SOONCOR Galaxy Star LED Night Light User Guide
- June 5, 2024
- SOONCOR
Table of Contents
PlayStation Star Lights
User Guide
Disassemble the Lampshade base
Step 1: Turn on the Me remote control when the hems on
Step 2: If the n a battery Wilbert at the bottom ol the remote control, unplug
it lint!
Step 3: Align the remote ambit with the mewing hole on the back of the
product, then you an control the light
Align
the remote control with the product recording hole. otherwise, it will be
invalid
Remote control indicator light uses informed, therefore, the rtnrott COntrol
indicator light is not visible
Bluetooth pai- prepare search for the dev.er -plarirth on” for Stuetcroth pa
ring After purring, you can play music on your phone on a starry night light
Remote Control Button Function
- White light
- Blue light
- Yellow light
- White blue tight
- White yellow light
- Blue yellow light
- White, blue, and yellow
- Automatic color change
http://v.youku.com/v_show/id_XMzk2NjkxODE0MA==.html?spm=a2hzp.8244740.0.0
lampshade install video We hat scan to watch the install video
Lampshade install
Step 1 : Rip doom all the plastic film on the lampshade-
Step 2: fold the lampshade from the smooth side to the rough side
Step 3: Insert the middle and bottom sections of the
Simple blade design Easy to install a lampshade
Step 4: Insert the bottom base at a 45 degree into the lampshade
Step 5 : Fasten the base and the lampshade
| Using a custom LED lamp, the principle of small hole imaging is projected
from the center to the periphery. It is a Platonic dodecahedron design, not a
single facet. The closer the projection is, the sharper it is the farther it
is, the more blurred it is.
---|---
| Use space Suitable for about 12 square meters of space Needs to be used in
an all-black environment Unable to see the effect during the day
---|---
| Use Height Suitable for heights ap to 28ni it here is light around you can’t
see the effect if the distance is too large or too high
-The product is suitable for ordinary household use and is not suitable for living rooms, or halls. foyers, VV, classrooms. etc
Product Accessories
( Remote control Bluetooth three-color version)
Red tights when USB is powered/charged
Fully charged, it lights up in green
single color use time: 12
hours three-color use time: 6 hours
Bluetooth rotating light : 3 hours
Product Name: Playshion Star Lights
Product model: WZXKD-01
Commodity Origin: Guangdong, China
Product packaging: exquisite gift box
Packing size: 13.9’13.9’8.4cm
Shade material: PET
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
FCC ID: 2A4F2-WZXKD-01
Documents / Resources
|
SOONCOR Galaxy Star LED Night
Light
[pdf] User Guide
WZXKD-01, WZXKD01, 2A4F2-WZXKD-01, 2A4F2WZXKD01, Galaxy Star LED Night Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>