Sum DROP & DOCK Wireless Charging System User Manual

Sum DROP & DOCK Wireless Charging System

INTRODUCTION

This product is a portable mobile power supply, which is mainly used for powering and charging various digital products such as various brands of mobile phones, IPAD, PSP, MP3/MP4, palmtop computers.

1. The built-in battery is charged with a three-stage constant voltage and constant current charging method. The charging input terminal of the product is Type-C interface; the output port is TYPE-C and wireless charging. Support PD3.0/PD2.0 fast charging input Support wireless charging output.
2. TYPE-C intelligent recognition. When a mobile phone is inserted into the fast charging port, the product will automatically turn on the output, charge the device, and shake hands with the powered device. When the powered device meets the 1A or 2.4A requirements, the product will charge The output will automatically output the corresponding optimal output current.
3. When a device is connected to the Type C port, the wireless charging will automatically enter the 5W output state and switch to a regular output. Only after Type-C turns off the output can the wireless charging 10W output be turned on.
4. Hidden LED power display, with soft brightness, will not be dazzling when used at night, and will not affect sleep.
5. Use safe and reliable, built-in intelligent charge and discharge management chip, battery overcharge protection, battery over discharge protection, output over current protection, output short circuit protection, mobile phone full power protection and other multiple intelligent protection functions.
6. Low self-consumption of about 150 microamperes, long standby time.

Product Information

Wireless charger: 12LED warm white FOD: 12LED blue

Product size|
weight|

Built-in battery

method, 0.2C discharged to 3.0V cut-off

Charging method： Three-stage charging

voltage is 5V

Constant voltage charging

| The charging current keeps decreasing with the increase of battery voltage, and finally the

charging current is turned off

|

Battery voltage 4.0-4.2V

Charging method and status description
When the external 5V/DC power supply is connected to the product through contact copper or Type C, the product will charge the built-in battery, and the four white LEDs (25%, 50%, 75%, 100%, respectively) will use the current power The way the light flashes shows the current built-in battery power, as shown in the table below:

When the product is charging

| The first light flashes, two, three, and four lights are off| ◎○○○| Battery power below 25%
---|---|---|---
The first light is always on, the second light is flashing, three or four lights are off|  ●◎○○| Battery power 25%-50%
the  first. Two  or two lights are always on, the

third light is flashing, and the fourth light is off

|  ●●◎○| Battery power

50%-75%

The first, second, and third lights are always on, and the fourth light flashes|  ●●●◎| Battery power 75-100%
After the

product is full

| ****

Four lights are always on

|  ●●●●| ****

full

Battery check under normal state-click the button

Battery check

| One white light is always on, the

other three are off

|  ●○○○| Battery level

0%-25%

---|---|---|---
Two white lights are always on, the other two are off|  ●●○○| Battery power 25%-50%
Three white lights are on, the other

is off

|  ●●●○| Battery power

50%-75%

Four white lights are always on|  ●●●●| Battery power

75%-100%

Battery display when discharging

Battery check

| One white light is always on, the other three are off| ●      ○○○| Battery level 0%-25%
---|---|---|---
Two white lights are always

on, the other two are off

| ● ●○○| Battery power 25%-50%
Three white lights are on, the other is off| ● ●●○| Battery power 50%-75%
Four white lights are always on| ● ●●●| Battery power 75%-100%

Wireless charging instructions
When the wireless charging is turned on and the mobile phone/load is connected, the wireless charging indicator (the frequency of the white breathing light is 2.5 seconds a breathing cycle) When there is a metal foreign body in the position of the wireless charging coil, and the size is larger (more than 1 yuan coin Diameter), the wireless charging circuit will be shown as foreign matter, and the wireless charging output will be stopped (the blue light abnormal indicator will alarm until the foreign matter is removed).
Button function definition: Click to turn on the wireless charging by default, click again to turn off the whole machine, and double-click to turn on or off the wireless charging indicator.

Protection function
Short output
If the USB output terminal is short-circuited due to improper use or other factors, the product will automatically turn off the output to protect the charged device and the product itself. When the short-circuit is removed, there is no need to charge and activate.

Output overcurrent protection
If the output current of the USB port reaches 3.2-3.8A due to improper use or other factors; the product will turn off the output to protect the safety of the device. After the overcurrent status is removed, short press the button to start the output.

Built-in battery protection

Environmental adaptability

OperatingTempera

ture

| Environmental temperature around

the product normal work

| -10| 25| 40
Storage| 1 year| -20| 25| 40
Temperature| 3 month| -20| 25| 40
---|---|---|---|---
1 month| -20| 25| 40
Operating humidity| Environmental humidity around the

product normal work

| 10%| 70%| 90%

Storage humidity

| Storage temperature product

Storage humidity product doesn’t work

| ****

5%

| ****

70%

| ****

90%

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement
NOTE: This device complies with part 18 of the FCC Rules.
Information to the user.

1. The device has potential interference, but the interference is very small and meets the requirements of the FCC rule
2. Equipment system maintenance is simple, please refer to the manual
3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>