choetech 10000mAh USB-C PD 20W Power Bank User Manual

: June 5, 2024
: CHOETECH

Table of Contents

Package Includes
Using the Portable Charger
Important Safety Instructions
Specifications
FCC Compliance Statement
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

choetech 10000mAh USB-C PD 20W Power Bank User Manual

Package Includes

1 x CHOETECH Portable Charger; 1 x USB Charging Cable: 1 x User Manual. x After-Sale Card

Using the Portable Charger

Check the Battery Capacity of the Portable Charger
Charge Your Device
Recharge the Portable Charger

Cautions
Risk of fire and burns. Do not disassemble, crush, heat above 60°C/140T or incinerate. Follow manufacturer’s instructions.

Important Safety Instructions

Warning — When using this product, basic precautions should always be followed, including the following:

Read all the instructions before using the product.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not put fingers or hands into the product.
Do not expose power bank to rain or snow.
Use of a power supply orcharger not recommended or sold by power bank manufacturer may result in a risk of fire or injury to persons.
Do not use the power bank in excess of its output rating.Overload outputs above rating may result in a risk of fire or injury to persons.
Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the power bank.Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
Do not expose a power bank to fire or excessive temperature. Exposure to fire or temperatu-re above 100 C may cause explosion. The temperature of 100 C can be replaced by the temperature of 212 F .
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Switch off the power bank when not in use.

Attention

To recharge the power bank at optimal 18W fast charge speed, a PD/QC fast charge adapter (not included) is required.
When charging two devices simultaneously, the power bank will intelligently switch from fast to normal charge at 5W.
To achieve PD 20W fast charging for iPhone 8-12, we strongly recommend using original or MFi-certified C to Lightning cable.

Specifications

C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
E-mail: info@ce-connection.de Tel: 0049 069/27246648

Manufacturer: Shenzhen DAK Technology Co., Ltd.
Address: RM 305, 3F, BLDG No. 4, Demei Industrial CTR, Fukang Community, Longhua St., Longhua District, Shenzhen, China
Contact info: support@choetech.com

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.