skymee AI-B20 Smart Feeder AI Instruction Manual

Smart Feeder
Al AI-B20

Material list

Component Description

Make sure that the position of the feeder is not moved anymore, and use double-sided adhesive tape to fix it 3M 3M 3M A 3M 3M 3M 3M 3M 3M 3N

Role of the protective cover

1. Prevent the pet from biting the discharging door
2. Prevent the infrared detection of the equipment from being disturbed by infrared light in sunlight or strong light.

Assembly Instruction

1. Turn it to left by 90°
2. Align the mounting mark location
3. 3stable foot pedestals at the bottom of the main engine to replace non—slip MATS (optional installation)
4. Install the protective A cv cover caresroncing er position of the screw hole and turning the screw by hand
5. Install the food bowl and turn the screws by hand
6. Put the food incorrect direction and close the surface cover

Instructions for dismantling grain bin

1. Open the cover of the grain bin and lift the fixed needle column in the grain bin by hand
2. When the fixed needle column is lifted up, the grain bin can be removed by rotating the grain bin 90° to the left while the main engine is stabilized

Description of status indicator lights

Powered by the external power supply
Red light: Slowly flashing for no food or device fault Quick flashing for no food
Blue light: Slowly flashing for configurable state Quickly flashing for networking Normally on for successful connection Blue light on for 15s: Powered on and starting
Powered by a built-in battery
Red light:
Normally on for normal power supply by battery Flashing for food clogging, device fault, battery low
Attentions

1. Minimum requirements for equipment use
   1.1 Equipment end web requirement In the case of standard resolution, the uplink bandwidth speed is at least 512kbps. In the case of high resolution, the uplink bandwidth speed is at least 1 Mbps. 1.2 append web: The uplink bandwidth speed is at least 512kbps for standard resolution and at least 1Mkbps for high resolution.

2. Please do not allow anything other than pet food to fall into the material pail, otherwise, the equipment will become abnormal for operation or even a pet safety problem may arise. The dog food diameter is 515MM.

3. Do not allow pets to bite the electric wire, which may lead to death due to electric shock.

4. Please ensure that any child uses this equipment under the guidance of an adult.

5. Do not touch the food outlet in food discharging.

Troubleshooting

1. If the connection fails when hearing “Doo” in reading the 2D code for adding equipment, check if the Wi-Fi password is connected and connect again, or change to equipment hot point for equipment addition. (See if the equipment indicator lamp is Blue and blinks. If the Blue lamp is on constantly, press and hold the equipment Reset hole. On hearing “Doo” after 5 seconds, have the equipment resume to the addition state).
2. In case of failing to read the 2D code and hear “Doo” in adding equipment, check if the equipment indicator lamp is Blue and blinks. If the Blue lamp Is on constantly, It indicates that there has been an equipment addition. You can press and hold the equipment Reset hole. On hearing ‘too” after 5 seconds, have the equipment resume to the additional state. Just connect again.
3. In case of any error in equipment addition, you may have used 5G Wi-Fi for binding. Wireless Wi-Fi supports the 2.4GHz frequency band only. 5G Wi-Fi is not supported temporarily. Please adjust for 2.4G Wi-Fi.
4. The real-time pictures are not smooth. Confirm if the web uploading and downloading rates meet the equipment work requirements. If the web rate is too low, you may choose a smooth mode.
5. The equipment displays offline. Check if the web is normal.
6. That the equipment’s red lamp is on indicates that there is no food or the equipment is abnormal.
7. When the equipment does not work or the power is not supplied normally, check if the rated working voltage is 5V and the rated power is 10W/2000mA.

Download and install the app

https://itunes.apple.com/us/app/skymee/id1364910801?mt=8

|

https://play.google.com/store/apps/details?id=cn.P2PPetCam.www.meico

|

https://www.skymeesound.com/app/Skymee/downloadguide/download.html

The mobile phone scans the OR code or logs on to the website to download and install the app.https://itunes.apple.com/us/app/skymee/id1364910801?mt=8

For Android users,enter Google play For to search “skymee” and download.

|

For iphone users, enter App store to search “skymee” and download.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party.

Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>