LAMOUR BRILLIANCE Engagement Ring Lab Diamond Instructions
- July 30, 2024
- LAMOUR BRILLIANCE
Table of Contents
LAMOUR BRILLIANCE Engagement Ring Lab Diamond
HOW TO USE THIS GUIDE
Begin by printing this page. Set page scaling to “100” in your print settings and use 8.5 x 11-inch standard paper. Once it’s printed, use a ruler to confirm the printed paper size in the box to the right. Size away!
CONFIRM PRINTED PAPER SIZE
PLEASE READ CAREFULLY
Measure the above bar to ensure it is printed exactly 2 inches (50mm) long.
If the measurement is not accurate, your ring size will not be accurate.
FIND YOUR FIT
METHOD 1: PRINT A RING SIZER
What you’ll need:
Scissors
- Cut out the ring sizer and the slot as instructed.
- Wrap the paper ring sizer snuggly around the base of the intended finger so that the numbers are visible and insert the pointed end through the slit you made in the sizer.
- Note the number that lines up with the slit; this is your ring size! Remember that quarter sizes are also available if your sizer indicates that you are between whole and half sizes.
METHOD 2: MEASURE AN EXISTING RING
What you’ll need:
- Scissors
- An existing ring
- Choose a ring that correctly fits the intended finger.
- Lay the ring over each size circle within the chart until you can closely match the inside edge to one of the circles on the guide. This is your ring size! If the ring falls between two sizes, contact us to order the quarter size between them.
Need Help? Contact Us! contact@lamourbrilliance.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>