UGREEN WS111 HiTune T1 True Wireless Earbuds User Manual

June 5, 2024
UGREEN

UGREEN WS111 HiTune T1 True Wireless Earbuds User Manual
UGREEN WS111 HiTune T1 True Wireless Earbuds

Product Overview

Product Overview

1 Noise Cancelling Microphone 5 Silicone Ear Tip
2 Touchpad 6 Pogo Pin Charging Contacts
3 LED Indicator 7 L/R Marking
4 Voice Pickup Microphone

Charging case

Charging case

  1. Charging Port
  2. Reset Button
  3. LED Indicator

Specification

Product name HiTune Tl True Wireless Earbuds
Product model WS111
Version Bluetooth 5.0
Profiles HSP, HIP, AVRCP, A2DP
Bluetooth frequency 2400MHz-2483.5MHz
Bluetooth range 10m
Codec MC, SBC
Frequency response 20Hz-20KHz
Speaker impedance 160
Speaker sensitivity 97–1–3dB
Microphone sensitivity -38–1–3dB
Earbuds battery capacity 2′ 5DmAh
Charging case battery built-in Lithium polymer battery
Charging case capacity 50DmAh 3.7V (1.85Wh)
Charging limited voltage 5V
Charging port USB-C
Fully charge the earbuds 1.5hrs
Fully charge the case 2hrs
Charging case input 5V 400mA
Charging case output 5V:7 100mA
Operating time 5.5hrs music play on a single charge

24hrs music play with charging case

Get ready for use

Using instruction

  1. First charging
    Ensure to remove the insulating film of both L/R earbud on its first use, and fully charge both earbuds and charging case by a standard 5V/lA adapter.

  2. Multi-sized Ear tips
    HiTune T1 Earbuds come with four sizes of ear tips. The medium size comes already attached, and the other three sizes are in the packaging box. For a comfortable fit and optimal audio performance, please select the best-sized ear tips and make a good seal with your ear canal.

Connection and operation

  1. Earbuds Power On/Off
    Auto-On: Open the charging case and take out the earbuds. Auto-Off: Return the earbuds to the charging case and close it. Manual-On: When earbuds are OFF, press the Touchpad fort seconds. Manual-Off: When earbuds are ON, press and hold the Touchpad for 6 seconds.

  2. Bluetooth Connection

  3. TWS Mode L/R earbud will be paired automatically while opening the
    charging case, then earbuds will connect to your smartphone.

  4. First Connection Turn the Bluetooth access on and search “UGREEN HiTune Ti” from Bluetooth device list and tap to connect. The voice prompt of “Bluetooth connected” indicates that connection is established.

  5. Auto Reconnection Take out earbuds and they will reconnect to the latest paired one automatically.
    Bluetooth Connection

  6. Mono Mode
    Both left and right earbuds can be used individually. In Mono mode, take out only one earbud from the charging case and its indicator blinks blue and white. Find “UGREEN HiTune Ti” from Bluetooth device list and tap to connect.

  7. Factory Reset
    If one or both of earbuds become completely unresponsive or can not pair or connect successfully, please try the following factory reset steps:
    Step 1: Delete “UGREEN HiTune Tl” information from Bluetooth device list on your smartphone.
    Step 2: Return earbuds to the charging case, press and hold the button on the charging case until LED indicators flash blue and white for 3 times.

  8. Abnormal Connection

  9. Unavailable Bluetooth distance: The maximum wireless operating range is 10m. If you exceed the range, the earbuds will disconnect from your smartphone automatically. The connection will be re-established once you re-enter an available range within 2 minutes, or you could reconnect to your smartphone following “2. Bluetooth Connection” after 2 minutes.

  10. Connection timed out: If earbuds are not connected to any device within 5 minutes, they will automatically turn off.

Touchpad control (same control in L/R)

Music Playback

L/R X 1 Play/Pause
 R X 3 Next Track
L X 3 Previous Track
R X 2 Volume Up
L X 2 Volume Down

EQ switch

R 2s
Press and hold the Touchpad on R-earbud for 2 seconds to switch to Normal mode or Super Bass mode until a voice prompt of “Dong”.

Making Calls

L/R X 1 Answer/End a Cal
L/R 2s Decline a call

Activating voice assistant

L 2s
Press and hold the touchpad on L-earbud for 2 seconds until a voice prompt of “Dong”.

Earbuds chargimg

Earbuds Battery Level & Charging

  1. Battery level: You can check the earbuds battery level following the battery display on the top right corner of your phone screen (smartphone should support the function ).

  2. Charging status:
    Return earbuds to the charging case then it begins charging. No LED indicators of earbuds light up yet the LED indicator of the charging case shows a pulsing white until fully charged.

  3. Low battery signs:
    When the earbuds battery level is at 10% (still can be used for around 30 minutes), the voice prompt will be given every 4 minutes until power off.

Charging Case Battery Level & Charging

  1. Charge the case:
    Use standard 5V/1A adapter and provided USB-C cable to charge the case.

  2. Charging case battery level Open the charging case and the LED indicator show the current battery level for 3 seconds

  3. Ultra-low battery level:
    lower than 5%, LED indicator fast blinking red for 3 seconds. Please charge the case in time.

  4. Low battery level:
    lower than 30%, LED indicator slow blinking red for 3 seconds. The charging case still can be used to charge earbuds once.

  5. Fully battery level:
    larger than 30%, LED indicator slow blinking white for 3 seconds. The charging case is ready for discharge.

  6. The LED indicator of the charging case glows solid white during the charging process. It will turn off when fully charged.

Earbuds voice prompts status

Status Voice Prompts
Power on Power on
Pairing Pairing
Bluetooth connected Bluetooth connected
Activating voice assistant Dong
Bluetooth disconnected Bluetooth disconnected
Battery low Battery low
EQ switch Normal mode/SuperBass mode
Power off Power off

Earbuds Indicators Status

Status LED Indicator
Power on Solid blue for 1 second and turn off
Charging Charging case: pulsing white until fully charged; Earbuds: no LED

indicators display
L/R earbuds connection| Fast blinking blue
Pairing| Blue & White alternate blinking
Using| No LED indicators display
Power off| Solid white for 1 second and turn off

Charging Case Indicators Status

Status LED indicator
Charging Solid white until fully charged
Low battery Blinks red for 3 seconds (lower than 30%)
Error Fast blinking red until errors are removed

FAQ

What should I do if there are connection and pairing issues?

  1. Please make sure the earbuds or your smartphone is not
    connected to any other devices;

  2. Turn the Bluetooth access on your smartphone off and then re-open it;

  3. Delete the “UGREEN HiTune Ti” pairing information from the Bluetooth device list on your smartphone and re-connect again;

  4. Open the charging case and make sure that earbuds are on. Press and hold the reset button on the charging case for 3 seconds to establish a mandatory connection.

  5. If the previous steps are unable to solve problems, please place the earbuds in the charging case, then press and hold the reset button on the charging case for 10 seconds until the LED indicators of earbuds blinking blue and white for 3 times, indicating a complete factory reset operation.

Warnings

  • This product has built-in Lithium battery. Do not disassemble, crush, squeeze or dispose of in fire.
  • Stop using if the earbuds is inflated.
  • Do not expose the product to excessive temperature.
  • Stop using if the earbuds is submerged.

Whats in the Box

HiTune T1 True Wireless Earbuds

Silicone Ear lips {XS/S/M/L}

Charging Case

USB-C Charging Cable

User Manual

Important WEE information

| This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.

Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

For professional users in the European Union

If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.

For disposal in countries outside of the European Union This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

---|---

WARRANTY INFORMATION

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.

CONTACT US

FOR AMAZON MARKETPLACES

NORTH AMERICA
US: support.us@ugreen.com
mx: support.mniougreen.com
CA: support.ca@ugreen.com

EUROPE
UK: support.uk@ugreen.com
FR: support.fr@ugreen.com
IT: support.it@ugreen.com
DE: support.de@ugreen.com
ES: support.es@ugreen.com

ASIA PACIFIC
JP: support.jp@ugreen.com
AU: support.au@ugreen.com

MIDDLE EAST
UAE: support-uae@ugreen.com
KSA: support-ksa@ugreen.com

MORE SALES CHANNELS
ALIEXPRESS: aliexpress.support@ugreen.com
LAZADA: lazada.support@ugreen.com
EBAY: ebay.support@ugreen.com
SHOPEE: shopee.support@ugreen.com
WHOLESALE BUSINESS: partner@ugreen.com

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

Learn more about the EU Declaration of Conformity: https://www.ugreen.com/download/

UGREEN GROUP LIMITED

www.ugreen.com
support@ugreen.com
+86-755-28066530
@ugreen.fans
@ugreen_official
@Ugreen_Official
Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China

UGREEN is a registered trademark of Ugreen Group Limited. All rights reserved.

Icon
FCC ID: 2AQI5-WS111

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals