Speakers BT510 Bluetooth Speaker User Manual
- June 5, 2024
- Speakers
Table of Contents
Speakers BT510 Bluetooth Speaker
Functions Description
Button Keys：
Function keys：
0 Wireless Charger Zone
-
control Key
- Short press to display temperature
- Long press to adjust the light brightness or turn off the light.
-
time key:
- Short press keys to switch clock mode.
- In time mode, long press to set time; short press again to switch clock and minutes
- In alarm clock mode, long press to set the alarm timing; short press again to switch the clock and minutes.
-
mode transfer key
short press transfer to BT/FM/AUX mode; long press check the battery capacity. -
Minus key
- Short press for volume down；
- long press for Previous song/previous FM channel ;
- In time setting mode,short press decrease the number,long press decrease the number continuously.
-
ON/OFF key:
Turn on / off /call / hang up/ Search radio stations automatically / long press 10 seconds for reset the device -
Add key，
- Short press to volume add;
- long press for next/next FM channel;
- In time setting mode,short press increase the number,long press increase the number continuously.
MIC: Hands free microphone.
LED Display Area：
-
Digital display area, display time
-
BT mode, Bluetooth working
-
FM radio mode,FM Radio working
-
Aux in mode,audio cable working
-
First Alarm clock，alarm clock working
-
Second Alarm clock，alarm clock working
Port function： -
3.5mm Aux in port,FM Antenna port
-
USB /OUT DC5V port，charge for mobile
the port on back： -
Type C port，power input
-
wireless charge indicator
How to use
General Functions：
warning！
- Please use charger with safety certification or regular manufacturers.
- Do not charge in your pocket, parcels, flammable debris or in a damp, high-temperature environment.
Clock &LED Display Brightness Settings：
Speakers-BT510-Bluetooth-Speaker-FIG 16
Specifications:
Technical Specification
-
Charge Cable: TYPE C
-
Working Time: about 6 hours calls&music (middle volume)
-
Capacity： DC3.7v 1800mAh
Audio: -
Speaker size : φ50mm
-
Output: 5W
-
Passive Vibrating Diaphragm: φ50mm x1
Connect: -
Bluetooth Version: V5.1
-
Bluetooth Profiles: A2DP，AVRCP HFP HSP
-
Bluetooth Range: Over 10 meters（30 feet）
FM Radio: -
Wireless Spectrum: 76～108MHz
Others
- Port: AUX‐in,TYPE C, USB DC5V 1A output
- Dimensions: 145 x 106 x 72mm
Wireless Charger
- Charging power supply : DC5V 3A (allow wireless charging & USB output charging)
- Potential power level: 5W
- Wireless charging indicator
- Power indicator red light Flashes off 3 times after power‐on；
- Charging indicator green light: flashes off after power‐on, it always lights up when charging the mobile phone, green light flashes slowly after full charge, the mobile phone is biased or green light flashes quickly when a foreign object is detected, and the standby light is off.
Package Content
- Speaker *1 pc
- User Guide *1pc
- Type C Cable *1pc
- 3.5mm Line‐in Cable *1pc
5. Trouble Shooting:
Reset： If the speaker system fails and cannot be turned on or off, press and hold the button for more than 5 seconds to reset
| FAQ | Solution |
|---|
Fail to connected
|
1. If fail to find model name or connect with speaker,please make sure the speaker in pairing mode.
2. Please re-open the Bluetooth function on your mobile/computer if long time fail to connect.
3. Please close other Bluetooth devices to avoid searching problems.
4. Please enter“0000”(4 zeros) if password needed.
No sound when play music
| 1. Please adjust your phone if in minimum volume status
2. Please check the speaker if in pause status.
Speaker stuttering when playing music
| 1. Check if the range are exceed or there is an obstacle between the speaker and the connected devices.
2. Check phone if no enough storage,please restart your phone.
Can not turn ON| No power,please charge and then try again.
Can not charge,no red indicator
| 1. Battery is full ,please charge again after half hours working,red indicator will be on.
2. Charge cable is broken,change new one.
3. Re-open the speaker and try again.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For Bluetooth pair condition
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction. For
Wireless charger condition
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm the radiator your body.