BRILLIANCE BRI WiFi Smart Socket 2 User Manual
- June 5, 2024
- BRILLIANCE
Table of Contents
BRILLIANCE BRI WiFi Smart Socket
Product Description:
The Brilliance WiFi Smart Socket is designed specifically for your landscape
lighting transformer and provides remote control of your entire lighting
system. Supported on operating systems Android 4.1 or IOS6.0 or newer.
- Power Rating: 100-240VAC 10A
- AC Frequency: 50/60Hz
- Operating temperature: -10°C~+40°C
- Wi-Fi Standard: WI-Fi 2.4GHz b/g/n
- App Support: Android 4.1 and I0S8.0 or higher
Download APP:
OR sean:h “Brilliance Smart” in the Af’P store.
Operating Instructions
- Download “Brilliance Smarf’ from Apple App Store or Google Play. Register aero.mt if first time user.
- Connect to the transformer, hold the power button down for 5 seconds, the light will start lo blink rapidly.
- Open the app.
- W the device is found via Bluetooth, tap Go To Add, then select Smart Socket
- To add via WiFi, connect the Smart Socket and your phone the same 2.4ghz WiFi router. Tap the plus(+) at the upper-right comer and select Smart Socket
- Enter your correct 2.4 GHz Wifi information and tap Next
- Once added, tap the pencil button lo rename the device and press Done.
FCC
FCC WARNING.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment
FCC STATEMENT
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant lo part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
resldenllal Installation. This equipment generates, uses and can radiate radio
frequency energy and, If not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that lnterterence will not occur In a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>