NFORU B18WIFI Wi-Fi LED Ceiling Light User Guide
- June 5, 2024
- NFORU
Table of Contents
MODEL: 618WIFI /1324WIFI /1332WIFI /1318WIFI-S /B24WIFI-S /B32WIFI-S
/BlEIWIFI-D /1324WIFI-D /B32WIFI-D
US 100.120V AC/ EU 220-240V AC 
**** Safety Information
Disconnect the power supply before attempting any work on the unit
- Installing these units involves work on the mains voltage supply; installation must therefore be carried out professionally in accordance with the appliance national wiring regulations and electrical operating conditions.
- The product must be installed by a licensed professional electrician.
- Check all components for damage, do not use: the product if it is damaged.
- To ensure the product can work normally, please use it in the voltage within the range on the lamp label.
- Do not install the unit on (normally) flammable surfaces.
- This light is a non-dimmable product. To avoid failure, please don’t connect it with the dimming controller.
- Do not after or change parts of the lights at will, in case of the accidents such as breakage, fall, electric shock, fire, etc.
Note
- Make sure that the distance between the light and the object being lit is more than 1 meter, so as to avoid high temperature caused by a short distance.
- Safety Class II-This lamp is doubly insulated and may not be wired to a protective conductor.
- Caution, risk of electric shock.
Non-User Replaceable Light Source
The light source contained in this ceiling light shall only be replaced by the manufacturer. or his service agent or a similarly qualified person.
Limitations of Indoor and Outdoor Use
- The mounting position of this light should be able to bear at least 10 times as heavy as the light.
- This light should be used in conditions with sound heat dissipation. The working temperature of it should be less than 45°C. Overhigh working temperature will cause serious lumen depression and affect the lifespan of the light.
PARAMETER
| A- 240x50x240 rnrn 9.45×1.98×9.45 in
B- 258x50x258 nwo 10.16×1.98×10.16 in
C- 286x50x286 nirn 1126×1.98×11.26 in
---|---
****| 100-120V AC 60Hz 220-240V AC 50Hz
| Warm White+Daylight White 2700-6500K
| Wi-Fi
| -25°C – 40°C
PAIRING LED LIGHT WITH”SMART LIFE” App.
NOTE: Then ON/OFF the Smart LED Light three times until the LED Light
starts to flash quickly. which indicates the success of the factory reset.
Step 1: ‘Smart Life’ App. installation. There are 2 options for obtaining
and installing the “Smart Life’ App. on your smart device.
- Scan the OR code on the right
- Search for ‘Smart Life’ in the App. Store or Google Play.
https://smartapp.tuya.com/smartlife
Step 2: Enter the ‘Smart Life- App. and register an account and log in.
If you already have an account for Smart Life App., Please select “Log in with
an existing account.
Note: You will need your -Smart Life App. username and password to pair
with Amazon Alexa and/or Google Assistant.
Step 3. Please turn on the Wi-Fi and Bluetooth before
connecting LED lights to the “Smart Life” APP. Tap the ‘+’ button on the top
right corner to add a device, then tap lighting device” to enter the next
page.
Note: This smart LED Light can only support a 2.4 GHz network and cannot
work with a 5.0 GHz network. Please check if your home network is 2.4 GHz and
make sure that your phone has been connected to your Wi-Fi network. Please
ensure your network is not hidden.
Step 4. How to pair the LED Light.
-
Power on the LED Light.
-
Power on and off it three times quickly until the LED chips flash, it indicates that the floodlight has entered pairing mode.
-
Tap the confirmation button to pair the LED Light.
-
Enter your Wi-Fi password to join your network. Please Note
a. This smart LED Light can only support a 2.4 GHz network and cannot work with a 5.0 GHz network.
b. Please check if your home network is 2.4 GHz and make sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden. -
Wait till it is successfully connected.
Note: If the LED Light is still flashing until the progress map reaches 100%, the pairing fails, and you will need to repeat the previous 4 steps to pair the LED Light.
Step 5. Name the LED Light and tap ‘Done. You will find
the device you’ve named is shown on the App homepage. Tap the device to enter
the setting page.
Note: The name you give to the device will be the name for voice control
on Amazon Alexa or Google Home later. For example, the device is named ‘Smart
LED Light’ in this user guide.
Step C: Enter your account and password of Smart Life
App., tap -Link Now then tap Authorize- on the next page authorize Smart Life
Info to Alexa.
Note: Same account and password as Smart Life App.
Step D: Once your Smart Life account is successfully
connected to Alexa, the following page will pop up. Tap “Done on the top left
corner, then tap -DISCOVER DEVICES’ on the next page.
Step E: Wait a few seconds for Alexa to detect the LED _get from Smart Li
App.. aid you will find the device named ‘Smart LED Light* has been paired to
Alexa App from Smart Life App. After step E is done. you can now control the
get w the Alexa App. on this setting page. A_ slide to manage brightness 5.
tap to turn on-off re aril C. enter to change soars
Try these commands and see what happens Dy asks Alexa
Alexa. turn on ‘device name
Alexa. turn off ‘demo name’
Alexa. set ‘device name” to ‘cow’ Alexa. set -Cevcie name to ‘number’
For example -Alex& tan on Smart LED sugar. ‘Alexa. dim Smart LED Lxgrn to
50’4″ etc.
Note: The device name is the one you 9W to the LED Light on Smart Life
App. In MS use’ glade, ire device s named ‘Smart LED Light’.
GOOGLE ASSISTANT APP
step A: Open your Gone Home App.. tap ‘Home Control’ on the Leh SideBar
page.
Sep B . Tap the button on the bottom right corner to enter the next page.
Step c: Find ‘Smart Lie’ from Ine side oar list.
Step D: Enter your account and password of the Smart Life App., tap NOW.
Men tap ‘Authorize’ on the next page 10 cauterize your Smart Life Account into
to Gouge home
Step E: Yo.; will find that 3oogle Home nos fo-ncl the Rev ce named
‘Smart LEO Light’ on this page.
Try these commands and see what happens by asiong Googe:
ok. Google. turn on ‘device name’
ok, Google. turn of ‘device name’ Google. se: the ‘Wyse name’ to ‘color
ok, Google. set ‘Cellist name’ to -number For example*:
‘ok Google, turn on Smart LEO Light, Mk Google. dim Smart LED Light To 501:
etc. Note: The device name is the one you give to the LEO Ugni on Smart Life
App. In this user guide the deuce is named ‘Smart LEC Light’
INSTALLATION STEPS
Step 1: Pease cut off the power before w rng and install
abon. Take out the saewStA&B) and the bracket.
Step 2: Drill two noes on the wan, tx the metal bracket onto the wall
with pasha expansion nails and screws.
Note: Please estimate and identify the distance and size of the notes
before drilling. and the meal Dracket has to be continually paced.
Step 3: Wiring. For the US: Connect the black line and white: one of the
lights with me Live line and Neutral I-re of main supply respectively.
N: White Neutral line L: Black -ive were For EU: Connect the brown line and
blue i.ne of the light with the Love line and Neutral ]-_ne of main supply
respectively.
N: Blue Neutral:ne L: Brown Live wire Please Note: If your wring ports can not
connect with our existing ports directly, the wire 21 our accessory can be
applied for the connection. Step a: Alter wiring successfully. fix the lamp Dy
directing the slot of ‘amp chassis at the convex edges on the metal bracket.
Then screw on the amp from the side. Turn on the power supply and plug n, the
lamp can work properly.
GENERAL MATTERS FOR ATTENTION
- Trus smart LEO Light can only support a 2.4 Glitz network and cannot work with a 5.0 3142 network. Please check if your name network is 2.4 Gttz and make sure that your phone has been connected to your Wi-Fi network. Please ensure yo..ir network is not hidden.
- If you fail to connect the LED Light wan your Wi-Fi. please check nether your network * is stable and fast. Sow networking speed may result in fair-re of connecting on.
- If you fail to connect the LEO Light wan your Wi-Fi- please ensure your Wi-Fi password is correct. If not, please re-enter the correct password.
- Wi-Fi Connection Issues 11 a router1M-Fi password changes or optional smart devices register with the ‘Smart Life’ App.. a factory reset of the Smart _ED Light s required.
- lf any matters regarding Smart LEO Light connection happen. you can reset tee factory setting of LEO Light, Men re-connect the Smart .10 Light.
FCC Statement
This equipment has been tested and found to comply with the! snits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference to a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. Hunt- wet, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. wh ch can be determined by turning the equairrient off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the rectwing antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment_ This device companies with pal 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enwonmeM. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
plan. fact.rer; re Wier&nen then Sh, Meng Dui To Ke Ji You Xian Gong Si Address: can wan yf id NIO A dong 201 sat glen nai seen gang he Lao Qu then Then. Guang DON 518000. CN [email protected] was. ortfoniltdstorn
EU/REP BeIlaCocool arrived
Petterwoterstrafte 18, 10247. Berlin. Germany
supponaonforuted.com
EU/REP MOH LIGHTING LTD UNIT G25 WATERFRONT STUDIOS
1 DOCK ROAD LONDON UNITED KINGDOM E18 1AH
[email protected]
Made in China