STREAMLINE HRM4-SSGP Stainless Steel Wheeled Metal Hose Reel Instruction Manual

STREAMLINE HRM4-SSGP Stainless Steel Wheeled Metal Hose Reel Instruction Manual

Contents Include

• A = 2 x Rotary Drums
• B = 2 x Support Frames
• C = 1 x Axle Frame
• D = 1 x Centre Manifold (RM007-HRM4)
• E = 1 x Outlet Connector with Washer (RM004)
• F = 2 x Spacers (RM014)
• G = 1 x Inlet Connector with Washer (BHA-TA34)
• H = 1 x Rotary Drum Joiner (RM006)
• I = 1 x Rewind Handle (RM008)
• J = 2 x Pairs Frame Clamps (RM010)
• K = 1 x M6 Bolt & Nut
• L = 10 x M4 Nuts & Bolts
• M = 2 x Wheels and Fittings (RM013)
• N = 2 x Spring Clips (RM002)
• O = 2 x Hub Caps (RM005)

Installation Instruction

1. Step 1: Slide centre manifold (D) through rotary drum (A) and attach using M6 bolt & nut fixing **(K).

**

2. Step 2: Attach outlet elbow (E) to centre manifold (D) and tighten, remembering to insert washer behind the flynut.

3. Step 3: Push drum joiner (H) onto rotary drum **(A).

**

4. Step 4: Push second rotary drum (A) onto the other side of the drum joiner **(H).

**

5. Step 5: Slide the 2 spacers (F) onto the centre manifold (D), one on each side and with the cones facing in towards the rotary drums.

6. Step 6: Loosely assemble clamps (J) using the M4 bolts & nuts (L), so that the support frames (B) and axle (C) can slide into them. Position them on the shoulders of the spacers **(F).

**

7. Step 7: Slide support frames (B) and axle (C) into clamps (J) and ensure they are pushed all the way into position, then tighten all bolts & nuts.

8. Step 8: Fit rewind handle (I) onto the one side and brass inlet connector (G) onto the other side of the centre manifold **(D).

**

9. Step 9: Position wheels (M) onto axle and gently hammer spring clips (N), one each side of reel, onto the axle, clips facing outwards, until wheels are held securely with no lateral movement.

10. Step 10: Push hub caps (O) into place, to cover spring clips.

STREAMLINE®? Warranty

The warranty on all Machines and Equipment is for 1 year (12-months) from RECORDED DATE OF PURCHASE.

THIS WARRANTY EXCLUDES NORMAL MAINTENANCE ITEMS, including but not limited to HOSES, FILTERS, O-RINGS, DIAPHRAGMS, VALVES, GASKETS, CARBON BRUSHES and damage to motors and other components as a result of failure to replace normal maintenance items. THIS LIST IS NOT EXHAUSTIVE.

If STREAMLINE® receives notice of such defects during the warranty period, STREAMLINE® will either, at its opinion, repair or replace components which prove to be defective.

Replacement parts will only be supplied under warranty, upon the inspection and approval of the defective parts by STREAMLINE®.

Should it be necessary to supply replacement parts before the opportunity to inspect, these will be charged at current prices and credit will only be issued upon subsequent inspection and warranty approval by STREAMLINE®.

The customer is responsible for the cost of return of the defective part. If warranty is approved, STREAMLINE® will pay for the cost of the repaired or replacement part.

This warranty excludes the following conditions and circumstances which are at the discretion of STREAMLINE®:

Wear and tear, misuse, abuse improper maintenance, frost damage, the use of chemicals other than those supplied or approved by STREAMLINE®, improper installation or repair, unauthorised modification, incidental or consequential costs, loss or damage, service, labour or third party charges, the cost of returning defective parts to STREAMLINE®.

This warranty constitutes the exclusive remedy of any purchaser of a STREAMLINE® unit and is in lieu of all other warranties, express or implied, including without limitation any implied warranty of merchantability or fitness for use, to the fullest extent permitted by law. In no event shall any implied warranty of merchantability or fitness for use exceed the term of the applicable warranty stated above and STREAMLINE® shall have no other obligation or liability.

Important

Unfortunately these rights cannot be transferred to a third party.

Why STREAMLINE®?

Flexibility

• STREAMLINE® systems can be built according to customers’ exact requirements
• For non-standard systems, the user’s needs or specifications are listened to and turned into reality.

Quality

• Whilst price is important, quality is remembered long after price is forgotten
• We insist on sourcing brand name products from around the world, only of a reputable quality, and bring them together under the STREAMLINE® name
• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’ standard terms and conditions of sale.

Service

• We have an in-house technical helpline able to answer most of your questions relating to the capabilities and functionalities of all STREAMLINE® products
• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately attend to sending you the correct item and arrange a collection of the wrong item without any quibbles
• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a ‘one stop shop’ for all your requirements.

**MANUFACTURED IN THE UNITED KINGDOM

**

CHECKED AND TESTED BY QUALITY CONTROL

Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot
Devon, TQ12 6UD
United Kingdom
Telephone: +44 (0) 1626 830 830
Email: sales@streamline.systems
Visit www.streamline.systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>