
Association. GSM is a trademark of the GSM MOU Association. LTE and UMTS are
trademarks of the European Telecommunications Standards Institute (ETSI). All
other trademarks are the property of their respective owners. This
documentation including all documentation incorporated by reference herein
such as documentation provided or made available on the BlackBerry website is
provided “as is” and without condition, endorsement, guarantee, representation
or warranty, or liability of any kind by BlackBerry Limited and its affiliated
companies, all of which are expressly disclaimed to the maximum extent
permitted by applicable law in your jurisdiction.
The terms of use of any BlackBerry product or service are set out in a
separate license or other agreement with BlackBerry applicable thereto.
NOTHING IN THIS DOCUMENTATION IS INTENDED TO SUPERSEDE ANY EXPRESS WRITTEN
AGREEMENTS OR WARRANTIES PROVIDED BY BLACKBERRY FOR PORTIONS OF ANY BLACKBERRY
PRODUCT OR SERVICE OTHER THAN THIS DOCUMENTATION.
BlackBerry Limited
2200 University Avenue East
Waterloo, Ontario
Canada N2K 0A7
BlackBerry UK Limited
Ground Floor, The Pearce Building, West Street
Maidenhead, Berkshire SL6 1RL
United Kingdom
Published in Canada