Sanmenxia Shifa Chaju FL021 Rechargeable Retractable Pole LED Floor Lamp Instruction Manual
- June 5, 2024
- Sanmenxia Shifa Chaju
Table of Contents
Sanmenxia Shifa Chaju FL021 Rechargeable Retractable Pole LED Floor Lamp
Operating Instructions
NOTICE : risk of material and property damage
- Do not connect the product to a computer, as the high charging current could damage the computer.
- Do not use if there is visible damage to the product or the connection.
- Do not cover the product during operation, and ensure that
- Protect the product from: impact, direct sunlight, sub-zero temperatures.
- Do not place any heavy objects on the product or its connection.
- Lay the connection in such a way that it is not crushed or bent and does not come into contact with hot surfaces.
- Unplug the power adapter from the outlet before a storm.
- Only use original accessories from the manufacturer so as not to impair the functioning of the product and to prevent possible damage.
- To protect the surface, do not use corrosive or abrasive cleaners.
Included in delivery
- 1 x Floor lamp with pole and base plate
- 1 x USB Charging Cable
- 1 x English User Manual
- 1 x RF Remote Controller
- 1 x Package of Screws
Check the scope of delivery for completeness, and the components for transport damage. If the product is damaged, do not use the product, but contact customer service immediately. A USB mains adapter (DC 5 V 1A) is also required. This is not included in the delivery!
Product overview
- Lamp head
- LED
- Flexible lamp neck
- Control center and Indicator light
- Socket
- Retractable Pole
- Base plate
Control Panel Usage
BEFORE FIRST USE
- Remove any packaging films, stickers or transport protections from the product. Never remove the type labels!
- Screw the retractable pole (6), and the base plate (7) together. Charge the battery (see the chapter “Charging the battery”).
Charging the battery
- Use a USB mains adapter that is designed for 5 V and at least 1000 mA. Do not connect to a computer!
- Make sure the power outlet the USB mains adapter is pluggedinto has been properly installed. The socket must be easily ac-cessible, so that the power connection can be quickly discon-nected.
- Connect the USB cable to the lamp’s socket (5)and a USB mains adapter. Plug the USB mains adapter into a socket.
- The blue indicator light (4) blinks when the battery is low.
- While charging,the blue indicator light (4) breathing effect.
- When the indicator light stays blue,the battery is fully charged.
- After charging, unplug the USB mains adapter from the socketand then the USB cable from the lamp’s socket.
Remote Usage
Wifi Usage
- 1. App download: Download in the app market: Smart Lift-Smart Living
- Register as a member
- Touch the night light key for 5 seconds. The App function is turned on when the light flashes.If you don’t want to use the App, touch any key to exit.
- Turn on the Bluetooth of the mobile phone and add the searched product: LPS-Floor-Lamp, and then you can control the light.
Technical data
- model number: LFL0221
- Color temperature: 700K/3000K/4200K/5500K/6500K
- Brightness: Max. 800 lm
- Ra: >85
- Power supply: DC 5V 1V
- Battery Capacity: LiPo battery 3.7 V 4500 mAh
- Charging time: approx 8 hours
- Operational life: approx 5-6 hours with one charge
- up to 20 hours depending on the brightness level Power:
Components
Installation Procedure
Adjust the height what your want
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>