Joydeal BLS-YL1 Wireless Control Switch with 30A Relay Instructions
- June 5, 2024
- Joydeal
Table of Contents
Joydeal BLS-YL1 Wireless Control Switch with 30A Relay Instructions
1. About Wireless Control Switch
The product is a wireless remote switch with 30A relay. This switch has a wide range of use, essay to install and easy to use. It lets you turn on or shut off power of household appliances (90V -264 V) such as monitor, printer, speakers and more. It even can be used for industrial equipment or Security equipment(Just wiring and use)
2. Wiring diagram
3. Technical indicators
Input voltage: 90V-264V
Output current: 30A
RF Working frequency, 433MHz
Range: up to 100 rn in open field
Receiver Sensitivity: -95dbm
Max number or controllers: 16
4. How to pair a new controller
a) Press the button three times, the LED stays solid green
b) Press the ON button once, the LED will blink green three times then stays solid green
c) Press the OFF button to finish the pairing. Now you have successfully added a new controller.
5. How to clear the Memory
Press the button eight times to clear memory then add a new controller again (if you have problem when you add a new controller).
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>