Hisense TX7663BU55T BT/WiFi Module User Manual
- June 6, 2024
- Hisense
Table of Contents
Hisense TX7663BU55T BT/WiFi Module
The product description
The user can achieve TV connection WIFI net, through this module and the voltage supplied by the system to the module needs to be transmitted by a voltage regulator or circuit This equipment may be operated in all European countries.
Basic parameters
| Feature Description | Feature Description |
|---|---|
| Model | TX7663BU55T |
| Product Name | BT/WiFi Module |
| FCC ID | SARMWH515S |
| IC ID | 27123-MWH515S |
| Interface | USB2.0 |
| Supply Voltage | 3.3V±0.33V |
| Dimension | 23（mm）21.5（mm）2.5(mm） |
| Operating Temperature | -10°C to 70°C |
| Storage Temperature | -40°C to 85°C |
RF output power
| Band | Limited power | |
|---|---|---|
| WlAN | 2412MHZ-2472MHZ | < 20 |
5150MHZ-5850MHZ
The display method of Model approved code
In the factory， the model approve code is pasted on the back shell in a label
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However， there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules. This equipment should be installed and operated with a minimum distance of 20 in (50cm) between the radiator and your body. This transmitter must not be co- located or operated in conjunction with any other antenna or transmitter.
CAUTION:
To comply with the limits of the Class B digital device pursuant to Part 15
of the FCC Rules, this device is compliant with Class B limits. All
peripherals must be shielded and grounded. Operation with non-certified
peripherals or non-shielded cables may result in interference to radio or
reception
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly
approved by the grantee of this device could void the users authority to
operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 50 cm(8 in )between the radiator and your body NOTE To
satisfy FCC exterior labeling requirements, the following text must be placed
on the exterior of the end product Contains Transmitter Module FCC ID: To
satisfy IESD exterior labeling requirements, the following text must be placed
on the exterior of the end product ” Contains Transmitter Module IC:This
symbol on the product or on its packaging indicates that this product must not
be disposed of with your household waste. Instead, it is your responsibility
to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product. The device is
restricted to indoor use only when operating in the 5150 to 5350 MHz frequency
range. 
IC Statement
- the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Footnote4
- for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
- for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
- where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:
“Operation is subject to the following two conditions: this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>