Govee H7040 Beacon LED Camping Lantern User Manual
- June 5, 2024
- Govee
Table of Contents
H7040 Beacon LED Camping Lantern
User Manual
Safety Instructions
Read and follow all the safety instructions:
- Do not heat, open, puncture, or mutilate the camping light or dispose of it or its battery in fire.
- Avoid replacing the battery or placing it under direct sunlight for an extended period.
- Avoid charging the product in environments lower than 32°F (0°C) or higher than 113°F (45°C). Avoid using the product in environments below -4°F (-20°C) or above 140°F (60°C).
- Avoid using the product in environments where humidity is higher than 75%RH.
- Only use the provided charging cable to charge the product.
- Keep the product and all its components away from
- The waterproof and dustproof rating for this product is IPXS, which helps it withstand splashing water.
- Avoid scratching or puncturing the surface of this product with sharp objects.
- Avoid exposing the product to strong chemicals or corrosive liquids.
Introduction
Thanks for choosing the Govee Camping Light. This product has RGBWW lighting effects and can be controlled with the Govee Home app via Bluetooth connection. Ensure that your next camping adventure is unforgettable and well illuminated!
What You Get
Camping Light | 1 |
---|---|
Micro-USB Charging Cable | 1 |
Manual | 1 |
Service Card | 1 |
At a Glance
Using Your Camping Light
- When using the camping light for the first time, press and hold the On/Off Button for 3s to power it on. Later, you can short press to power it On/Off.
- Search ‘H7040’on the Govee Home app to pair via
- Brightness Adjustment: Press to cycle through 6 levels of
- Color Switch: Press to switch between different colors or color temperatures. Press and hold for 3s to send an SOS Press and hold again for 3s to stop the signal.
Installing Your Device
If you need to hang the light, ensure that the handle is lifted first. When placing the light on a flat surface, the handle will close on its own.
Pairing Your Device with the Gove Home App
What You Need:
A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or
above).
- Download the Gove Home app from the App Store (005 devices) or Google Play (Android devices).
- Turn on Bluetooth on your smartphone.
- Open the app, tap the “+” icon in the top right corner and search for “H7040”.
- Tap the device icon and follow the on-screen instructions to complete the pairing.
Specification
Color | RGBWW |
---|---|
Lithium Battery Capacity | 5000mAh |
Max Brightness | 200Im |
Battery Life | 5 hrs |
Charging Duration | 8 hrs |
Color Temperature Range | 2700K-6500K |
Waterproof | IPX5 |
Charging Method | Micro-USB |
Charging power | 5V2A |
Troubleshooting
-
Failed to pair to Bluetooth
• Ensure the device is powered on.
• Restart the device. -
The color switch button is not working.
• Restart the device.
• You can also change colors with the Govee Home app. -
The indicator light has dimmed and the device does not work.
• Press and hold the On/Off button for 3s to activate the
• Recharge the device. -
The battery indicator light is not working.
• Restart the device.
• You can check the battery status with the Govee Home app.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee @govee_official @govee.official @Goveeofficial @Govee.smarthome
FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment.
The Bluetooth° word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Shenzhen Intellirocks Tech.
Co., Ltd. is under license.
Gove is a trademark of Shenzhen Intellirocks Tech Co., Ltd. Copyright 02021
Shenzhen Intellirocks Tech Co., Ltd.
All Rights Reserved.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Non-replaceable light source.
https://www.govee.com/apps/qrcode
For FAQs and more information, please visit: www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>