Nikon AF Nikkor 50mm f-1.8D Lens User Manual

June 5, 2024
Nikon

Nikon logo NIKKOR
NIKKOR Z40mm f/2
Users Manual (with warranty)

Nikon Europe Service Warranty Card


Model name| NIKKOR Z 40mm f/2
Serial no|
Purchase date|
Name and address of the customer
Dealer
Distributor
Nikon Europe B.V. Tripolis 100, Burgerweeshuispad 101, 1076 ER Amsterdam, The Netherlands
Manufacturer
NIKON CORPORATION Shinagawa Intercity Tower C, 2-15-3, Konan, Minato-ku, Tokyo 108-6290 Japan

Warranty Terms

Your Nikon equipment is guaranteed against any manufacturing defects for one full year from the date of original purchase. If during this period of guarantee the product proves defective due to improper material or workmanship, our authorized service network within the sales territory of Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set below. Nikon reserves the right (at its sole discretion) to replace or repair the product.

  1. This warranty is only provided upon presentation of the completed warranty card and original invoice or purchase receipt indicating the date of purchase, product type and dealer’s name, together with the product.
    Nikon reserves the right to refuse free-of-charge warranty service if the above documents cannot be presented or if the information contained in it is incomplete or illegible.

  2. This warranty will not cover
    necessary maintenance and repair or replacement of parts due to normal wear and
    modifications to upgrade the product from its normal purpose as described in user manuals, without the prior written consent of
    transport costs and all risks of transport relating directly or indirectly to the warranty of the
    any damage resulting from modifications or adjustments which may be made to the product, without the prior written consent of Nikon, in order to comply with local or national technical standards in force in any other country than the ones for which the product was originally designed and/or

  3. The warranty will not be applicable in the case of:
    damage caused by misuse including but not limited to failure to use the product for its normal purpose or according to the user instructions on the proper use and maintenance, and to installation or use of the product inconsistent with the safety standards in force in the country where it is used.
    damage caused by accidents including but not limited to lightning, water, fire, misuse or
    alteration, defacing, illegibility, or removal of the model or serial number on the product
    damage resulting from repairs or adjustments which have been conducted by unauthorized service organizations or
    defects in any system into which the product is incorporated or with which it is used.

  4. This service warranty does not affect the consumer’s statutory rights under applicable national laws in force, nor the consumer’s right against the dealer arising from their sales/purchase contract.

Notice: An overview of all authorized Nikon Service Stations can be found online by following this link https://www.europe-nikon.com/service/Nikon
AF Nikkor 50mm f 1 8D Lens - overview

Before using this product, please read these instructions carefully. You will also need to consult the camera manual.

  • This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z
  • Update the camera firmware to the latest With earlier versions, the camera may fail to detect the lens correctly and some features may not be available. The latest version of the camera firmware can be downloaded from the Nikon Download Center at the URL below. http://downloadcenter.nikonimglib.com

For Your Safety

To prevent damage to property or injury to yourself or to others, read “For Your Safety’ in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.
WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION: Failure to observe the precautions marked with this icon could result in injury or property damage.
WARNING

  • Do not touch internal parts that become exposed as the result of a fall or other accident. Do not disassemble or modify this product.
    Failure to observe these precautions could result in electric shock or another injury.

  • Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the camera power source.
    Continued operation could result in fire, bums, or another injury.

  • Keep dry.
    Do not handle it with wet hands.
    Failure to observe these precautions could result in fire or electric shock.

  • Do not use this product in the presence of flammable dust or gas such as propane, gasoline, or aerosols.
    Failure to observe this precaution could result in an explosion or fire.

  • Do not directly view the sun or other bright light sources through the lens.
    Failure to observe this precaution could result in visual

  • Keep this product out of reach of children.
    Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.

  • Do not handle with bare hands in locations exposed to extremely high or low temperatures.
    Failure to observe this precaution could result in burns or frostbite.

  • Do not leave the product where ’twill be exposed to extremely high temperatures, bran extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction.

  • Do not transport cameras or lenses with tripods or similar accessories attached. Failure to observe this precaution could result in injury or product

CAUTION

  • Do not leave the lens pointed at the sun or other strong light sources.
    Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fire.

  • Do not leave the product where ’twill be exposed to extremely high temperatures, bran extended period such as in an enclosed automobile or in direct sunlight.
    Failure to observe this precaution could result in fire or product malfunction.

  • Do not transport cameras or lenses with tripods or similar accessories attached.
    Failure to observe this precaution could result in injury or product

Notice for Customers in Europe
This symbol indicates that electrical and electronic equipment is to be collected separately.
The following applies only to users in European countries:

  • This product b designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
  • Separate collection and recycling help conserve natural resources and prevent negative conse­quences for human health and the environment that might result from incorrect disposal.
  • For more information, contact the retailer or the local authorities in charge of waste management

Using the Lens

Parts of the Lens: Names and Functions
Refer to the diagram on the upper-left edge of this sheet.

1. Control ring|

Autofocus mode selected:
In autofocus mode, rotate the ring to adjust a setting such as [Focus (WA)] or [Aperture] as­signed using the camera. For more informal- lion, see the description of [Custom control as­ signment], [Custom controls], or [Custom controls (shooting)] in the camera manual.

|

---|---|---
Manual focus mode selected: Rotate the ring to focus.|

2. Lens mounting mark| Use when mounting the lens on the camera.|

See A

3. CPU contacts| Used to transfer data to and from the camera.|

  1. Lens cap (front cap)|

|

  1. Lens cap (rear cap)|

|

A Attachment and Removal
Attaching the Lens

  1. Turn the camera off, remove the body cap, and detach the rear lens cap.
  2. Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body, and then rotate the lens counterclockwise until it clicks into place.

Removing the Lens

  1. Turn the camera off.
  2. Press and hold the lens release button while turning the lens clockwise.

When Shooting
The focus position may change if you turn the camera off and then on again after fo­cusing. If you have focused on a pre-selected location while waiting for your subject to appear, we recommend that you do not turn the camera off until the picture is taken.
Using the Lens on Cameras with a Built-in Flash
Shadows may be visible in photos where light from the built-in flash is obscured by the lens.

Cameras with AF-Assist Illuminators
The lens may block the light from the camera AF-assist illuminator.

Precautions for Use

  • Do not pick up or hold the lens or camera using only the lens
  • Keep the CPU contacts clean.
  • Replace the lens caps when the lens is not in use.
  • Do not leave the lens in humid locations or in locations in which it may be exposed Rusting the internal mechanism can cause irreparable damage.
  • Do not leave the lens next to open flames or in other extremely hot locations. Ex­treme heat could damage or warp the reinforced plastic
  • Taking the lens from a warm to a cold environment or vice versa may cause damaging condensation inside and outside the lens.
  • Place the lens in a sealed bag or plastic case before taking it across a temperature boundary.
  • The lens can be taken from the bag or case once it has had time to adjust to the new temperature.
  • We recommend that you place the lens in a case (available separately) to protect it from scratches during transport.

Lens Care

  • Removing dust is normally sufficient to clean the glass surfaces of the lens.
  • Smudges, fingerprints, and other oily stains can be removed from the lens surface using a soft, clean cotton cloth or lens cleaning tissue lightly dampened with a small amount of ethanol or lens Wipe gently from the center outwards in a circular motion, taking care not to leave smears or touch the lens with your fingers.
  • Never use organic solvents such as paint thinner or benzene to clean the
  • Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens
  • Do not store with naphtha or camphor mothballs or in direct sunlight If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust

Accessories

Supplied Accessories

  • LC-528 Lens Cap (front cap)
  • LF-N I Lens Cap (rear cap)

Compatible Accessories

  • CL-C4 Lens Case
  • 52 mm filters

√filters
fitters Use only one filter at a time.

Specifications

Mount Nikon Z mount
Focal length 40 mm
Maximum aperture f/2
Lens construction 6 elements in 4 groups (including 2 aspherical elements)
Angle of view
  • FX-format: 57°
  • DX-format: 38°50′

Focusing system| Internal focusing system
Minimum focus distance (measured from the focal plane)| 0.29 m (0.96 ft)
Maximum reproduction ratio| 0.17x
Diaphragm blades| 9 (rounded diaphragm opening)
Aperture range| f/2 — 16
Filter-attachment size| 52 mm (P = 0.75 mm)
Dimensions|

Approx. 70 mm (2.8 in.) maximum diameter x 45.5 mm (1.8 in.) (distance to the end of the lens from the camera lens mount flange)

Weight| Approx. 170 g (6 oz)

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

Nikon logo NIKON CORPORATION
Printed in Thailand
7MMA537E-01

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals