babylo 107993 Plum Travel System Instruction Manual
- June 5, 2024
- babylo
Table of Contents
babylo 107993 Plum Travel System
Parts
Assembly
Assembly
Assembly
Canopy Adjustment
Foot Adjustment
Brakes
Swivel Wheels
Backrest Adjustment
Harness
Harness
Travel System
Folding
Assembly
-
Unpack all contents and check that all parts are present before starting assembly. Please refer to the parts list. Release the pushchair (A) from the locked position by lifting the locking catch from over the locking rivet on the pushchair frame. ,,
Note. You may have to squeeze the legs and handles together first so as to release the tension on the rivet. Standing behind the pushchair and holding it by the handle, lift the handle upwards to unfold the frame. -
Assemble the rear wheels. Place one metal washer (F) onto the end of the rear axle (E). Place one wheel (C) followed by one plastic eye splice (G) and one plastic cap (H). Finally attach the round cap (I) as illustrated. Repeat for the other side.
-
Fit the assembled rear wheel axle to the pushchair. Insert the ends of the tubing into the housing located on the assembled rear wheel axle. Push upward until you hear it lock and ‘click’ into position.
-
Attach the front wheels (D). Insert wheel housing onto the front leg and push upward until you hear it ‘click’ into position. Repeat for other leg.
-
Assemble the bumper bar (B) to the front of the pushchair. Attach the bumper bar connector posts to the frame. Push in the locking clip to secure. Repeat for both sides of the bumper bar. Lift up the locking clip and pull bumper bar away from the pushchair to remove. Ensure both clips are released before trying to remove bumper bar.
Canopy Adjustment
The canopy can be opened or closed by pulling or pushing on the canopy rim. There is also a viewing window located at the top of the canopy and a pocket at the rear of the canopy.
Footrest Adjustment
Press on each adjuster in turn while simultaneously pressing down or pulling up lightly on the footrest.
Brakes
To engage the brake push down the brake locking bar. Lift up bar to release
brake.
. & _ WARNING!
Always engage wheel brakes when the pushchair is not moving.
Swivel Wheels
The pushchair has lockable front swivel wheels. To lock swivel wheels press the pedal down. Repeat on both wheels. Push up to release and engage swivel wheel.
Backrest Adjustment
Locate the backrest adjustment mechanism at the rear of the seat. Squeeze the
clip on the reclining harness and gently lower the backrest. Alternatively,
squeeze the clip on the reclining harness and gently pull up the backrest to
the desired height.
, &_ WARNING!
Always ensure that the seat is securely fixed in position before use.
Harness
- A five-point safety harness is provided to restrain your child and should always be worn. To fasten, push the side clips into the centre buckle.
- Press the side clip prongs and remove from buckle to release the buckle.
- Sliding adjusters are fitted and should be adjusted to suit your child. ‘.’
. &_ WARNING!
Always adjust the harness to fit your child correctly for their comfort and
safety. A loose fitting harness can be very dangerous.
Travel System
The car seat (J) can be fitted to the pushchair to create a travel system.
- Adjust the pushchair backrest to the lowest recline position and fold the canopy.
- Lower the car seat onto the pushchair ensuring to attach the connectors located both sides of the car seat to the frame. Ensure the car seat’clicks’ into place.Lift the car seat gently by the handle to check the car seat has locked into place.
- Refer to the car seat manual and adjust the car seat handle to position (C).
.&_ WARNING!
Ensure the car seat base aligns with the bumper bar and the car seat connectors are correctly engaged before use.
Travel System (Detach)
- Refer to the car seat manual and rotate the car seat handle to the carrying position (B).
- Pull out the car seat connector from the pushchair frame to release the connector from the holding pin. Repeat for both sides of the pushchair.
- Lift the car seat away from the pushchair.
. &_ WARNING!
- The car seat must be rear-facing.
- The car seat does not replace a cot or bed. Should your child need to sleep then it should be placed in a suitable pram body or cot.
- The car seat is compatible with the Babylo Plum pushchair only.
- DO NOT use car seat with another model pushchair.
Folding
NOTE. Remove all items from the basket before attempting to fold.
NOTE. If using with car seat, ensure it has been removed before folding.
Lock swivel wheels, fold the canopy and engage the brake. Pull both fold
release triggers towards you. Push the handle downwards gently and lower the
pushchair to a close. Engage the locking catch .
.&_ WARNING!
Always fold your canopy before folding the pushchair. Due care should be taken
when folding and unfolding pushchair.
Safety
IMPORTANT : RETAIN FOR FUTURE REFERENCE -READ CAREFULLY. THE CHILD MAY BE
HURT IF YOU DO NOT FOLLOW THESE INSTRUCTIONS .
WARNING! This vehicle is intended for one child from birth (0 months) and
up to a maximum weight of 15kg. ;, WARNING! Never leave the child unattended.
WARNING! Ensure all locking devices are engaged before use. WARNING! To avoid
injury ensure that your child is kept away when unfolding and folding this
product.&. WARNING! Do not let your child play with this product.&. WARNING!
ALWAYS USE THE RESTRAINT SYSTEM. .&. WARNING! Always use the crotch strap in
combination with the waist belt section of the harness. .&. WARNING! Check
that the pram body or seat unit attachment devices are correctly engaged
before use. & WARNING! This product is not suitable for running or skating.
Safety
- Adult assembly is required.
- Use the most reclined position for new born babies.
- Ensure that the parking brake is engaged during the loading and unloading of children.
- The basket can carry a maximum load of 2kg.
- The hood pocket can carry a maximum of 0.5kg.
- Any load attached to the handle and/or on the back of the backrest and/or on the sides will affect the stability of the product.
- Do not overload the pushchair with additional children, goods or accessories.
- Do not use this product if any part is broken, torn or missing.
- Always use the restraint system. Ensure it is correctly fitted at all times.
- Always apply the parking brake when the pushchair is stationary.
- Never leave a rain cover, hood or apron on the product indoors, in a hot atmosphere or near a heat source, as the child may overheat.
- Take care when going up or down curbs.
- Any additional or replacement parts should only be obtained from the
- manufacturer or distributer.
- Never substitute parts.
- Keep the plastic packaging away from children to avoid danger of suffocation.
- Take extra care in windy conditions .
- Remove your child and fold the pushchair when going up or down stairs or escalators
- Do not use this pushchair near an open fire or exposed flame.
- To prevent damage, always remove a raincover before folding the pushchair.
- For the car seat used in conjunction with the pushchair, this vehicle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed .
This product conforms to EN 1888: 2012
Care
Maintenance
- The product requires regular maintenance to ensure correct and safe performance.
- Regularly inspect the wheels, locks, brakes, harness, catches, seat adjusters, joints and fixings to ensure they are clean, operating correctly and in full working order. Replace tyres if they are excessively worn.
- Do not use this product if any part is broken, torn or missing and use only spares provided by the manufacturer.
- If parts become stiff or difficult to operate, ensure dirt is not the cause, then try a light application of a silicon lubricant, ensuring it penetrates between the components.
- Regular lubrication of moving parts will extend the life of your product and make opening and folding easier.
- Your pushchair should be serviced and reconditioned before using for a second baby, or within 18 months, whichever is sooner.
- After exposure to damp conditions, dry off with a soft cloth and leave fully open in a warm environment. Storing damp will encourage mildew to form. Store in a dry place.
- Do not leave in sunlight for prolonged periods -some fabrics may fade.
Cleaning
- Fabrics: Spot clean only. Use mild soap or upholstery shampoo. NEVER use bleach. Dry in shade thoroughly before reuse and avoid direct heat and sunlight. Do not iron. Do not dry clean :,
- Frame: Wipe the frame with a soft clean cloth and mild soap. NEVER use bleach.
- Never clean any part of the pushchair with abrasive, ammonia-based, bleach-based or spirit-type cleaners.
- Ensure the product is fully dry before use or storage.
- Always ensure the pushchair is stored in a dry place to prevent mold or mildew from developing. Store away from any heat sources and not in the sun.