Soundcore P2 True Wireless Earbuds User Manual
- June 5, 2024
- Soundcore
Table of Contents
Soundcore P2 True Wireless Earbuds
Product overview
- Make sure that the ear caps face down and put the earbuds into the ear at the angle shown in the picture on the right.
- After putting on the earbuds, gently rotate the earbuds to a comfortable and secure position shown in picture 3 on the right. Now the earbuds are put on correctly!
- Error
demonstration Do not wear the earbuds like the way shown in the picture on the right
First time using
- Tear off the insulating film.
- Put the earbuds into the charging case to charge.
- Take out from case, the indicator will tum to Red and Blue alternately. Warm notice: If the earbuds are not turned on or there is no sound come out, please put them back in the charging case again to make sure that they are in the charging state before taking them out for use (red/blue light flash alternately)
- The indicator of one earbud will go off and another will lash red and blue light alternately. n pairing mode)
- Turn on the Bluetooth function on your phone and search for IP21 and connect it.
Warm notice
Alf indicators of both earbuds keep flashing red and blue, Click either
earbud’s power switch twice. Then the indicator of one earbud will flash red
and blue aternately, another will go off. (in pairing mode) AIf you want to
switch the Bluetooth connection to another device, please disable the
Bluetooth function in the previously connected device OR delete the pairing
name of “P2” from the original device. Then the pairing name of “P2” can be
searched in new device and connected successfully.
Button control
Warm notice
For any single earbud, when it is in standalone mode, you can’t use it to play
the previous song or decrease the volume.
Siri and other Voice Assistant
IOS and part of some Android users can click the left or right power switch four times to turn on the voice assistant.
The voice assistant will be automatically activated depending on different OS in mobile systems.
Restore factory setting
- When the earbud is on with the mobile phone unconnected, click the left and right power switch simultaneously three times quickly. The red and blue lights will be on for 2 seconds and then it will clear its memory and the earbuds will shut down automatically.
- Please delete all paired records on the phone and search again for “P2” on the Bluetooth of mobile phone and reconnect.
Earbuds indicator
Charging case INDICTAOTR
CHARGING CAES
Please use a charger with an output voltage of DC5V/1A to charge the charging case. You can also use a computer USB or other USB interface charger to charge (Must choose a charger certified by a regular manufacturer)
Specifications
Signal transmission distance is shown below:
Notice:
1f the charging case is out of power, it may cause the earbuds to fail to shut
down and remain connected to the phone even when they are placed in the
charging case. So please remember to charge the charging case in time.
Attentions
Please make sure that the products are dry. If there is a water droplet on the surface, please wipe it with a dry cloth before putting them back into the charging case to avoid damaging the device.
- Do not use corrosive liquid to clean this product.
- If it comes into contact with chemicals, please rub it with a damp cloth wet with clean water.
- Do not use this product under extreme circumstances for temperatures below -10 degrees Celsius or above 60 degrees Celsius.
- To avoid an explosion, please do not throw this product into fire.
- To avoid scratches, please do not touch the earbuds with sharp objects.
- Do not insert objects into the earbuds, otherwise, it would cause damage to the internal components.
- Do not disassemble the earbud.
- Please keep regular charge to earbuds, don’t leave them to become empty battery status to keep their lifetime.
- Please do not charge products with a power adapter over 2A current. Excessive current may cause the damage to the battery.
Battery Warning!
There is a built-in lithium battery in this product. To avoid explosion, do
NOT expose the product to strong sunlight, fire or throw it into the fire.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>