inphic DR01 Wireless BT Mouse Instruction Manual
- June 5, 2024
- inphic
Table of Contents
inphic DR01 Wireless BT Mouse
KEY DESCRIPTION
Tip: Long press the middle and right mouse buttons to adjust DPl
WIRELESS CONNECTION:
BT CONNECTION:
- Turn on the mouse.
- Click the button to switch to the desired BT mode (BT 5.0, the green light flashes slowly; BT 4.0, the blue light flashes slowlv)
- Long press for 3 seconds, the indicator light flashes quickly and enters the pairing mode
- Turn on the device’s BT search and Select the BT named BT5.0 Mouse or BT4.0 Mouse to Connect
Tip: BT 4.0/5.0 support: Windows 8, Windows 10, Android 5.0 and above, iOS13 and above, macOS X 10.10 and above conjuration requirements: BT 40 and ABC BT adapter
PACKAGE CONTENT
HOW TO USE
Wireless connections:
- Take out the receiver from the bottom of the mouse and plug the receiver into the USB port of your device.
- Turn on the switch on the bottom of the mouse to get started. (Please noted that one mouse is equipped with one specific USB receiver. Please keep the receiver well.)
BT connection:
- Tum on the BT mouse, and then press the switch mode button on the bottom of the device. 5.0 BT mode: Press and Switch the mode to BT 5.0(Greenlight wil blink slowly), Press the button again and hold around three seconds. The green light wil flash fast. 4.0 BT mode:Press and Switch the mode to BT 4.0(Blue light wil blink slowly), Press the button again and hold around three seconds. The Blue light will flashing fast.
- In a few moments, the BT device Named BT 5.0 Mouse /BT 4.0 Mouse shoud appear in the list of discovered BT devices. Select the device, and then click Continue to begin the pairing process.
- After completed Pairing,the corresponding indicator Iight will be on around 2 seconds and then tum off, that means the mouse can be used normaly. please Note that BT 5.0 mode do not support WIN7 systems).
TECHNICAL PARAMETERS
- Product Number: DR01
- Max acceleration: 14 inches/second
- Scroll Wheel (Y/N): Yes
- Wireless operating distance: 10 meters in open area and 5 meters in office
- BT technology: BT 5.0/BT 4.0
- Wireless technology: Advanced 2.4 GHz wireless connectivity
- Battery type: Li-polymer rechargeable battery
- Battery capacity: 500mAh
- Built-in battery voltage: 3.7V
- Rated operating current: s16mA
- Tracking System: Optical tracking
OPERATING SYSTEM
Windows 8, Windows 10, Android 5.0 and above IOS13 and above, Mac OS X 10.10 and above Chrome OS Linux kernel 2.6+2
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction