LARKBIRD WLM Wireless Microphone User Manual

LARKBIRD WLM Wireless Microphone

Introduction

Thank you for choosing Larkbird. Larkbird smart wireless microphone is a professional audio solution provider for sound recording. Plug and play, no App required. Ideal for live streaming, video making, on line teaching, interviews, business presentations and more. A great choice for Vloggers, journalists, filmmakers, TikTok creators, etc.

Functions

1. Case Indicator Light

2. Case Charge Port

3. Microphone Indicator Light

4. Microphone Reset Key

5. Microphone Clip

6. Microphone Charging Contacts

7. Receiver Plug

8. Receiver Indicator Light

9. Receiver Reset Key
   Receiver Charging Contacts

10. @) ( Type-C and Lightning Receivers don’t have to charge contacts because they don’t need recharging.)

NOTE:

1. The indicator light@!® should be faced outward when the microphone/ ; 3.5mm receiver is put back into the charging case, otherwise, it can’t be charged properly.
2. The receiver indicator light® should be faced outward when it’s put back into the charging case, otherwise, there will be no magnetic lock (built-in magnet), and will have wobble inside.

How to Use

NOTE:

• For first-time use, please tear off the insulation sticker at the bottom of the transmitters to allow proper charging.
• A new device may be low on battery. Please fully charge it before using it.

Auto. The microphone is on once out of the case and off once put back into the case. The auto pairing will begin when it’s on. The microphone will be off automatically when failing to pair correctly in 10 minutes.

Step 1. Take out the microphone and it will turn on automatically. Greenlight flashes indicate that microphone is searching for pairing .

Step 2. Plug in the receiver to your phone and it will turn on automatically with its green light on. When the microphone green light stops flashing and stays on, the pairing is completed.

For a video user guide, please visit: www.lark-bird.com/tutorial

Q: Why can’t it work on my Android phone?
A: This device needs an Android OTG function.

1. Make sure your phone supports OTG.
2. The mobile phone OTG function is on by default. If you need to manually enable OTG, please refer to the following steps.

If you fail to enable OTG, please contact your phone manufacturer for support.
For more questions, please contact Lark bird customer team for support. We are always here for you. support@lark-bird.com

Incompatible Models (includes but not limited to)

Samsung

| Galaxy C9pro
---|---
Galaxy Note8
Galaxy S8
W2018
Galaxy A50 / A50S
Galaxy A60 / A60S
Galaxy M30s
Galaxy A6s

OnePlus

| OnePlus 3T
OnePlus ST
OnePlus 6
OnePlus 6T
OnePlus ST

Vivo

| X60
X60 pro
Sony| XPERIA series

OPPO

| OPPO_REALME _Q2
---|---
OPPO_REALME_X2
OPPO_REALME_V5
OPPO_REALME_Q
OPPO_REALME_V11
OPPO_REALME_V3
OPPO_REALME_X50

HUAWEI

| Mate20 Pro
Nova 4G
Nova 2Plus
Nova 2S
Nova 2
Xiaomi| Xiaomi CC9 Pro

LG

| LG G5SE
LGV20
|

Light Indicators

Charging Case

| ****

Battery Percentage

Remaining battery check: 1 Os of light indicating when opening or closing _ _the/id.__

| Red light flashes| Battery: 0%-36%
Blue light| Battery: 36%-75%
Greenlight| Battery: 75%-100%

Case Charging

| Red light| Charging
Lights off| Charging completed

Microphone Charging

| Slow flashes of

one/more colors

| ****

Charging

Lights off| Charging completed

Microphone

Transmitter

| Battery| Slow blue light flashes| Battery below 20%

Working Status

| Slow green light flashes| ****

Pairing

Green light| Pairing completed

3.5mm Receiver

| ****

Battery

| Slow blue light flashes| ****

Battery below 20%

Working Status

| Slow green light flashes| ****

Pairing

Greenlight| Pairing completed

Lightning/Type-C

Receiver

| ****

Working Status

| Slow green light flashes| ****

Pairing

Greenlight

| ****

Pairing completed

Note:  Lightning/Type-C Receiver doesn’t need to recharge and is ready to use once plugged in.

Troubleshooting Guide

Microphone

Indicator

Light Malfunction

| ****

Insulation Sticker

| Remove the insulation sticker at the bottom of the microphone and re- insert it into the charging case. Close and reopen the case.

System Crash

| Hold press the reset key on the microphone with a pin for 3s to reboot.

Dead Battery

| Put the microphone in the charging case to make sure it’s charged (Charging microphone, the case indicator light flashes green/blue ; charging completed, the case indicator light will be off).

Receiver Indicator

Light Malfunction

| ****

Bad Contact

| Unplug the receiver and replug again. Make sure the receiver is in good contact with your phone.

System Crash

| Keep the receiver plugged in your phone and hold press its reset key with a pin for 3s to reboot.

Microphone Connection Failure

| ****

OTG Function

| Make sure your phone supports OTG function. For certain phone models, you may need to manually enable this function.

System Crash

| Hold press the reset keys on all microphones and the receiver with a pin for 3s to reboot.

Pairing Failure

| ****

Quick press the reset keys on all microphones and the receiver 2 times respectively to clear pairing. Try to reconnect again.

(NOTE: CD. Do the 2-time quick press within 1s; @. Keep the receiver plugged in your phone during the process. )

Service

Get a 6-Month Extended Warranty
Thanks for your purchase! To fully benefit from the support that Larkbird offers, register your product at www.lark-bird.com/warranty to get a 6-Month Warranty extension .
www.lark-bird.com/warranty

100% Satisfaction

Any complaints after purchase, please feel free to contact the Larkbird customer support team directly to make things right.
support@lark-bird.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>