INKBIRD ISC-007BW Smoker Controller Instruction Manual
- June 5, 2024
- INKBIRD
Table of Contents
INKBIRD ISC-007BW Smoker Controller
Introduction
Description
Press the knob to enter menu or confirm the selection. Turn the knob to change
between selections. Hold the knob to exit the menu page and back to home
screen. Hold the knob to pause the fan before opening the lid.
Item List
- Smoker Controller*1
- Power Plug*1
- Probe*3
- Blast Pipe*1
- Damper*1
Basic Operation
Main Page
- P1: 210 T: 225
- P2: 130 F: 10
- P3: 95 01:22
Home Screen
- P1:Current Grill Temp
- P2: Food Temp
- P3: Food Temp
Place the smoker controller on a stable and firm surface. Let the controller gradually increase the temperature, it will take 30-45 minutes to stabilize the grill temperature.
Menu Setting
Click the Knob to enter Main Menu.
- BBQ
- Manual Fan
- Set Alert
- Reset
Select “Reset” from the main menu to reset the current running mode.
BBQ
-
Select “BBQ” from the Main Menu, and click to enter.
-
Rotate the knob to set a target temperature, then click the knob to confirm the target value, the controller will back to main interface and display BBQ status.
SET TEMP 200 -
The maximum fan power is limited to 70%on smaller grills.
Please set the fan, the temperature alarm, the temperature unit, the furnace size manually according to the above operations.
Specification
- Model: ISC-007BW
- Size: 11.42in8.66in5.51in
- Weight of the Controller: 6.84oz/194g
- Input Voltage: DC 12V/2A
- Short Time Measurement Range: from 0℃ to 300℃(32℉~572℉)
- Continuous Monitoring Range: from 0℃ to 250℃(32℉~482℉)
- Temperature Accuracy: ±1℃/±1.8℉
- Calibration: ±12℉/±12℃
- Connection Methods: support Wi-Fi connection and Bluetooth connection
- Type of Wi-Fi Network: 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n)
- Maximum Bluetooth Connection Distance: 164ft(the distance will be shorter if there are interferences).
- Waterproof: Not waterproof
- Warranty: 1 year
Note: If you choose Wi-Fi connection, the chart data will be saved in the server, if you choose Bluetooth connection, the chart data will be saved into local storage of the device (the local storage can store up to 3 days of data)
Wireless Connection
Get the Inkbird Pro app for your phone
Get the Inkbird Pro app from Google Play or App Store to download it for free,
or you can scan the QR code to download it directly. Scan QR code to download
Account Registration
Register before using the Inkbird Pro app. Select your Country/Region, enter
your e-mail, a verification code will be sent to your mailbox, enter it to
confirm your identity and the registration is done.
Note: If you have registered an account before, just log indirectly. The
device only supports a 2.4GHz Wi-Fi router.
Wi-Fi Connection
Connect the smoker controller to your phone in Fast Flash Mode
- Plug in the smoker controller, the controller will be turned on automatically.
- Open the app and click “+” to start the connection, choose ISC-007BW from the device list.
- Choose Fast Flash mode and make sure that the smoker controller is in Fast Flash mode.
- Choose a preferred Wi-Fi network and enter the password to connect.
- Wait for a few seconds and put the smoker as much as close to your phone while pairing
- Pairing Success!
Connect the smoker controller to your phone in AP mode
We recommend using Fast Flash mode to connect the smoker to the phone. If you
cannot use this method to succeed, please try AP Mode(Slow Flashing mode).
Press and hold the button for seconds to switch to AP mode, the Wi-Fi icon
flashes slowly in AP mode.
- Plug in the smoker controller, the smoker controller will be turned on automatically.
- Open the app and click “+” to start the connection, choose ISC-007BW from the device list.
- Confirm the Wi-Fi icon of the smoker controller is blinking slowly and choose Slow Flash mode, click “Next step” to start the connection.
- Choose a preferred Wi-Fi network and enter the password, then click “Confirm” to go to the next step.
- Enter into your phone’s WLAN interface and connect to the “SmartLife XXXX” Wi-Fi network without typing in the password. Return to the app and confirm that the network has been successfully connected.
- Wait for a few seconds and put the smoker as much as close to your phone while pairing.
- Pairing Success!
Note:
- Please let the app access Location Services when connecting the smoker with your phone for the first time. You can choose Allow While Using App if you worried about privacy.
- The Android System phones need GPS to work properly, please turn on the GPS on your phone.
Wi-Fi Reset
Press and hold the “Wi-Fi” button for 5 seconds to reset the Wi-Fi, then
follow the guide to pair the device with your phone.
Bluetooth Connection
- Plug in the smoker controller and the controller will be turned on automatically.
- Turn on your Bluetooth, click “Next step”to start the connection.
- Wait for a few seconds and put the smoker as much as close to your phone while pairing.
- Pairing Success.
Note: Please turn on GPS on your Android phone as Google Play requires it to work fully. Once the device is successfully paired with your phone, you don’t need to pair it again unless you change your phone.
Main Interface of the Smoker Controller on Inkbird Pro
Precautions
The maximum temperature for short time measurement is 300℃/572℉ and the
maximum temperature for long time measurement is 250℃/482℉, the probe and the
metal wire will be burned out if the temperature go beyond the maximum number.
Do not put probes or metal wire into fire or contact the heating tube
directly. Do not put probes or the metal wire into water, it may lead to
inaccurate measurements. Do not press probes or the metal wire too hard, it
may damage the plastic film of the wire and lead to a short circuit. Please
take off the silicon case before using the probe.
FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
INKBIRD TECH.C.L
Support@inkbird.com
www.inkbird.com
Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang,
Luohu District, Shenzhen, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>