TinyLove 130680E001 Tiny Dreamer 3-in-1 Musical Projector Instruction Manual

TinyLove 130680E001 Tiny Dreamer Musical 1-in-3 Projector

WARNING

• This product is not a toy.
• Possible impact injury, keep out of baby’s reach.
• Remove all packaging materials before use.
• Cord may be a strangulation hazard. Keep out of reach of children. Do not use with extension cords.
• Warning. Long cable. Strangulation hazard.
• Battery shall not be exposed to excessive heat as sunshine, fire or the like
• The light source cannot be replaced. The whole  product has to be changed. 2 years Guarantee.
• This product must only be connected to a class II USB transformer marked with the symbol Moreover, this transformer must be a short circuit safety isolating transformer according to IEC 61558-2-6 or a toys transformer according to IEC 61558-2-7, and marked with the symbol
• The transformer must be a safety isolating transformer marked with the symbol

IMPORTANT

• This product is intended for visual stimulation and is not intended to be grasped by a child.
• Avoid dropping the soother or treating it roughly.
• Do not modify or alter this product in any way.
• Adapter not included.
• The rechargeable battery cannot be replaced.
• The product has to be charged out of the reach of children.
• This product is a class III device.
• Product is for indoor use only.
• The product complies with the relevant and applicable EU legislation.
• The product complies with the relevant and applicable UK legislation.
• Use class II transformer.
• A short circuit safety isolating transformer

CLEANING AND STORAGE

1. Unplug the product before cleaning.
2. Use a damp cloth to wipe clean.
3. DO NOT submerge any part of the product in water.

CHARGING INFORMATION

1. The Projector Soother must be charged before being used for the first time:
2. Connect one end of the USB cable to the Projector Soother and the other to the USB transformer.
3. Leave for at least 4 hours to charge.
4. When charging the LED light will be red, when fully charged it turns green.
5. When fully charged, disconnect the USB cable and remove it from the Projector Soother.
6. When battery is almost empty, red LED light will blink. You are therefore advised to charge the Projector Soother.
7. If the Projector Soother is not used for several days, the battery may discharge. You are therefore advised to charge regularly using the USB cable provided.

MP3 PLAYER MODE

• Connect one end of the USB cable to the Projector Soother and the other end to your computer.
• Make sure the Projector Soother is in “on” position.
• The MP3 Player is then automatically recognized.
• In this mode music and projection could not be turn on.

HOW TO USE

For more developmental information and playing tips please visit: www.tinylove.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>