ninjutso Katana Superlight Wireless Professional Gaming Mouse User Guide
- June 5, 2024
- ninjutso
Table of Contents
Katana Superlight
INFORMATION GUIDE
How to Change DPI and Report Rate:
Katana Superlight is designed to be plug-n-play. You can change the DPI value by pressing the DPI button. Pressing two side buttons together for three seconds allows you to change the report rate. The value and indicator status of both settings are as below:
DPI:
|
Hz:
---|---
400| | 125Hz|
800| | 500Hz|
1600| | 1000Hz|
3200|
LED Indicator Status
|
Battery Status:
Flashes| | <10%
Flashes| | Charging
Stays| | Full
For more advanced settings such as macros, profile, DPI, power management, etc., please download the software from https://ninjutso.com/pages/download
Warranty:
For any products or parts that become defective within one year from the date
of purchase, you may send back the product and request for warranty. Purchase
evidence, such as receipt, order number, and such, and proof of the issue,
like pictures, videos, and such, have to be provided for redeeming the
warranty.
Warranty only covers defects of parts or products caused by mis-manufacturing
of functionality. It does not cover regular wear and tear, including but not
limited to breakage due to abuse, water damage, improper usage, etc. The
warranty expires if the product is opened without permission from Ninjutsu.
To redeem the warranty, please contact the retailer where you purchased from
or email us at support@ninjutso.com.
Federal Communitcation Commision Interference Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
WEEE
This product must not be disposed of with your other household waste or
treated in compliance with the local regulations contact your local city
office, your household waste disposal service, or the shop where you purchased
the product.
Europe -EU Declaration of Conformity
Hereby, Poetry Society Technology Co., Ltd. declares that the equipment is
in compliance with directive RoHS 2.0(2015/863/EU), EMC Directive(2014/30/EU),
and LVD(2014/35/EU) which are issued by the Commission of the European
Community.
Poetry Society Technology Co., Ltd. hereby confirms, to date, based on the
feedback from our supplier indicates that our products shipping to EU
territoty comply with REACH(Registration, Evaluation, Authorization, and
Restriction of Chemicals – (EC)1907/2006) compliance program.
We are fully committed to offering REACH compliance on the products and
posting accurate REACH compliance status for the all of products.