inphic M6P 2.4G Wireless Mouse Instruction Manual
- June 5, 2024
- inphic
Table of Contents
M6P 2.4G Wireless Mouse
Instruction Manual
KEY DESCRIPTION
Please Note: The USB Receiver is near the battery slot on the bottom of the mouse.
PACKAGE CONTENTS
- inphic Wireless Mouse
- USB Receiver
- Charging Cable
- Rechargeable Battery (included)
- User manual
HOW TO USE
Step 1: Take out the receiver from the bottom of the mouse and plug the receiver into the USB port of your device.
Step 2: Turn on the switch on the bottom of the mouse to get started. Please noted that one mouse is equipped with one specific USB receiver. Please keep the receiver well:
TECHNICAL PARAMETERS
- Product Number: M6P
- Max acceleration: 14 inches/second
- Scroll Wheel (YIN): Yes
- Wireless operating distance: 10 meters In open area and 5 meters in office
- Wireless technology: Advanced 2.4 GHz wireless connectivity
- Battery type: 802535 Li-On rechargeable
- Battery capacity 700mAh
- Built-in battery voltage: 3.7V
- Rated operating current .10mA
- Tracking System: Optical tracking
OPERATING SYSTEM
- Windows Vista, Windows 7, Windows 8, Windows 10
- Mac OS X 10.4 or later
- Chrome OS
- Linux kernel 2.6+
WARRANTY POLICY
CARE-FREE WARRANTY
If there is any defect or fault caused by defective material or workmanship of our product within 12 months from the date of purchase. and such defect or fault is notified by the Customer to the Company as soon as practicable, and upon the Company’s technician determining that such defect or fault is due to defective material or workmanship, then the Company agrees to replace such defective or faulty part(s) free of charge.no need to return the initial one, please email us for the guarantee service.
We’d Love to Hear From You!
Thank you for your recent purchase of our Inphic product. We hope you will be satisfied with both the product and service you received. If not, please give our helpful customer services team an opportunity to improve your experience right away. We are more than happy to help.
Meanwhile, we also welcome you to post a Product Review so that others can benefit from your experience. We sincerely appreciate your time and input. To submit your review, please follow the steps below:
- Log into your account on Amazon.com, click “Your Account” and then click “Your Orders”.
- Click on the specific Inphic product you purchased, and select the “Create your own review” button in the middle of the page
- Now post an informative review or even shoot a video to help it more visible
We’re always looking for ways to improve, so thanks again for your business, support and feedback. Warmest regards, Inphic Customer Support Team
[email protected]
www.inphic.com
INPHIC ELECTRONICS CO., LTD.
Address: 24/F, JInhua Building, Longfeng 3rd Road, Dalang Street,
Longhua District, Shenzhen, Guangdong, Chine Executive standard:
GB/726245-2010 Zip code:518110
Website: www.inphic.com
Email: [email protected]
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: — Reorient or relocate the receiving antenna. — Increase
the separation between the equipment and receiver. — Connect the equipment
into an outlet on a circuit different
from that to which the receiver is connected. — Consult the dealer or an
experienced radio/TV technician for help. The device has been evaluated to
meet general RF exposure requirement. The device can be u sed in portable
exposure condition without restriction