Topcon 333047 Bluetooth Module User Manual

June 5, 2024
Topcon

Since this module is not sold to general end-users directly, there is no user manual of the module.
For the details about this module, please refer to the specification sheet of the module.
This module should be installed in the host device according to the interface specification (installation procedure).
This device complies with part 15 of the FCC Rules.
Part 15 Subpart C
The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.

Model No. Antenna Type Antenna Gain
1029-C17586 Sleeve 2.14 dBi

REGULATION

The following information must be indicated on the host device of this module;
[for FCC] Contains FCC ID: H5P-333047
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe in the user’s manual and also either describe on the device packaging or on a
removable label attached to the device.
[for ISED(IC)] Contains IC: 6050A-333047
The following statements must be described on the user manual of the host device of this module;
[for FCC] FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This
equipment should be installed and operated keeping the radiator at least 20cm or more away from the personʼs body. [for ISED] This device contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canadaʼs licence-exempt RSS(s).
Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
    This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF)

Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from personʼs body.

This radio transmitter (6050A-333047) has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the
maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Antenna type Gain Impedance
Sleeve 2.14 dBi 50 Ω

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals