ESTALKY E550 4G Non Screen Device With Uniqued Designed,Durable And Handy User Manual
- June 5, 2024
- ESTALKY
Table of Contents
ESTALKY E550 4G Non Screen Device With Uniqued Designed,Durable And Handy
User Manual
Basic operations
Startup
Press the power on button for 3 seconds, Once the screen goes light up, You
will see the “Startup”, it indicates successful login.
Shut Down
Press the power off button for 3 seconds, Once the screen goes blank, the
smart terminal is fully shut down.
Screen interaction
Channel Switch
Single Click: Lighten the screen/ enter a menu or choose an option
Long Press: Back to the previous menu Double Click: When you are connecting the WI-FI and inputting password, double click to input lowercaseSwitch clockwise/counterclockwise:Switch/back to the next/ previous menu item.
WiFi Connection
Go to the Settings > WiFi interface. Enable the WIFI option (single click
to revert the status), switch to find the right access point you want to
connect to, single click the right access point then input the password in
(Single click to input uppercase, double click to input lowercase). Switch to
select inputting characters. Click “√” to confirm / exit the password
inputting.
GPS Location
Go to the Settings > Location interface, single click to enable or disable
GPS location.
Date & Time Configuration
Go to the Settings > Date&Time interface, single click to configure time
display format.
Bluetooth Connection
Go to the Settings > Bluetooth interface, Switch to choose “PTT Button”,
single click to enable Bluetooth connection, after Scanning for a while,
switch and find the right device name, single click to confirm bonding to the
Bluetooth button, others Bluetooth device please choose “Headset” with the
same operation.
Cellular Data Connection
Go to the Settings > Cellular data interface, single click to revert enable
or disable cellular data connection.
Flashlight
Go to the Settings > Flashlight interface, single click to turn on/ pff the
flashlight. or Press the Vol- and Programmable button at the same time to turn
on/off it.
Battery Percentage
Go to the Settings > Battery percentage interface, single click to show / hide
the battery percentage status on the display screen.
Language
Go to the Settings > Language interface, switch and single click to choose the
right language.
Factory Reset
Go to the Settings > Reset interface, under the interface “Are you sure about
recovery?”, switch the options, choose “Yes” to reset and “No” to exit.
System Information
Go to the Settings > About interface, find the device and SIM card information
including Operation System Version, IMEI Code, Battery Percent, SIM Name, SIM
Level, SIM Type.
System Update
Go to Settings > System Update interface, single click to check updates.
Push-To-Talk Application
Go to the PTT item, single click to enter in the PTT application interface.
Switch between different groups to execute instant communication
Note
**** Before using the product, please read the Quick Guide to fully benefit
from it.
Warranty period is 1 year from date of purchase.
This product involves constant upgrading and/or improvement, our company
reserves the right to change the specifications of software and/or hardware
mentioned in this operating guide without any prior notice.
The product specifications and information mentioned in the operating guide are
for reference only.
Check list
Please check the following accessories before you discard the packing material.Please contact your local dealer immediately if there is any missing or damage parts.
| Accessories | Quantity |
|---|---|
| E550 | 1 |
| USB Data Cable | 1 |
| Battery | 1 |
| Charging Plug | 1 |
| Quick Start Guide | 1 |
Overview of E550 LED indicator light LED indicator light
Indication
LED indicator light
| Operating state | Indication |
|---|---|
| Standby | Green(Blinking) |
| Searching Network | Green(Fast Blinking) |
| Low Battery | Red(Blinking) |
| Charging | Red(Steady) |
| PTT Transmitting | PTT Transmitting |
| PTT Receiving | Green(Steady) |
Installation of SIM card
- Anticlockwise the switch of battery cover,open it and remove battery.
- Insert the SIM card as shown in the picture.
- Insert the SD card into the slot as shown in the picture.
- Put back the battery and the battery cover and press the cover firmly before clockwise the switch.
Charging the Battery
Using Desktop Charger
Connect the Desktop Charger and the Power Adapter using the USB Data Cable. Red light on the desktop charger indicates battery charging in progress. Green light on the desktop charger indicates fully charged.
Using USB Date Cable
Connect the IP smart terminal and power adapter using the USB Data Cable.Red light on the IP smart terminal indicates battery charging in progress. Lights off indicates fully charged.
WARNING: DO NOT USE THE ABOVE TWO CHARGING METHODS SIMULTANEOUSLY.
Important:
Use only the approved and certified charger. Battery must be fully charged
before first use. Do not expose the battery to high temperature. Do not
dismantle the battery.
FCC WARNING
-
a、§ 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
b、§ 15.21 Changes or modification warning.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
c、§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
-
d、Specific Absorption Rate (SAR) information:
This Smart Poc Radio meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. -
e、FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Smart Poc Radio (FCC ID: 2AVAF-E550B) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at when properly worn on the body is 0.909W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. -
f、Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10 mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
T: 86 0755-28267073 Brand
website: www.estalky.com
NO 1109-1110,C1 Block,bantian international center,NO 5 huancheng south
road,long gang district, shenzhen
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>