NIGHTHAWK LAX20 4 Stream LTE WiFi Router User Guide
- June 5, 2024
- NIGHTHAWK
Table of Contents
NIGHTHAWK LAX20 4 Stream LTE WiFi Router
Quick Start
-
Download
On your mobile phone, download the Nighthawk app, available on Google Play and the Apple App Store, or go to nighthawk-app.com. -
Install
Open the Nighthawk app and follow the step-by-step instructions to set up your router. -
Explore
Check out everything you can do on the Nighthawk app! Run a speed test, pause the Internet, see all the connected devices, and more.
Contents
- Router
- Antenna x 2
- Ethernet Cable
- Power Adapter (varies by region)
Overview
- Power LED
- Internet LED
- 2.4 GHz WiFi LED
- 5 GHz WiFi LED
- Ethernet Ports 1–4 LEDs
- USB 2.0 LED
A :WiFi On/Off Button with LED
B: WPS Button with LED
C :Nano SIM Slot
D :USB 2.0 Port
E: ethernet Ports 1–4
F :WAN Port
G: Power Connector
H :Power On/Off Button
I :Reset Button
Support and Community
Visit netgear.com/support to get your questions
answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
- (If this product is sold in Canada, you can access this document in Canadian French at http://downloadcenter.netgear.com/other/.)
- For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.
- See the regulatory compliance document before connecting the power supply.
- For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
- By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
- © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is
restricted to the indoor environment. This device meets all the other
requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with a minimum
distance of 26cm between the radiator & your body.
Industry Canada statement:
This device complies with RSS-247 of the IThis device complies with ISED’s license-exempt RSS. Operation is subject to the industry Canada Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and) This device may not cause
- this device must accept any interference received, including interference THAT MAY CAUSE UNDESIRED OPERATION
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>