PROAIM TP-ALPA-02 Alpha Mobile Workstation Instruction Manual

: June 3, 2024
: PROAIM

Table of Contents

**
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**

PROAIM TP-ALPA-02 Alpha Mobile Workstation

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

PROAIM TP-ALPA-02 Alpha Mobile Workstation 01

Alpha Docking Universal Support Stand with 5/8″ Baby Pin Mount
VESA Monitor Mount
Proaim Alpha 3 x Wheels with Brakes
1 x Hook
Proaim Alpha Workstation Tray
1 x Workstation Tray Holder
Proaim Alpha Tool Tray

Alpha Stand Setup

Loosen the knob of the Alpha stand and spread its legs on the floor (as per your requirement).
Secure the legs with the help of knobs at the top and bottom.
Loosen the knob to adjust the stand height as per your need and tighten the knob back, as shown in the image.

NOTE:
The Alpha Stand has 3 sections to adjust the height with quick & secure locking knobs. The central main post of the stand is adjustable, through which you can change its height as you require.

Alpha Wheels Setup

Using an Allen key, loosen the bolts of the Alpha wheels.
Properly insert the alpha wheels into the Alpha support stand.

NOTE:
It is a set of three pneumatic wheels that revolve 360°, offering great mobility.

After inserting the Alpha wheels, properly secure them with the help of an Allen key and push the locking lever to stabilize the wheel.

NOTE:
Each wheel is secured to the standing leg with a locking lever and has a specially designed footbrake that keeps the stand completely steady, stable, and secure for reliable parking.

Roll your stands smoothly around a set or location with Proaim Wheel Set, which combines perfectly with Proaim Alpha Support Stand and any 1×1″ Square Legs Stands.

Alpha Workstation Tray Setup

Loosen the clamp knob of the workstation tray holder and then mount it onto the alpha support stand.
After mounting the workstation tray holder, tighten the clamp knob.

NOTE:
It’s tool-less mounting clamps make it super quick to connect, adjust & disconnect from a stand without hassle. PROAIM TP-ALPA-02 Alpha Mobile
Workstation 21 NOTE:
Proaim Alpha Workstation/Case Tray transforms your C-Stand into the best standing & moving laptop workstation that you can take where your work requires it to be.

Alpha Tool Tray Setup

Mount the Alpha tool tray by sliding it onto the leg of the Alpha support stand and secure it properly by tightening the knob.

NOTE:
In order to mount, you just need to slide and attach it over the leg-straps of the Alpha stand & tighten with four knobs at the back.

Proaim Alpha Tool Tray lets you keep your all essential & frequently used production tools near & organized.

NOTE:
It’s all set to hold your block batteries, small-sized RAID systems, Allen keys & other essential tools. PROAIM TP-ALPACA-02 Alpha Mobile Workstation
25

VESA Monitor Mount Setup

Mount the monitor mount on the stand and secure it completely.

NOTE:
Monitor Mount provides an additional 3/8”-16 thread on the top for accessory mounting, e.g. Compatible LCD arms, mounts, etc. PROAIM TP-ALPA-02 Alpha
Mobile Workstation 26

Loosen the side knob of the stand mounting clamp as per your requirement.
By loosening the side knob, you can move the monitor mount up to 180° up-down, as shown in the images.
Loosen and remove the knob from the other side of the stand mounting clamp and loosen the inbuilt bolt using an Allen key.
After loosening the inbuilt bolt, you can rotate the monitor mount up to 360°, as shown in the images.
After the rotation, tighten the bolt and re-attach the knob.
Remove the monitor mount from the stand mounting clamp and attach it to the LCD.
Bolt-together the LCD and the monitor mount and then attach it to the stand mounting clamp.
Once the monitor mount is attached to the stand mounting clamp, secure it properly using an Allen key as shown in the image.

Your setup is now ready.

Alpha Camera Stand also supports photo equipment & lighting accessories like reflec-tors, soft boxes, lights, utility trays, work-stations, and many more.

NOTE:
The Stand has 5/8″ baby pin mount on the top to attach the camera stabilizer system & gimbals with their support accessories.

Warranty

We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.