PoScope PoNET I2Cextender Buffer User Manual
- June 5, 2024
- poscope
Table of Contents
PoNET I2Cextender
User’s manual
v1.0
Please read the following notes
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice.
- PoLabs does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of PoLabs products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of PoLabs or others. PoLabs claims the copyright of, and retains the rights to, all material (software, documents, etc.) contained in this release. You may copy and distribute the entire release in its original state, but must not copy individual items within the release other than for backup purposes.
- Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of the products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. PoLabs assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information
- PoLabs has used reasonable care in preparing the information included in this document, but PoLabs does not warrant that such information is error-free. PoLabs assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
- PoLabs devices may be used in equipment that does not impose a threat to human life in case of the malfunctioning, such as: computer interfaces, office equipment, communications equipment, test, and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment, and industrial robots.
- Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when PoLabs devices are used for or in connection with equipment that requires higher reliability, for example traffic control systems, anti-disaster systems, anticrime systems, safety equipment, medical equipment not specifically designed for life support, and other similar applications.
- PoLabs devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety, as for example aircraft systems, aerospace equipment, nuclear reactor control systems, medical equipment or systems for life support (e.g. artificial life support devices or systems), and any other applications or purposes that pose a direct threat to human life.
- You should use the PoLabs products described in this document within the range specified by PoLabs, especially with respect to the maximum rating, operating supply voltage range, and other product characteristics. PoLabs shall have no liability for malfunctions or damages arising out of the use of PoLabs products beyond such specified ranges.
- Although PoLabs endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, PoLabs products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by a fire in the event of the failure of a PoLabs product, such as safety design for hardware and software including but not limited to redundancy, fire control, and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures.
- Usage: the software in this release is for use only with PoLabs products or with data collected using PoLabs products.
- Fitness for purpose: no two applications are the same, so PoLabs cannot guarantee that its equipment or software is suitable for a given application. It is therefore the user’s responsibility to ensure that the product is suitable for the user’s application.
- Viruses: this software was continuously monitored for viruses during production; however, the user is responsible for virus checking the software once it is installed.
- Upgrades: We provide upgrades, free of charge, from our website at www.poscope.com. We reserve the right to charge for updates or replacements sent out on physical media.
- Please contact PoLabs support for details as to environmental matters such as the environmental compatibility of each PoLabs product. Please use PoLabs products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. PoLabs assumes no liability for damages or losses occurring as a result of your non-compliance with applicable laws and regulations.
- Please contact PoLabs support at [email protected] if you have any questions regarding the information contained in this document or PoLabs products, or if you have any other inquiries.
- The licensee agrees to allow access to this software only to persons who have been informed of and agree to abide by these conditions.
- Trademarks: Windows is a registered trademark of Microsoft Corporation. PoKeys, PoKeys55, PoKeys56U, PoKeys56E, PoScope, PoLabs and others are internationally registered trademarks.
Introduction
PoNet I2Cextender is the I2C extension device that provides 10 times higher line drive than standard I2C, thus improving data integrity. Up to 25m – 50m long I2C line with CAT3 cable or better-twisted pair is possible, compared to a few tenths of a meter without an I2C extension. In addition to 10 times higher line drive, it can also improve signal integrity in a noisy environment. The device was developed for use with PoKeys CNC controller devices but can be used with other microcontrollers without restriction.
Features
- up to 50m I2C line when using CAT3 or better-twisted pair cable
- compatible with 100 kHz and 400 kHz bus frequency
- simple 6-pin flat cable connection between extenders
- 5 pin PoNET or 10 pin PoExtension connector for connection to PoKeys, Arduino, Raspberry Pi or any other device
- 4,5V – 12V power supply; less than 25 mA current
- 3V operation possible with reduced performance
Connectors and pinout
Two EXT connectors (Micro-MaTch) for flat cable and a PoNet cable are included in the package.
Connection example
The picture below is a typical example of usage where the master device PoKeys57CNC communicate with I2C peripheral unit PoNETkbd48CNC.
Technical specifications
- Input voltage 3-12 VDC
- I2C bus frequency 100 kHz and 400kHz supported
- Operating range up to 50 m
- Working temperature -20 °C ÷ +80 °C
- Weight 4g
- Mechanical dimensions [mm]
5.1 Grant of license
The material contained in this release is licensed, not sold. PoLabs grants a
license to the person who installs this software, subject to the conditions
listed below.
5.1.1 Access
The licensee agrees to allow access to this software only to persons who have
been informed of and agree to abide by these conditions.
5.1.2 Usage
The software in this release is for use only with PoLabs products or with data
collected using PoLabs products.
5.1.3 Copyright
PoLabs claims the copyright of and retains the rights to, all material
(software, documents, etc) contained in this release. You may copy and
distribute the entire release in its original state, but must not copy
individual items within the release other than for backup purposes.
5.1.4 Liability
PoLabs and its agents shall not be liable for any loss or damage, howsoever
caused, related to the use of PoLabs equipment or software unless excluded by
statute.
5.1.5 Fitness for purpose
No two applications are the same, so PoLabs cannot guarantee that its
equipment or software is suitable for a given application. It is therefore the
user’s responsibility to ensure that the product is suitable for the user’s
application.
5.1.6 Mission Critical applications
Because the software runs on a computer that may be running other software
products and may be subject to interference from these other products, this
license specifically excludes usage in ‘mission-critical applications, for
example, life support systems.
5.1.7 Errors
This manual was continuously monitored for errors during production; however,
the user is responsible for error-checking the manual once it is used.
5.1.8 Support
There could be errors in these manuals, but if you found some, please contact
our technical support staff, who will try to fix the problem within a
reasonable time.
5.1.9 Upgrades
We provide upgrades, free of charge, from our website at
www.PoLabs.com. We reserve the right to charge for
updates or replacements sent out on physical media.
5.1.10 Trademarks
Windows is a registered trademark of Microsoft Corporation. PoKeys, PoKeys55,
PoKeys56U, PoKeys56E, PoKeys57U, PoKeys57E, PoKeys57CNC, PoScope, PoLabs,
PoExtBus, PoExtBus Smart, PoRelay8, PlasmaSens, and others are internationally
registered trademarks.
Support:
www.PoLabs.com