ALLPOWERS AP-SS-009 Monster X Pro Portable Power Station User Manual

Portable Power Station
**Model: AP -SS -009- PRO
(Monster X Pro )

**

1. Keep Monster %Pro and the accessories dry and keep them away from the heat sources.
2. Neverdisassembleopuncture, shock, crash, shortcircuit or incinerate.
3. Recycle and dispose of Monster %Pro follow the local regulation.
4. Pay attention to the IMPORTANT SAFETY INSTRUCTIONS on the manual before operating.
5. Disabled children should use Monster %Pro under the protection of the supervisor.
   The products and materials described in this manual wilt be changed at any time due to technical upgrades. we reserve the right to change the contents of this manual without information in advance.

Thanks and congratulations on your solar generate’s purchase. a plug-and-play backup power station for powering outdoors. The Monster )( Pre will be partially charged in accordance with lithium-Ion shipping regulations. Before you read the rest of the manual, please plug It Into the wall and charge it, Tull, with the AC charging cable.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE using this product. you must read this instruction to fully understand the function of the product In particular, you should follow this important SAFETY INSTRUCTION MANUAL. Improper operation may cause product failure. and in serious cases may cause safety issues. Suggest the user read this manual and understand the important safety precautions (Including safety guidelines, safety terms during use and operation. day maintenance terms. etc.). Otherwise. we WILL NOT RESPONSIBLE for the damage caused by the wrong method.
Special Note: check the voltage and power on your electronic device to ensure Me compatibility before connecting your devices. (Before using the output port. please make sure that the rated Perrot or your electronic device does not exceed 2400W. and the peak power does not exceed 4000W. Normally. users can find the relevant power parameters On the parameter label.

1.  if the product needs maintenance or repair. please send this product to a qualified service provider. DO NOT disassemble or modify any part of this product without our guidance. Wrong assembly may cause 4:resident such as fire or electric shock. Unauthorized assembly will Invalidate your warranty.
2. TMS product has no waterproof function. Please avoid using 11 humid environments. DO NOT pour any liquid ‘alto this product or immerse this product in any liquid.
3. If you find abnormal phenomena such as swelling or leakage of the Internal battery. please contact our after-sales team In time for further assistance.
4. D0 NOT install or remove any internal battery from this product.
5. Please avoid using this product in the presence of strong electromagnetic or electrostatic interference, otherwise, it may cause the failure of the battery control circuit board.
6. If the product accidentally falls into the water during use, please DO NOT directly salvage it by hand. Use insulating materials to take it out of the water. Turn off the power immediately and place it in a safe open area. Keep a safe distance from the product. Contact our after-sales team for further solutions. DO NOT use this product again unless you receive operating instructions from us.
7. D0 does NOT use this product with damaged wires, plugs, etc.
8. Charge the generator in a well-ventilated place, and DO NOT obstruct air circulation.
9. D0 NOT drop, place heavy objects on it or hit the product. DO NOT step on or sit on the product.
10. DO NOT put your fingers, palms, or any part of your body into this product, especially to avoid storing this product with coins, jewelry, keys, and other metal objects to avoid short circuits.
11. D0 NOT throw this product into fire or heat it; DO NOT use or store it in a high-temperature place (near the fire source, stove, the car during the hot season, or under sunlight directly), otherwise, it may cause overheating issue, or on fire, explosion or malfunction. (When using solar panels for charging, DO NOT cover this product with blankets or clothing, and place it in a cool and ventilated place).
12. This product can be widely used. It will need regular simple cleaning and maintenance. You can wipe it with a dry non-abrasive cloth. If you need a deep clean, we recommend you choose a neutral cleaner for mobile phone and computer displays.
13. If leaks inside the product and adheres to the skin or clothing, please wash it with water immediately. If it accidentally splashes into the eyes, DO NOT rub them, rinse with water, and do the medical attention immediately.
14. D0 does NOT use flammable gas such as insecticide spray near this product, it may cause a fire.
15. D0 NOT use this product with a wet hand or wipe it with a wet cloth, which may cause electric shock.

Product List

Get to Know Your Generator

1. 4 x Universal AC Output Sockets Different countries may require different voltage and frequency from AC sources.
2. 1x Car Port Outlet
3. 2 x USB-C Outputs
4. 4 x USB-A Outputs (QC3.0 Quick Charging)
5. 1 x 30AAC output port
6. Solar input Xt60
7. LCD Display
8. Wake button: When the AC/DC mode is off, the power station will automatically enter the sleep state after 12 hours. When the DC mode is not turned off and there is no device output, the power station will automatically enter the sleep state after 24 hours. After entering the sleep state, long-press the wake button for 3 seconds to restart the power station.
9. Master for AC Mode: when it is powered on, press and hold for 3 seconds and you will see the AC icon light up which means AC power is ready for use, in the meantime, a cooling fan will start running. For some countries, you may need to switch between 50/60Hz on APP after the AC mode is on, please ensure it is on no-load condition.
10. DC/Bluetooth mode switch key: Short press the DC key to turn on or off the DC output mode, and control 4 USB-A and 2 USB-C output ports at the same time. When it is ON, press 3 seconds until you see the icon on the LCD, you will enter/exit Bluetooth Mode, scan OR code to download our APP, and do the registration, you can communicate it with your Phone via Bluetooth from now on.

Real-time LCD Displays

⁕ Battery Segments(Five battery segments, 20% of battery for each segment.) ‘
⁕ Battery Percentage
⁕ In/Out Power (Here shows the power in or power out, or “power in-power our if you charge and discharge at the same time) ‘
⁕ 50/60Hz(For some countries, you may need to switch between 50/60Hz on APP after the AC mode is on.)
⁕ Time remaining (only estimated time. The remaining time will vary from the appliances you use) ‘
⁕ Overload Alarm: when the power output from any DC or AC socket and the carport exceeds the maximum power output, the overloaded alarm will start to blink as a warning.  (Remove the device and restart the Monster X to resume operation. )
 ⁕ Over-temperature Alarm: the system will be in a safe mode if the AC inverter temperature goes up to 95°C, AC outlets will be shut down automatically, please wait for a few minutes till the system cools down before restarting it.
⁕ AC Output Icon: when power on, press and hold the AC masterfor3 seconds to enable AC outlets, the AC icon will come on. (Be sure to turn off AC mode by pressing and holding the AC masterfor3 seconds when you finish each time, then remove the cord from AC ports, otherwise, it causes approx.10-15W power loss. ) ‘
⁕ USB-C output mode icon: when using the USB -C port to charge your devices, the icon of USB-C on the display lights up. The icon will disappear when you unplug the cord from the USB-C port, for USB-C 1, make sure the DC master is switched on.
** ⁕ Output icons for USB-A ports and 12V Car Port: a short press is needed to turn on/off the
⁕** DC outputs and you will see both USB-A and 12V car port icons light up on LCD.
⁕ ‘Bluetooth Mode (Bluetooth Model: MS485F2 4.0 BLE )
⁕ Once the fan is operating, this icon lights up.

Warm Tips:

• ToenableAC outputs, we need to ensure the battery never drops below 5%, this is designed purposefully to help prolong the battery life, so your Monster %Pro is always ready for use when you need it.
• To saveenergyloss, please exit all modes and turn off the LCO display after every use. When Power is Off, the microelectronics control circuit runs into a standby mode, and the battery dropdown a little if it is not in use for hall year.

APP
It turns green when Bluetooth is successfully connected.
Turn on Bluetooth on your phone and make sure Location Service is on.
Press to light up the LCO, then pressand hold for 3 seconds to enable Bluetooth

Click on the top-right Phone icon from APP and select” ALLPOWERS 52000″ from the pairing list. Your devices can pair automatically while you pair the same Bluetooth device for the second time.

In normal use, the effective range for Bluetooth is 10-15M, but the surroundings indoor can vary a lot as obstacles like a concrete wall will attenuate the signal and the effective range may be drastically reduced. We suggest trying it outdoor, in an open field.

How can I recharge my Monster X?

1. Charging it from wall sockets: there is an AC input socket behind for charging, please do use the AC charging cable we provided, any non-original one might shorten its service life. (Up to 1500W input power, it will take approx. 1-2hours to full charged.)
   Note: we also can charge it via the front XT60 input port with a certificated third-party DC power adapter as long as the voltage and current( 18-70y 18A Max) comply with the specifications of the MonsterX Pro.(Up to 650W input power, approx.3-4hours to be fully charged.)

2. To charge MonsterX Pro Pro Pro through solar photovoltaic modules, it is recommended to use ALLPOWERS solar photovoltaic modules, connected to the front-end XT60 solar input port for charging, the maximum input power is 650W, and the solar charging effect needs to consider the weather conditions. The average daytime illumination time is 7-8 hours, and the effective illumination time maybe only hours. The user’s finality average light Met m8y Only be about 60% of the nominal.

3. UPS descriptionUPS(umnteetupoblePown System) is mainly used to provide uninterrupted Dowel townie equipment lint recitaresNeh power stability. VthenMonster X PIO ISCOMEted 10 wallOuntl via theACchargingcablo,thoUPSfunctionlsamtomaticallyorablad.At Mistime. tho devices connected to monster )(Pro are under the protection of UPS uninterruptible power supply. When the wall outlet is power 011.theUPS will ensure the COnneCtiOn The device NIS continuouS end stable power supply, so as to avoid political damage caused try Irtstantanoous power failure. and loss of document data.
   Notice: I.Monster Pm itself Kin energy stooge dueling mode Munn Is connected to wall outlet through theACchargingabk, but when the battery full power 100%, the battery charging function will automatically stop end only the UPS function wilt be aaaa linked. IhistIfectively avoids healthy and battery service We issue when the batten( IS atwris in a (harlentate.

4. 1n countries and regions where the theACvoltege is 110V or 100V when using the UPS (unction (when the AC charging line is connected to the power station), the maximum constant power of the AC output port connected to the device is 1500W, and the overload protection will stop operation If the energy storage exceeds 1500W. But when It Is not LI OS function, It can normally support constant power output up to 2400W.

Specifications:

Battery
Lithium-Lion batteries Capacity:4415405mM 3.7V (1500Wh) Weight: approx. 14.5kg Size: VS x 245 x 250mm/14,76 x9.64×9.84 inch

Input
AC Input: 1500W(Max.100-240Y) Solar Input: 650W11840V,111A Max .1
Output
ACOutput:continuous 2400W, surged 4000W(Pure Sine Wave) 13Y Car Port: 13V10A USEIC :5V5A0VSA/12VSAfl5VSA/20V5A(OD 100W Max .) USB•fUSB-3:5V3At9V2A/11V1.SA USE1-2/USB-1:5V3A/9V2A/12V1.5A USB1•USB3/US112•USB4: SV2.4A•SV2.4A
Temperature
Wor king temperature:-20-4SCC) Temperature Over temperature charging protection:55’C-45m for long-term storage, please do avoid storing outside, or In damp environments.

Protections
Over-current /Under-voltage/Over-charge/Over-load/Short-clrcult /Over-heating protection

Note: USBIAIS133 supports QC 3.0 fast-charging standard which means a single port allows you to power up to 24W at maximum for devices, but they will degrade to a normal output level of 5W2.4A at maximum if deliver power for dual devices at the same time.

Storage and Maintenance:

1. Due to the chemical chadctemtics of the battery, the battery performance may somewhat vary from environment to environment such as cold weather or overheating. Please always use it at room temperature(-20-.45t).
2. Continuoustydischarging the battery below s-and storing it with a low battery may reduce its serviceable life. Recommended to always leave it at at least 2046capacity unused. (Suggest to fully recharging it at least onceevery90 days for maintaining the best performance, reliability, and longevity.)
3. Please store your Monster X Pro in a dry environment and do avoid storing it outdoor or in a wet place. Storing Monster X Pro outside, operating it out of the temperature range. which might cause safety issues and reduce the service life..
4. Please handle It carefully and avoid hitting it with sharp objects or knocking heavily on It.

Contact Us

If you have any concerns regarding our products or services, please email us at support@allpowers.com, we will feedback with our assistance within 1 working day Please also advise us by providing a statement of how the failure occurred and the details of the Issue. Websitcwww.iallpowers.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>