YUNQI YQ101009 Smart WiFi Photo Frame User Manual
- June 5, 2024
- YUNQI
Table of Contents
YUNQI YQ101009 Smart WiFi Photo Frame
User Manual
- POWER Afterconnectingpoweradapter,pleasepressandholdpowerbuttonforapproximately5 seconds(until screen turns on). Whenitison,pressandholdpowerbuttonforapproximately3secondstoaccessreboot or power off menu.Short press on power button will turn off/onscreen(but leave the photo frame in on position).
- USB Connect a USB flash drive. USB is for service use only.
- RESET Use a needle or paper clip to reset unit.
- MicroSD card Loadexternalmax32GBmicroSDmemorycardhere.
- DC Connect DC adapter to power on the device.
Getting started
Thank you for purchasing your very own frameo.
First,tosetupyourframefollowthe’Quickstartguide’includedinthepackage.Ifyouare
newtousingframeothenstartbyfollowingtheframeoquicksetuponpageorfollowthe
on screen guide when powering it on for the first time.
OnceyouhavesetupyourFrameoframe,startconnectingittoyourfriendsandfamily.
Frameo app
Tosendphotostoyourframe,usetheframeoappforiOSorAndroid
Find the frameo app on:
Frameo quick setup
When starting your frame for the first time, you will need to setup the frame.
- First you start by selecting a language. This will be the language used throughout frameo.
- Connect your frame to the internet by connecting it to a Wi-Fi. lfa newer version of the frameo software is available, then you willbe prompted with an update dialog. It is recommended to update your frame immediately if prompted.
- Enter your name, and the location where you have placed your frame eg Living room’, “Kitchen” or “Office” and finally set the timezone if not correct
Start using frameo
Start by connecting with your friends and family by providing them with a
unique code from your frame. If you want to be able to send photos to the
frame yourself, start by downloading the app for iOS or Android on App Storeor
Google Play. Then use the code to connect your frame and app as described
below.
Connecting a new friend:
- Make sure that your friend has downloaded and installed the frameo app
- Click the add friend icon on your frame A dialog will appear showing aunique code which is valid for 12 hours.
- Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone cal to your friend.
- Once your friends have added the code in their frameo app, they will automatically appear on your frame and be able to send you photos.
Navigating your frameo
You interact with your frame through its touchscreen. Swipe left or right to go through your photos. To access the menu bar, simply tap once on the screen, this will shew the menu. In the cca menu you will find quick access to the add friends dialog and the settings menu From the menuit is also possible to hide the currently shown photo and to adjust the positioning of the photo.
Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name: Changes the name of your frame. This is also the name the
connected friends and family will see in their list of connected frames.
Frame location: Changes the location of your frame. This is the location
displayed on your friends’ and family’s list of connected frames which can
help to distinguish frames from each other.
Set language: Sets the language throughout your frame. Set time zone Sets
the timezone that should be used on your frame.
Sleep mode: frameo offers a sleep mode which turns off the screen to
reduce power consumption while you e.g. are sleeping. Its detault seting is to
turn off the screen at 23:00 and turn on the screen again at 07:00. To change
this just set the sleep mode start/end time. Your frame is not powered down or
in standby, som you will still be able to receive photos during sleep mode.
Manage photos
Show/hide photos: Select which photos to hide by tapping the particular
photos you wish to hide. Hidden photos will NOT be deleted from your frame,
you can always select them to be shown again. Use to hide or show all photos.
Delete photos: Select ohotos that you want to permanently delete from
your frame by tapping the photo. Use to select or deselect all and to delete
the selected photos
Import photos: Allows you to import photos from an external max 32GB SD
card Before you try to import photos from a SD card, make sure you have a SD
card with photos on inserted into your tframe. Start by selecting the photos
that you want to import onto your frame. Once selected tap the import button
to start the import process. It is currently not possible to add a caption or
define the most important part of the photo when using the import function.
Altermatively add yourself to your friend list and send them using the app.
My Friends
This list contains all the people that are allowed to send photos to your
frame.
Remove person: To remove a person from this list, thereby removing their
permission to send you photos, tap the delete icon You will then be asked to
confirm the removal and if you would like to remove all photos received from
this person.
Add person To allow a new person to send you photos, simply tap the add
friend button + and share the presented code in whatever way you prefer.
Display and slideshow
Timer: Define the duration a photo should be displayed.
Show caption: Sets whether or not to display the captions that your
friends have sent with the photo. Check to display captions. Uncheck to hide
captions.
Brightness level: Adjust the brightness level of the screen.
Wi-Fi
Set which Wi-Fi the frame should be connected to. If you are connecting to a network with a captive portal a web browser icon should appear in top right corner of the screen. Use this to open a browser where you can enter credentials to accesS the network.
Backup and Restore
Backup frame to max 32GB microSD card.
Tap to make a backup of your photos, friends and settings. The time of latest
successful backup will be displayed.
Any existing backup on the SD card will be overridden!
Automatic backup: If checked, your frame will automatically take a backup
within 30 hours of you receiving new photos or making changes on your frame.
Restore from backup: Before you attempt to restore your frame, start by
confirming that your backup is up-to-date To restore from a backup, you must
first reset the frame. It is important to note that you cannot restore to a
new Frameo frame and keep the old frame operational at the same time.
Reset frame: Removes all data from your frame. This will permanently
remove all your photos, friends/connections and settings.
About
Check for update
Check if an update is available for your frame.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously with improving the
frameo software. We understand if you do not wish to share this data with us.
Set checked if you wish to help us improve frameao. Set unchecked to deny the
sharing of anonymous analyt ics data.
Guide
Opens the quick start guide, that was shown when you first started the frame.
Privacy
For more information regarding privacy, please visit http: ”
privacy.frameo.net
Warning
This device complies with Part 15 of the FCC Rules. Operation is subjcct to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must acccpt any interference received,
including interference that may cause undesired operation changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This cquipmcnt generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may causc hamful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determincd by
turning the cquipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation betwecn the cquipment and receiver.
- Connect the cquipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelincs, This cquipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>