Jabra Pro 9460 Mono Wireless Headset Instructions
- June 16, 2024
- Jabra
Table of Contents
Jabra Pro 9460 Mono Wireless Headset
Product Information
Specifications
- Product Name: Jabra Pro 9460 Mono
- Compatibility: Works with most desk phones
- Microphone Position: Adjustable
- Noise Cancelling: Yes
- Microphone Volume Control: Yes
Product Usage Instructions
Adjusting Dial Tone Switch Settings
To ensure clear audio when using your headset with your desk phone, follow
these steps:
- Refer to the Jabra Compatibility Guide to determine the correct setting for your desk phone’s Dial Tone Switch. The guide can be found in the Quick Start Guide or user manual for your Jabra device.
- Locate the Dial Tone Switch on your Jabra Pro 9460 Mono headset.
- Select the appropriate setting based on your desk phone model:
- Switch A: Avaya and most other phones
- Switch B: Cisco, Avaya Callmaster 5 and 6
- Switch C: Kirk Delta
- Switch D: Tenovis
- Switch E: Innovaphone
- Switch F: Other phones
- Switch G: Toshiba (most models), Dealerboards (most models including IPC and BT)
Positioning the Microphone
To maximize speech quality and noise cancelling capabilities, position the
microphone close to your mouth. Follow these guidelines:
- If the microphone is adjustable, position it approximately 1 inch from your mouth.
- Ensure the microphone is pointing towards your mouth for optimal audio pickup.
Adjusting Microphone Volume
Match the volume level of the headset microphone to your desk phone’s audio
level. Use the Microphone Volume Control switch on the base of your Jabra Pro
9460 Mono headset to adjust the volume up or down as needed.
FAQ
-
Q: How do I adjust the Dial Tone Switch settings?
A: To adjust the Dial Tone Switch settings, refer to the Quick Start Guide or user manual for your Jabra device. The guide will provide specific instructions based on your Jabra Pro model. -
Q: How should I position the microphone for optimal audio quality?
A: Position the microphone approximately 1 inch from your mouth. Ensure it is pointing towards your mouth for the best audio pickup and noise cancellation. -
Q: How do I adjust the microphone volume?
A: Use the Microphone Volume Control switch on the base of your Jabra Pro 9460 Mono headset to adjust the volume up or down as needed. Match it to the audio level of your desk phone for clear communication.
Clear Audio
How do I ensure clear audio when I use my headset with my desk phone?
Ensure the Dial Tone Switch, microphone position, and microphone volume are
configured properly. Refer to the Quick Start Guide or user manual for your
Jabra device for specific instructions on how to adjust these settings.
- Adjust the setting for Dial Tone Switch to match your phone. You can verify the correct settings for your desk phone by using the Jabra Compatibility Guide. The following settings for Dial Tone Switch* will work in most cases.
- Switch A: Avaya and most other phones
- Switch B: Cisco, Avaya Callmaster 5 and 6
- Switch C: Kirk Delta
- Switch D: Tenovis
- Switch E: Innovaphone
- Switch F: Other phones
- Switch G: Toshiba (most models), Dealerboards (most models including IPC and BT)
*Switch options may vary depending on the product.
- Make sure the microphone is positioned close to your mouth to maximize speech quality and noise-cancelling capabilities. If the microphone is long enough, position it approximately 1 inch from your mouth.
- The volume level of the headset microphone should approximately match the audio level of your desk phone. Use the Microphone Volume Control switch on the base to adjust the volume up or down as needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>