Superdanny QK1260-U3W Surge-Protected Power Tower with Wireless Charge and USB Ports User Manual

QK1260-U3W Surge-Protected Power Tower with Wireless Charge and USB Ports
User Manual

Thank you for purchasing this surge-protected power tower with wireless charger and USB ports. Please read this user manual carefully before using the product and keep it for future reference. Failing to comply with the instructions and warnings herein may damage the power tower and connected devices, and cause electric shocks and possible electrical fires, for which you shall assume all the responsibilities. We are constantly working at building a better living with the products and services we create. Should you ever experience any issues with your new product, please feel free to contact our helpful customer service team by sending us a buyer-seller message.

PACKAGE INCLUDING

• 1 Power Tower • 1 User Manual

PRODUCT DIAGRAM

(Taking the 3-layer for example)

*Note:

1. iPhone 12 and other Qi-enabled models with the Alignment magnet feature can be attached to the wireless charger.
2. Please check the INDICATOR STATUS for wireless charging indication.
3. The overload reset button pops up to be flush with the tower bottom when the power tower is overloaded (kI3A). Please unplug all connected devices and wait a few minutes, then press it down to reset the power tower.

SPECIFICATIONS

2-Layer: 4 USBs. Max 3.4A / 17W Shared 3-Layer. 6 USBs. Max 4.8A / 24W Shared
Wireless Charging Output| 15W
Surge Protection Joules| 1050J
Cord| 6.5ft
Casing material| Polycarbonate (PC)
Cable Material| Copper. Polyvinyl Chloride (PVC)
Fire-Retardant Rating| UL94 V-0,1382°F
Certifications| FCC, RoHS

*Note: The rated power of this tower is 1625W (13×125=1625) under US/CA voltage (110V•125V). If this power tower is used in other countries and regions with proper plug adapters, its rated power may vary according to the local voltage (e.g. 2860W/220V, 3120W/240V).

WARNINGS

• DO NOT use the power tower in wet or humid places or operate it with wet hands. Doing so may lead to an electrical shock and/or even electrical fires.
• DO NOT use the power tower near fire or any heat-emitting appliances like oil/electric heaters.
• DO NOT overload the power tower’s AC outlets. Their rated power is 1625W under US/CA voltage (110V-125V), please check the combined wattage of the appliances before plugging them into the AC outlets.
• DO NOT overload the power tower’s USB ports. When the connected devices are drawing more than the maximum output from all the USB ports, they will stop working temporarily. Unplug all the overloading devices and wait a few minutes to restore all the USB ports.
• It is NOT suggested to plug high-power appliances such as microwave ovens, hair driers, toasters, or space/water heaters into the power tower. They should be connected to a wall outlet
• The Wireless charger would inevitably have a temperature rise, which is normal and within an acceptable range that would not harm the devices or the wireless charger.
• It is suggested to take off your phone/tablet cases before putting your Qi-enabled devices on the wireless charger and stop running any apps while charging. Doing so may effectively reduce temperature raise on your devices and the wireless
• ALWAYS make sure the power plugs of your devices and that of the power tower are completely plugged into to prevent a possible electric shock/arc.
• Lighting strikes may discharge massive amounts of surges to the power grid, to prevent the power strips surge protection joules (1050J) from depleting quickly, we suggest you unplug the power tower during a lighting storm if it is possible, otherwise the power tower may °sacrifice itself to protect your devices.
• DO NOT use the power tower in enclosed spaces. Doing so may cause a rapid temperature rise and damage the unit.
• DO NOT leave heating appliances plugged into the power tower without being attended to.
• DO NOT connect this power tower to another power tower, or vice versa. All power towers should be connected to the wall outlets directly.
• DO NOT cover the power tower with anything or use it on the bed.
• ALWAYS keep the power tower away from babies and children.
• DO NOT use power towers as a substitute for permanent wiring—they are for temporary use only. If you are relying too much on power towers, we suggest you have more wall outlets
• ALWAYS check the power tower for wear and external Replace power towers regularly as per local electrical safety regulations.
• DO NOT try to disassemble the power tower. Doing so may void any warranty automatically. If you need technical support please contact our helpful customer service team.

SETUP & OPERATION

• Place the power tower on a solid flat surface, and plug the power cord into a 3-wire grounded wall outlet with an output voltage in the range of 110V-240V.

• Press the independent power buttons down with a clear “click’ sound for the layer that needs power, the blue indicators inside the button light up accordingly.

• Plug the appliances in the AC outlets and/or plug the electronics into the USB ports. Make sure they will not overload the power tower’s AC outlets or USB ports.

• Place your Qi-enabled devices facing up on the wireless charger and press down the top independent switch that controls the wireless charger. Make sure their centers are aligned. Slightly adjust the device’s position until the wireless charging starts and the wireless charging indicator turns green from red.
  Note: If Charging does not occur, adjust the phone so its receiver can be detected. Please note that different model phones have their receivers in different positions.
  

• Unplug your devices or turn off the power buttons when they are not in use for a long time.

Notes:

• Do not connect the power tower to an un-grounded wall outlet.
• Plugging & unplugging the devices with their own switches turned off could effectively reduce sparking.
• To find out whether your phone or tablet is compatible with wireless charging, please refer to its website or user manual, or contact our helpful customer service by sending us a buyer-seller message.
• Unplug the power tower and the connected devices before you pull out or retract the cord.

INDICATOR STATUS

| Red| Orson| Blinking Red
---|---|---|---
Wireless
charging Indicagtori| Wireless Charger Power ON| Charging| Metal Interference Detected

TROUBLESHOOTING

Unplug all devices and wait o few minutes, press down the red overload reset button
Wireless charging fails| Metal interference detected (indicator blinks red)| Remove the metal objects including the metal phone case
Device not Qi-enabled| Charge to cable charging instead
Wireless charger damaged
(indicator off)| Contact customer. service for support rf it is within the 1-year warranty
The wireless charger switch is not turned on| Turn on the top layer switch that controls the wireless charger
Device was not placed correctly| Put phone face up with the center
aligned with that of the wireless charger, slightly adjust its position
USB ports not
working or charging slow| Single device requiring more current than 2.4A from a single port| unplug and relocate device(s) to AC outlets with their own adapter (s)
Multiple devices require a higher current than 3.4A/ 4.8A
Some AC outlets not working| The Independent switch was not turned on| Turn on the corresponding switch that controls this layer
Hard to plug-in cords| New outlets are designed tight to prolong their service life| Hold the tower and wiggle in the plugs

Note: If the above troubleshooting does not solve the listed/unlisted problems, please feel free to contact our helpful customer service at service@aracky.com or by sending us a buyer- seller message.

WARRANTY

We back our products with a free 1-year warranty. If there is something wrong with the product you purchase under normal use, please contact us within the warranty period for a solution.
Note: Accident or intentional damage is not included in the warranty coverage.

ABOUT US

As one of ARACKYs core sub-brands, SUPERDANNY is dedicated to providing intelligent universal, and high-speed charging equipment around the world. We satisfy consumers’ various needs for power connections while helping you save space at home and in the workplace.

Scan for Customer support
https://aracky.com/pages/send-us-a-message aracky.com/pages/support
service@aracky.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>